[ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Thu Mar 28 16:05:00 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14197K kernel code, 1470K rwdata, 2740K rodata, 400K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.00 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945530245 ns [ 0.000501] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421943804ns [ 0.029741] Console: colour dummy device 80x25 [ 0.031922] printk: console [tty0] enabled [ 0.033849] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Thu Mar 28 16:05:00 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14197K kernel code, 1470K rwdata, 2740K rodata, 400K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.00 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945530245 ns [ 0.000501] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421943804ns [ 0.029741] Console: colour dummy device 80x25 [ 0.031922] printk: console [tty0] enabled [ 0.033849] printk: bootconsole [uart8250] disabled [ 0.039834] Calibrating delay loop... 789.70 BogoMIPS (lpj=3948544) [ 0.082443] pid_max: default: 32768 minimum: 301 [ 0.085811] LSM: initializing lsm=capability,landlock,integrity [ 0.087232] landlock: Up and running. [ 0.094115] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.094534] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.187979] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.188956] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.190978] Performance counters: No available PMU. [ 0.193895] rcu: Hierarchical SRCU implementation. [ 0.194093] rcu: Max phase no-delay instances is 1000. [ 0.213294] smp: Bringing up secondary CPUs ... [ 0.214173] smp: Brought up 1 node, 1 CPU [ 0.245452] devtmpfs: initialized [ 0.265138] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.265756] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.287860] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.747850] raid6: int32x8 gen() 130 MB/s [ 1.097664] raid6: int32x4 gen() 297 MB/s [ 1.447136] raid6: int32x2 gen() 403 MB/s [ 1.794692] raid6: int32x1 gen() 313 MB/s [ 1.795056] raid6: using algorithm int32x2 gen() 403 MB/s [ 2.143904] raid6: .... xor() 212 MB/s, rmw enabled [ 2.144329] raid6: using intx1 recovery algorithm [ 2.151972] SCSI subsystem initialized [ 2.153681] usbcore: registered new interface driver usbfs [ 2.167934] usbcore: registered new interface driver hub [ 2.168547] usbcore: registered new device driver usb [ 2.169705] pps_core: LinuxPPS API ver. 1 registered [ 2.169854] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.170259] PTP clock support registered [ 2.250700] PCI host bridge to bus 0000:00 [ 2.251595] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.252906] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.253334] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.257076] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.269616] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.270121] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.270495] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.270714] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.270967] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.271198] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.277528] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.290443] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.291324] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.291697] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.291891] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.292131] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.292329] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.293382] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.293763] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.295257] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.296456] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.296795] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.298275] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.298514] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.298853] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.299110] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.311164] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.311539] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.311874] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.312216] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.313353] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.313634] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.313901] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.314957] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.315217] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.315491] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.317323] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.330859] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.331810] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.332142] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.332395] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.332814] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.333072] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.333382] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.333670] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.333889] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.334069] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.334258] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.334442] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.343194] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.343556] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.343800] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.344080] vgaarb: loaded [ 2.368487] clocksource: Switched to clocksource MIPS [ 2.475831] NET: Registered PF_INET protocol family [ 2.479108] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.498355] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.498889] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.499217] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.499778] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.500225] TCP: Hash tables configured (established 2048 bind 2048) [ 2.503204] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.503934] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.508282] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.515316] RPC: Registered named UNIX socket transport module. [ 2.515647] RPC: Registered udp transport module. [ 2.515778] RPC: Registered tcp transport module. [ 2.515902] RPC: Registered tcp-with-tls transport module. [ 2.516025] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.518192] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.520347] PCI: CLS 0 bytes, default 16 [ 2.540091] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.554090] NFS: Registering the id_resolver key type [ 2.557287] Key type id_resolver registered [ 2.557543] Key type id_legacy registered [ 2.563377] Key type cifs.idmap registered [ 3.209378] xor: measuring software checksum speed [ 3.230990] 8regs : 480 MB/sec [ 3.254047] 8regs_prefetch : 447 MB/sec [ 3.276909] 32regs : 449 MB/sec [ 3.300939] 32regs_prefetch : 426 MB/sec [ 3.301283] xor: using function: 8regs (480 MB/sec) [ 3.302292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.302770] io scheduler mq-deadline registered [ 3.303020] io scheduler kyber registered [ 3.926260] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 3.933812] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 3.936420] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 3.944966] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.964144] printk: console [ttyS0] disabled [ 3.999498] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.999874] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 4.003671] printk: console [ttyS0] enabled [ 4.148514] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.149351] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 4.150577] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 4.165806] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 4.171224] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 4.173771] [drm] Found bochs VGA, ID 0xb0c5. [ 4.174558] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 4.185579] [drm] Found EDID data blob. [ 4.205669] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 4.613756] Console: switching to colour frame buffer device 160x50 [ 4.681097] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 4.757336] brd: module loaded [ 4.760216] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 4.772403] virtio_blk virtio2: [vda] 1139886 512-byte logical blocks (584 MB/557 MiB) [ 4.836481] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 4.841150] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 4.845075] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 4.867045] hub 1-0:1.0: USB hub found [ 4.870074] hub 1-0:1.0: 2 ports detected [ 4.893392] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.895158] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.906726] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.916009] usbcore: registered new interface driver usbhid [ 4.917624] usbhid: USB HID core driver [ 4.924530] u32 classifier [ 4.925768] input device check on [ 4.926892] Actions configured [ 4.930962] NET: Registered PF_INET6 protocol family [ 4.947696] Segment Routing with IPv6 [ 4.949009] In-situ OAM (IOAM) with IPv6 [ 4.950884] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.963448] NET: Registered PF_PACKET protocol family [ 4.966253] Bridge firewalling registered [ 4.970776] Key type dns_resolver registered [ 4.973666] NET: Registered PF_VSOCK protocol family [ 5.034071] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 5.097090] registered taskstats version 1 [ 5.168996] Key type .fscrypt registered [ 5.181206] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 5.218195] Key type fscrypt-provisioning registered [ 5.266414] Btrfs loaded, zoned=no, fsverity=no [ 5.355059] Key type encrypted registered [ 5.384933] printk: console [netcon0] enabled [ 5.414699] netconsole: network logging started [ 5.533468] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 5.548597] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 5.742061] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 5.902619] IP-Config: Complete: [ 5.944519] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 5.998624] host=192.168.7.4, domain=, nis-domain=(none) [ 6.038231] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 6.038476] nameserver0=8.8.8.8 [ 6.151013] clk: Disabling unused clocks [ 6.222213] md: Waiting for all devices to be available before autodetect [ 6.276431] md: If you don't use raid, use raid=noautodetect [ 6.318229] md: Autodetecting RAID arrays. [ 6.356230] md: autorun ... [ 6.368370] md: ... autorun DONE. [ 6.519410] EXT4-fs (vda): mounted filesystem a965b586-2615-42c0-808a-1689c12a97e5 r/w with ordered data mode. Quota mode: disabled. [ 6.530497] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.564623] devtmpfs: mounted [ 6.704699] Freeing unused kernel image (initmem) memory: 400K [ 6.742276] This architecture does not have kernel memory protection. [ 6.781122] Run /sbin/init as init process [ 6.876647] process '/sbin/init.sysvinit' started with executable stack [ 13.609608] udevd[92]: starting version 3.2.14 [ 13.856933] udevd[93]: starting eudev-3.2.14 [ 34.140598] EXT4-fs (vda): re-mounted a965b586-2615-42c0-808a-1689c12a97e5 r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.23-yocto-standard #1 SMP PREEMPT Thu Mar 28 16:05:00 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 10 12:55:18 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-e36fcdbcebe6d8fb17c5e96d68ab5578e844a877 qemumips /dev/ttyS0 qemumips login: