[ 0.000000] Linux version 5.15.150-yocto-standard (oe-user@oe-host) (i686-poky-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Mar 11 14:54:28 UTC 2024 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr b7a7001, primary cpu clock [ 0.000002] kvm-clock: using sched offset of 709228515 cycles [ 0.000004] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000009] tsc: Detected 2599.996 MHz processor [ 0.000706] last_pfn = 0x1ffd8 max_arch_pfn = 0x100000 [ 0.000741] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.003966] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f] [ 0.004009] ACPI: Early table checksum verification disabled [ 0.004013] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS ) [ 0.004021] ACPI: RSDT 0x000000001FFE246E 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004027] ACPI: FACP 0x000000001FFE224E 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004035] ACPI: DSDT 0x000000001FFE0040 00220E (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004039] ACPI: FACS 0x000000001FFE0000 000040 [ 0.004043] ACPI: APIC 0x000000001FFE2342 000090 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004047] ACPI: HPET 0x000000001FFE23D2 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004051] ACPI: MCFG 0x000000001FFE240A 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004055] ACPI: WAET 0x000000001FFE2446 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004059] ACPI: Reserving FACP table memory at [mem 0x1ffe224e-0x1ffe2341] [ 0.004060] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe224d] [ 0.004062] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.004063] ACPI: Reserving APIC table memory at [mem 0x1ffe2342-0x1ffe23d1] [ 0.004064] ACPI: Reserving HPET table memory at [mem 0x1ffe23d2-0x1ffe2409] [ 0.004065] ACPI: Reserving MCFG table memory at [mem 0x1ffe240a-0x1ffe2445] [ 0.004066] ACPI: Reserving WAET table memory at [mem 0x1ffe2446-0x1ffe246d] [ 0.004076] 0MB HIGHMEM available. [ 0.004078] 511MB LOWMEM available. [ 0.004079] mapped low ram: 0 - 1ffd8000 [ 0.004080] low ram: 0 - 1ffd8000 [ 0.004082] Zone ranges: [ 0.004083] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004085] Normal [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.004087] HighMem empty [ 0.004088] Movable zone start for each node [ 0.004089] Early memory node ranges [ 0.004090] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004091] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.004093] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.025024] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.025157] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.047567] Using APIC driver default [ 0.047998] ACPI: PM-Timer IO Port: 0x608 [ 0.048002] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.048008] Intel MultiProcessor Specification v1.4 [ 0.048009] Virtual Wire compatibility mode. [ 0.048013] MPTABLE: OEM ID: BOCHSCPU [ 0.048014] MPTABLE: Product ID: 0.1 [ 0.048015] MPTABLE: APIC at: 0xFEE00000 [ 0.048022] Processor #0 (Bootup-CPU) [ 0.048058] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.048062] Processors: 1 [ 0.048063] TSC deadline timer available [ 0.048066] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.048083] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.048085] Booting paravirtualized kernel on KVM [ 0.048088] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.048093] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.048198] percpu: Embedded 32 pages/cpu s102156 r0 d28916 u131072 [ 0.048222] kvm-guest: stealtime: cpu 0, msr 1fac3a40 [ 0.048226] Built 1 zonelists, mobility grouping on. Total pages: 129654 [ 0.048228] Kernel command line: root=/dev/vda rw clocksource=kvm-clock hpet=disable noapic nolapic ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.048611] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.048695] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.067182] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.067190] Initializing HighMem for node 0 (00000000:00000000) [ 0.067965] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.067975] Memory: 496660K/523736K available (12243K kernel code, 1551K rwdata, 3160K rodata, 876K init, 548K bss, 27076K reserved, 0K cma-reserved, 0K highmem) [ 0.075368] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.075382] ftrace: allocating 44167 entries in 87 pages [ 0.094974] ftrace: allocated 87 pages with 5 groups [ 0.095029] trace event string verifier disabled [ 0.113260] rcu: Preemptible hierarchical RCU implementation. [ 0.113265] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.113267] All grace periods are expedited (rcu_expedited). [ 0.113268] Trampoline variant of Tasks RCU enabled. [ 0.113269] Rude variant of Tasks RCU enabled. [ 0.113270] Tracing variant of Tasks RCU enabled. [ 0.113271] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.113272] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.119658] NR_IRQS: 2304, nr_irqs: 256, preallocated irqs: 16 [ 0.119965] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.119980] random: crng init done [ 0.125596] Console: colour VGA+ 80x25 [ 0.209237] printk: console [ttyS0] enabled [ 0.209787] ACPI: Core revision 20210730 [ 0.210343] ACPI: setting ELCR to 0200 (from 0c00) [ 0.210968] APIC disabled via kernel command line [ 0.211607] APIC: Keep in PIC mode(8259) [ 0.212134] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.213458] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.215485] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.217459] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.218461] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.219461] Spectre V2 : Mitigation: Retpolines [ 0.220459] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.221459] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.222459] Speculative Store Bypass: Vulnerable [ 0.223047] L1TF: Kernel not compiled for PAE. No mitigation for L1TF [ 0.223459] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.224459] MMIO Stale Data: Unknown: No mitigations [ 0.225459] SRBDS: Unknown: Dependent on hypervisor status [ 0.226182] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.226459] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.227459] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.228460] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.229459] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.234945] Freeing SMP alternatives memory: 48K [ 0.235461] pid_max: default: 32768 minimum: 301 [ 0.236094] LSM: Security Framework initializing [ 0.236468] landlock: Up and running. [ 0.236966] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.237461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.239568] smpboot: SMP disabled [ 0.240168] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.240477] signal: max sigframe size: 1760 [ 0.241483] rcu: Hierarchical SRCU implementation. [ 0.242626] smp: Bringing up secondary CPUs ... [ 0.243222] smp: Brought up 1 node, 1 CPU [ 0.243460] smpboot: Max logical packages: 1 [ 0.244000] smpboot: Total of 1 processors activated (5199.99 BogoMIPS) [ 0.244540] devtmpfs: initialized [ 0.245877] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.246462] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.247489] pinctrl core: initialized pinctrl subsystem [ 0.248578] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.249702] thermal_sys: Registered thermal governor 'step_wise' [ 0.249704] thermal_sys: Registered thermal governor 'user_space' [ 0.250488] cpuidle: using governor menu [ 0.252101] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns [ 0.253474] ACPI: bus type PCI registered [ 0.254086] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.254464] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.255460] PCI: Using MMCONFIG for extended config space [ 0.256460] PCI: Using configuration type 1 for base access [ 0.259081] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.277472] raid6: sse2x2 gen() 14846 MB/s [ 0.294501] raid6: sse2x2 xor() 8553 MB/s [ 0.311468] raid6: sse2x1 gen() 13094 MB/s [ 0.328460] raid6: sse2x1 xor() 7509 MB/s [ 0.345462] raid6: sse1x2 gen() 7684 MB/s [ 0.362469] raid6: sse1x1 gen() 6839 MB/s [ 0.363067] raid6: using algorithm sse2x2 gen() 14846 MB/s [ 0.363460] raid6: .... xor() 8553 MB/s, rmw enabled [ 0.364094] raid6: using ssse3x1 recovery algorithm [ 0.364526] ACPI: Added _OSI(Module Device) [ 0.365461] ACPI: Added _OSI(Processor Device) [ 0.366046] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.366460] ACPI: Added _OSI(Processor Aggregator Device) [ 0.367460] ACPI: Added _OSI(Linux-Dell-Video) [ 0.368034] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.368460] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.370252] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.372176] ACPI: Interpreter enabled [ 0.372473] ACPI: PM: (supports S0 S3 S5) [ 0.372992] ACPI: Using PIC for interrupt routing [ 0.373483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.374535] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.377366] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.377465] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.378515] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.379504] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.380469] acpi resource window ([0x100000000-0x8ffffffff] ignored, not CPU addressable) [ 0.381492] PCI host bridge to bus 0000:00 [ 0.383502] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.384461] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.386468] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.387460] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.388460] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.389474] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.390473] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.392005] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.394461] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.396461] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.401461] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.403461] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.405092] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.407025] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.412822] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.415052] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.418060] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.421498] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.424497] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff] [ 0.427497] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.428570] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.430702] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.432461] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.435004] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff] [ 0.439060] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.442187] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.447121] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.448999] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.451644] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.453335] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.456628] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.458270] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.459461] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff] [ 0.462216] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.463551] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.464727] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.470788] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.472461] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff] [ 0.474179] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.478638] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.480613] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.481492] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.482356] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.482522] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.483526] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.484522] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.485521] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.486522] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.487488] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.488273] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.488467] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.489467] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.490466] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.491236] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.491468] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.492468] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.493614] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.494461] ACPI: Unable to map lapic to logical cpu number [ 0.495518] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 2/0x2 ignored. [ 0.496473] ACPI: Unable to map lapic to logical cpu number [ 0.498274] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 3/0x3 ignored. [ 0.498462] ACPI: Unable to map lapic to logical cpu number [ 0.500483] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.501277] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.501466] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.502461] vgaarb: loaded [ 0.503650] SCSI subsystem initialized [ 0.504305] ACPI: bus type USB registered [ 0.504504] usbcore: registered new interface driver usbfs [ 0.505478] usbcore: registered new interface driver hub [ 0.506160] usbcore: registered new device driver usb [ 0.506485] pps_core: LinuxPPS API ver. 1 registered [ 0.507465] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.508464] PTP clock support registered [ 0.509745] Bluetooth: Core ver 2.22 [ 0.510256] NET: Registered PF_BLUETOOTH protocol family [ 0.510461] Bluetooth: HCI device and connection manager initialized [ 0.511468] Bluetooth: HCI socket layer initialized [ 0.512092] Bluetooth: L2CAP socket layer initialized [ 0.512474] Bluetooth: SCO socket layer initialized [ 0.513515] PCI: Using ACPI for IRQ routing [ 0.568655] clocksource: Switched to clocksource kvm-clock [ 0.698765] pnp: PnP ACPI init [ 0.699469] system 00:07: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.700664] pnp: PnP ACPI: found 8 devices [ 0.744418] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.745691] NET: Registered PF_INET protocol family [ 0.746386] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.751884] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.753015] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.756619] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.757673] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.758591] TCP: Hash tables configured (established 4096 bind 4096) [ 0.759463] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763636] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764640] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.771684] RPC: Registered named UNIX socket transport module. [ 0.772482] RPC: Registered udp transport module. [ 0.773110] RPC: Registered tcp transport module. [ 0.773759] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.774646] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.775452] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.776270] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.777175] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.778092] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.782947] ACPI: \_SB_.LNKA: Enabled at IRQ 10 [ 0.784290] ACPI: \_SB_.LNKB: Enabled at IRQ 10 [ 0.789255] ACPI: \_SB_.LNKC: Enabled at IRQ 11 [ 0.790551] ACPI: \_SB_.LNKD: Enabled at IRQ 11 [ 0.795739] PCI: CLS 0 bytes, default 64 [ 0.796465] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.798246] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.825233] Initialise system trusted keyrings [ 0.825957] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.828234] NFS: Registering the id_resolver key type [ 0.828961] Key type id_resolver registered [ 0.829541] Key type id_legacy registered [ 0.830232] Key type cifs.idmap registered [ 0.846259] xor: automatically using best checksumming function avx [ 0.847248] Key type asymmetric registered [ 0.847815] Asymmetric key parser 'x509' registered [ 0.848490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.849486] io scheduler mq-deadline registered [ 0.850121] io scheduler kyber registered [ 0.850906] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.855636] ACPI: button: Power Button [PWRF] [ 0.856727] ACPI: \_SB_.LNKF: Enabled at IRQ 10 [ 0.859258] ACPI: \_SB_.LNKG: Enabled at IRQ 11 [ 0.861006] ACPI: \_SB_.LNKH: Enabled at IRQ 11 [ 0.862805] ACPI: \_SB_.LNKE: Enabled at IRQ 10 [ 0.864418] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.865480] 00:03: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.866628] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.867750] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.868986] hpet_acpi_add: no address or irqs in _CRS [ 0.870090] Linux agpgart interface v0.103 [ 0.870850] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.871599] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.874659] Console: switching to colour dummy device 80x25 [ 0.875576] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.876804] [drm] number of scanouts: 1 [ 0.877320] [drm] number of cap sets: 0 [ 0.878214] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0 [ 0.883602] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called [ 0.905038] Console: switching to colour frame buffer device 128x48 [ 0.911905] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.914434] brd: module loaded [ 0.916099] loop: module loaded [ 0.917123] virtio_blk virtio3: [vda] 779044 512-byte logical blocks (399 MB/380 MiB) [ 0.919929] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.921050] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.937828] scsi host0: ahci [ 0.938379] scsi host1: ahci [ 0.938912] scsi host2: ahci [ 0.939397] scsi host3: ahci [ 0.939914] scsi host4: ahci [ 0.940390] scsi host5: ahci [ 0.940848] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 10 [ 0.941834] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 10 [ 0.942808] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 10 [ 0.943777] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 10 [ 0.944739] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 10 [ 0.945705] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 10 [ 0.948056] e100: Intel(R) PRO/100 Network Driver [ 0.948737] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.949479] e1000: Intel(R) PRO/1000 Network Driver [ 0.950178] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.950948] e1000e: Intel(R) PRO/1000 Network Driver [ 0.951608] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.952639] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.953341] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.954200] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.955076] ehci-pci: EHCI PCI platform driver [ 0.956222] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.956944] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.958055] ehci-pci 0000:00:1d.7: irq 11, io mem 0xfebd3000 [ 0.965692] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.966603] hub 1-0:1.0: USB hub found [ 0.967121] hub 1-0:1.0: 6 ports detected [ 0.967828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.968647] ohci-pci: OHCI PCI platform driver [ 0.969232] uhci_hcd: USB Universal Host Controller Interface driver [ 0.974704] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.975392] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.976414] uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000c100 [ 0.977316] hub 2-0:1.0: USB hub found [ 0.977851] hub 2-0:1.0: 2 ports detected [ 0.978920] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.979652] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.980767] uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000c120 [ 0.981677] hub 3-0:1.0: USB hub found [ 0.982183] hub 3-0:1.0: 2 ports detected [ 0.983220] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.983950] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.984981] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000c140 [ 0.985980] hub 4-0:1.0: USB hub found [ 0.986501] hub 4-0:1.0: 2 ports detected [ 0.987186] usbcore: registered new interface driver usb-storage [ 0.988034] usbcore: registered new interface driver usbserial_generic [ 0.988973] usbserial: USB Serial support registered for generic [ 0.990011] usbcore: registered new interface driver ftdi_sio [ 0.990783] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.991759] usbcore: registered new interface driver pl2303 [ 0.992486] usbserial: USB Serial support registered for pl2303 [ 0.993300] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.994869] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.995543] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.996246] mousedev: PS/2 mouse device common for all mice [ 0.997265] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.000209] rtc_cmos 00:06: RTC can wake from S4 [ 1.001188] rtc_cmos 00:06: registered as rtc0 [ 1.001855] rtc_cmos 00:06: setting system clock to 2024-04-19T12:45:24 UTC (1713530724) [ 1.002959] rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram [ 1.004153] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.004979] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.005722] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.006839] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 1.007992] intel_pstate: CPU model not supported [ 1.008633] sdhci: Secure Digital Host Controller Interface driver [ 1.009411] sdhci: Copyright(c) Pierre Ossman [ 1.010010] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.010845] usbcore: registered new interface driver usbhid [ 1.011566] usbhid: USB HID core driver [ 1.012093] u32 classifier [ 1.012450] input device check on [ 1.012919] Actions configured [ 1.013479] NET: Registered PF_INET6 protocol family [ 1.014432] Segment Routing with IPv6 [ 1.014955] In-situ OAM (IOAM) with IPv6 [ 1.015549] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.016447] NET: Registered PF_PACKET protocol family [ 1.017148] Bridge firewalling registered [ 1.017718] Key type dns_resolver registered [ 1.018306] NET: Registered PF_VSOCK protocol family [ 1.019204] IPI shorthand broadcast: enabled [ 1.019816] sched_clock: Marking stable (928195927, 91592153)->(1031058410, -11270330) [ 1.020876] Loading compiled-in X.509 certificates [ 1.021562] Key type .fscrypt registered [ 1.022070] Key type fscrypt-provisioning registered [ 1.029516] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.030601] Key type encrypted registered [ 1.031205] printk: console [netcon0] enabled [ 1.031937] netconsole: network logging started [ 1.205673] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.258442] ata1: SATA link down (SStatus 0 SControl 300) [ 1.259320] ata4: SATA link down (SStatus 0 SControl 300) [ 1.260186] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.261169] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.261927] ata3.00: applying bridge limits [ 1.262657] ata5: SATA link down (SStatus 0 SControl 300) [ 1.263481] ata2: SATA link down (SStatus 0 SControl 300) [ 1.264314] ata3.00: configured for UDMA/100 [ 1.265154] ata6: SATA link down (SStatus 0 SControl 300) [ 1.275407] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.290962] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.292152] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.339162] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4 [ 1.340735] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.621149] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 [ 1.635676] IP-Config: Complete: [ 1.636360] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.638268] host=192.168.7.2, domain=, nis-domain=(none) [ 1.639407] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.639411] nameserver0=8.8.8.8 [ 1.642117] md: Waiting for all devices to be available before autodetect [ 1.643500] md: If you don't use raid, use raid=noautodetect [ 1.644630] md: Autodetecting RAID arrays. [ 1.645502] md: autorun ... [ 1.646054] md: ... autorun DONE. [ 1.649329] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 1.651291] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.652736] devtmpfs: mounted [ 1.654550] Freeing unused kernel image (initmem) memory: 876K [ 1.655799] Write protecting kernel text and read-only data: 15404k [ 1.657079] Run /sbin/init as init process INIT: version 3.01 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.983894] udevd[146]: starting version 3.2.10 [ 2.170720] udevd[147]: starting eudev-3.2.10 [ 2.706701] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.8 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86 5.15.150-yocto-standard #1 SMP PREEMPT Mon Mar 11 14:54:28 UTC 2024 i686 Kernel command line: root=/dev/vda rw clocksource=kvm-clock hpet=disable noapic nolapic ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 19 12:45:26 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86EmojiPicker Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-cas4zDCfFR,guid=b8d8b2b1c3d9adf4e9d6a6ec66226767 Using calibration data stored in /etc/pointercal.xinput Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDQtoquRcf64Fh+MwTMviyRa543fOhjrXEjhaOvrBGKxJg8P36b/yUDvDUei9OLMLfZuG7tOZye7VhIUzl/y8KPBNps3I3wSKN10k36Fy+FhmAbobaxQpcYLnPC+fPOnmfRAXK79oXrtrLilfiXH3o6Q91bNDE+DQtL9TcpWL6mTpz7wP9KiXwcM/MdCA7+aK1YfkQlsg5Aqs2qhBtcT86OzgmBhNdFY+mJq7JKIfTIS/lPnwIAVgnqlHupZajpDknqHAQOYKOVqWV57j1pog7TtZ5NFFIVa/WtDAkZb3aRG1f1VajxpKDwb41PZJ2BGtP7LTmmnBUIhQHqLoEtHS+9 root@qemux86 Fingerprint: sha1!! b6:56:fd:49:a4:a3:88:59:be:8e:1e:4a:64:d5:21:fb:8b:3f:8b:31 dropbear. Starting rpcbind daemon...Using calibration data stored in /etc/pointercal.xinput done. matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Starting bluetooth: bluetoothd. [ 4.748478] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.752466] Bluetooth: BNEP filters: protocol multicast [ 4.764641] Bluetooth: BNEP socket layer initialized Starting syslogd/klogd: done libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu libGL error: failed to create dri screen libGL error: failed to load driver: virtio_gpu ...done. Starting Telephony daemon [settings daemon] Forking. run with -n to prevent fork Poky (Yocto Project Reference Distro) 4.0.18 qemux86 /dev/ttyS0 qemux86 login: dbus-daemon[582]: Activating service name='org.a11y.atspi.Registry' requested by ':1.1' (uid=0 pid=589 comm="matchbox-panel --start-applets showdesktop,windows") dbus-daemon[582]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry matchbox-wm: X error warning (0xc00003): BadWindow (invalid Window parameter) (opcode: 12) (connman-applet:551): Gdk-[1;35mCRITICAL[0m **: [34m12:45:28.855[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed