[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241088K/262144K available (10796K kernel code, 1426K rwdata, 2860K rodata, 460K init, 339K bss, 21056K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42870 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000442] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001634] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.012994] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.031197] Console: colour dummy device 80x30 [ 0.035211] Calibrating delay loop... 479.23 BogoMIPS (lpj=2396160) [ 0.087329] CPU: Testing write buffer coherency: ok [ 0.091150] pid_max: default: 32768 minimum: 301 [ 0.094481] LSM: initializing lsm=capability,landlock,integrity [ 0.095951] landlock: Up and running. [ 0.288743] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.288973] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.389545] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.393013] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.403718] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.406012] Setting up static identity map for 0x8400 - 0x8458 [ 0.409300] rcu: Hierarchical SRCU implementation. [ 0.409406] rcu: Max phase no-delay instances is 1000. [ 0.440385] devtmpfs: initialized [ 0.481189] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.485143] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.485538] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.515417] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.526421] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.576808] platform bridge: Fixed dependency cycle(s) with /vga [ 0.580331] platform vga: Fixed dependency cycle(s) with /bridge [ 0.625612] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.626618] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.627325] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.643730] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.644671] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.661469] Serial: AMBA PL011 UART driver [ 0.684091] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.687368] printk: console [ttyAMA0] enabled [ 0.965660] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.986626] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 1.004874] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 1.026996] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 1.055356] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.497010] raid6: int32x8 gen() 29 MB/s [ 1.868413] raid6: int32x4 gen() 57 MB/s [ 2.207911] raid6: int32x2 gen() 62 MB/s [ 2.547968] raid6: int32x1 gen() 245 MB/s [ 2.553685] raid6: using algorithm int32x1 gen() 245 MB/s [ 2.908332] raid6: .... xor() 117 MB/s, rmw enabled [ 2.909553] raid6: using intx1 recovery algorithm [ 2.932495] SCSI subsystem initialized [ 2.951777] usbcore: registered new interface driver usbfs [ 2.968981] usbcore: registered new interface driver hub [ 2.976768] usbcore: registered new device driver usb [ 3.030047] pps_core: LinuxPPS API ver. 1 registered [ 3.036734] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.068653] PTP clock support registered [ 3.091952] Advanced Linux Sound Architecture Driver Initialized. [ 3.163003] vgaarb: loaded [ 3.186919] clocksource: Switched to clocksource arm,sp804 [ 3.943431] NET: Registered PF_INET protocol family [ 3.948965] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.969682] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.971443] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.972519] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.973736] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.974814] TCP: Hash tables configured (established 2048 bind 2048) [ 3.979140] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.980421] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.987553] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.999189] RPC: Registered named UNIX socket transport module. [ 4.001628] RPC: Registered udp transport module. [ 4.002956] RPC: Registered tcp transport module. [ 4.003638] RPC: Registered tcp-with-tls transport module. [ 4.007410] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.008497] PCI: CLS 0 bytes, default 32 [ 4.017670] NetWinder Floating Point Emulator V0.97 (double precision) [ 4.038180] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 4.058643] NFS: Registering the id_resolver key type [ 4.068148] Key type id_resolver registered [ 4.069310] Key type id_legacy registered [ 4.079163] Key type cifs.idmap registered [ 4.618843] xor: measuring software checksum speed [ 4.652287] arm4regs : 474 MB/sec [ 4.678313] 8regs : 531 MB/sec [ 4.703728] 32regs : 536 MB/sec [ 4.709894] xor: using function: 32regs (536 MB/sec) [ 4.718525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.728824] io scheduler mq-deadline registered [ 4.734766] io scheduler kyber registered [ 4.737228] io scheduler bfq registered [ 4.767733] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 4.780182] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 4.791975] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 4.798045] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 4.804648] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 4.808013] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 4.810634] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 4.811913] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 4.817880] versatile-pci 10001000.pci: PCI core found (slot 11) [ 4.823275] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 4.825290] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.827529] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.828545] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 4.829505] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 4.835487] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 4.842667] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 4.850940] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 4.857192] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.868632] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.871335] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.872323] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.873880] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.881948] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.882995] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.883752] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.887347] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.889194] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.895915] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.897796] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.903908] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.904754] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.905131] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.910124] PCI: bus0: Fast back to back transfers disabled [ 4.914931] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.919068] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.920649] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.926271] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.929450] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.931183] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.932247] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.933170] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.934080] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.934968] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.935780] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.937251] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.942157] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.949823] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.956111] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.964538] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.973153] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.979081] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.984236] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.992598] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.039219] random: crng init done [ 5.049540] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 5.052012] [drm] features: -virgl +edid -resource_blob -host_visible [ 5.052158] [drm] features: -context_init [ 5.058021] [drm] number of scanouts: 1 [ 5.058741] [drm] number of cap sets: 0 [ 5.099664] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 5.392628] Console: switching to colour frame buffer device 160x50 [ 5.482169] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 5.514201] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 5.532239] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.671690] brd: module loaded [ 5.677350] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 5.694082] virtio_blk virtio3: [vda] 959736 512-byte logical blocks (491 MB/469 MiB) [ 5.752918] physmap-flash 34000000.flash: versatile/realview flash protection [ 5.782601] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 5.799936] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 5.814503] Intel/Sharp Extended Query Table at 0x0031 [ 5.817256] Using buffer write method [ 5.922517] smc91x: not found (-19). [ 5.930211] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 5.957296] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 6.030610] rtc-ds1307 0-0068: registered as rtc0 [ 6.043089] rtc-ds1307 0-0068: setting system clock to 2024-04-20T20:45:13 UTC (1713645913) [ 6.062072] rtc-pl031 101e8000.rtc: registered as rtc1 [ 6.065740] i2c_dev: i2c /dev entries driver [ 6.070406] versatile reboot driver registered [ 6.082935] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 6.117190] leds-syscon 10000008.0.led: registered LED (null) [ 6.128874] mmci-pl18x fpga:0b: mmc0: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 6.142546] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 6.149295] mmci-pl18x fpga:05: mmc1: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 6.159713] leds-syscon 10000008.1.led: registered LED (null) [ 6.162586] leds-syscon 10000008.2.led: registered LED (null) [ 6.165065] leds-syscon 10000008.3.led: registered LED (null) [ 6.181701] leds-syscon 10000008.4.led: registered LED (null) [ 6.184196] leds-syscon 10000008.5.led: registered LED (null) [ 6.221703] leds-syscon 10000008.6.led: registered LED (null) [ 6.238072] leds-syscon 10000008.7.led: registered LED (null) [ 6.254944] ledtrig-cpu: registered to indicate activity on CPUs [ 6.270945] usbcore: registered new interface driver usbhid [ 6.280520] usbhid: USB HID core driver [ 6.344075] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.354314] aaci-pl041 10004000.aaci: FIFO 512 entries [ 6.364759] u32 classifier [ 6.370860] input device check on [ 6.375766] Actions configured [ 6.388161] NET: Registered PF_INET6 protocol family [ 6.434602] Segment Routing with IPv6 [ 6.446712] In-situ OAM (IOAM) with IPv6 [ 6.454287] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.466269] NET: Registered PF_PACKET protocol family [ 6.477479] Bridge firewalling registered [ 6.485717] Key type dns_resolver registered [ 6.494574] NET: Registered PF_VSOCK protocol family [ 6.661642] registered taskstats version 1 [ 6.775091] Key type .fscrypt registered [ 6.781180] Key type fscrypt-provisioning registered [ 6.812803] Btrfs loaded, zoned=no, fsverity=no [ 6.858448] Key type encrypted registered [ 6.874411] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 6.892319] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.911283] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.914042] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.921684] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.925225] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.930243] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.937816] printk: console [netcon0] enabled [ 6.938900] netconsole: network logging started [ 7.040557] IP-Config: Complete: [ 7.041660] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 7.043659] host=192.168.7.8, domain=, nis-domain=(none) [ 7.045031] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 7.045198] nameserver0=8.8.8.8 [ 7.072581] clk: Disabling unused clocks [ 7.074639] ALSA device list: [ 7.075231] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 7.094381] md: Waiting for all devices to be available before autodetect [ 7.099450] md: If you don't use raid, use raid=noautodetect [ 7.104954] md: Autodetecting RAID arrays. [ 7.105664] md: autorun ... [ 7.106175] md: ... autorun DONE. [ 7.395840] EXT4-fs (vda): mounted filesystem 4db985d2-7795-4381-8764-b1bbdcd054dd r/w with ordered data mode. Quota mode: disabled. [ 7.406439] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 7.420858] devtmpfs: mounted [ 7.518011] Freeing unused kernel image (initmem) memory: 460K [ 7.518949] Kernel memory protection not selected by kernel config. [ 7.519994] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 17.783495] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 17.799134] clcd-pl11x: probe of 10120000.display failed with error -2 [ 17.819640] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 17.851176] amba 10120000.display: deferred probe pending [ 17.873212] amba 10100000.smc: deferred probe pending [ 17.897582] amba 10110000.mpmc: deferred probe pending [ 17.906271] amba 101e0000.sctl: deferred probe pending [ 17.937517] amba 101e1000.watchdog: deferred probe pending [ 17.945006] amba 101f0000.sci: deferred probe pending [ 17.977593] amba 101f4000.spi: deferred probe pending [ 17.984016] amba 1000a000.sci: deferred probe pending [ 18.170476] udevd[97]: starting version 3.2.14 [ 18.914884] udevd[98]: starting eudev-3.2.14 [ 53.240487] EXT4-fs (vda): re-mounted 4db985d2-7795-4381-8764-b1bbdcd054dd r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.23-yocto-standard #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 20 20:46:34 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-c2654bb046093ecffd171d25cc10cedeb6d8b120 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-6wAAXAfaC7,guid=71fd53241164503fbb6f0651662429d9 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[535]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=516 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[535]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry