[    0.000000] Linux version 5.15.150-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Mar 11 14:54:45 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720416K/786428K available (12696K kernel code, 1903K rwdata, 2872K rodata, 428K init, 348K bss, 66012K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.37 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466393289 ns
[    0.000127] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12883588093ns
[    0.008514] Console: colour dummy device 80x25
[    0.011892] printk: console [tty0] enabled
[    0.012625] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.15.150-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Mar 11 14:54:45 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720416K/786428K available (12696K kernel code, 1903K rwdata, 2872K rodata, 428K init, 348K bss, 66012K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.37 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466393289 ns
[    0.000127] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12883588093ns
[    0.008514] Console: colour dummy device 80x25
[    0.011892] printk: console [tty0] enabled
[    0.012625] printk: bootconsole [uart8250] disabled
[    0.014565] Calibrating delay loop... 933.06 BogoMIPS (lpj=4665344)
[    0.051769] pid_max: default: 32768 minimum: 301
[    0.052770] LSM: Security Framework initializing
[    0.053997] landlock: Up and running.
[    0.056471] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.056640] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.097914] Performance counters: Either hardware does not support performance counters, or not yet implemented.
[    0.099177] rcu: Hierarchical SRCU implementation.
[    0.105544] smp: Bringing up secondary CPUs ...
[    0.105698] smp: Brought up 1 node, 1 CPU
[    0.119195] devtmpfs: initialized
[    0.131512] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.131752] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.142223] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.403838] raid6: int64x8  gen()   437 MB/s
[    0.575515] raid6: int64x8  xor()   307 MB/s
[    0.754547] raid6: int64x4  gen()   642 MB/s
[    0.930545] raid6: int64x4  xor()   582 MB/s
[    1.102616] raid6: int64x2  gen()  1230 MB/s
[    1.282062] raid6: int64x2  xor()   704 MB/s
[    1.460890] raid6: int64x1  gen()   962 MB/s
[    1.632942] raid6: int64x1  xor()   549 MB/s
[    1.633286] raid6: using algorithm int64x2 gen() 1230 MB/s
[    1.633497] raid6: .... xor() 704 MB/s, rmw enabled
[    1.633692] raid6: using intx1 recovery algorithm
[    1.641256] vgaarb: loaded
[    1.643188] SCSI subsystem initialized
[    1.643970] usbcore: registered new interface driver usbfs
[    1.644421] usbcore: registered new interface driver hub
[    1.644708] usbcore: registered new device driver usb
[    1.645274] pps_core: LinuxPPS API ver. 1 registered
[    1.645352] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.645557] PTP clock support registered
[    1.660778] PCI host bridge to bus 0000:00
[    1.661208] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.661940] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.662197] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.672144] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.673137] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.673270] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.673371] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.673465] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.673578] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.676579] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.677454] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.677813] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.678000] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.678108] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.678243] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.678339] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.678867] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.679005] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.679826] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.680431] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.680632] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.681372] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.681484] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.681670] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.681771] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.682324] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.682812] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.682944] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.683144] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.683339] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.683772] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.683893] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.684003] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.684479] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.684599] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.684707] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.685543] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.687398] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.687816] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.687988] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.688244] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.688443] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.688570] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.688715] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.688856] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.688980] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.689064] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.689163] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.689248] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.692991] clocksource: Switched to clocksource MIPS
[    1.855131] NET: Registered PF_INET protocol family
[    1.857442] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.877742] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    1.877944] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.878103] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.878484] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.878833] TCP: Hash tables configured (established 8192 bind 8192)
[    1.880355] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.880737] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.892989] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.896457] RPC: Registered named UNIX socket transport module.
[    1.896594] RPC: Registered udp transport module.
[    1.896665] RPC: Registered tcp transport module.
[    1.896726] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.898116] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.899174] PCI: CLS 0 bytes, default 32
[    2.383954] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    2.399821] NFS: Registering the id_resolver key type
[    2.401238] Key type id_resolver registered
[    2.401333] Key type id_legacy registered
[    2.406503] Key type cifs.idmap registered
[    2.466806] xor: measuring software checksum speed
[    2.473636]    8regs           :  1586 MB/sec
[    2.480240]    8regs_prefetch  :  1536 MB/sec
[    2.486682]    32regs          :  1617 MB/sec
[    2.493647]    32regs_prefetch :  1489 MB/sec
[    2.493758] xor: using function: 32regs (1617 MB/sec)
[    2.494303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.494532] io scheduler mq-deadline registered
[    2.494665] io scheduler kyber registered
[    2.499885] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    2.503682] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    2.504763] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    2.506934] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.513105] printk: console [ttyS0] disabled
[    2.536732] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.536909] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    2.565148] printk: console [ttyS0] enabled
[    2.587030] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.587349] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    2.587802] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.597435] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.598485] [drm] Found bochs VGA, ID 0xb0c5.
[    2.598731] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.602414] [drm] Found EDID data blob.
[    2.603487] random: crng init done
[    2.609429] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.690031] Console: switching to colour frame buffer device 128x48
[    2.711919] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.749162] brd: module loaded
[    2.758386] virtio_blk virtio2: [vda] 4730444 512-byte logical blocks (2.42 GB/2.25 GiB)
[    2.780815] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.781487] ehci-pci: EHCI PCI platform driver
[    2.782137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.782773] ohci-pci: OHCI PCI platform driver
[    2.790336] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.791609] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.796454] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    2.800134] usbcore: registered new interface driver usbhid
[    2.800594] usbhid: USB HID core driver
[    2.801509] u32 classifier
[    2.801793]     input device check on
[    2.802118]     Actions configured
[    2.804507] NET: Registered PF_INET6 protocol family
[    2.813526] Segment Routing with IPv6
[    2.814093] In-situ OAM (IOAM) with IPv6
[    2.815245] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.818670] NET: Registered PF_PACKET protocol family
[    2.819962] Bridge firewalling registered
[    2.824745] Key type dns_resolver registered
[    2.825754] NET: Registered PF_VSOCK protocol family
[    2.834353] Key type .fscrypt registered
[    2.838252] Key type fscrypt-provisioning registered
[    2.852017] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    2.883007] Key type encrypted registered
[    2.896740] printk: console [netcon0] enabled
[    2.900972] netconsole: network logging started
[    2.908887] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.546450] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.643767] IP-Config: Complete:
[    3.659163]      device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9
[    3.675483]      host=192.168.7.10, domain=, nis-domain=(none)
[    3.696306]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.696491]      nameserver0=8.8.8.8
[    3.757011] md: Waiting for all devices to be available before autodetect
[    3.769777] md: If you don't use raid, use raid=noautodetect
[    3.781609] md: Autodetecting RAID arrays.
[    3.799482] md: autorun ...
[    3.810110] md: ... autorun DONE.
[    3.829656] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    3.898995] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    3.907660] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.919133] devtmpfs: mounted
[    3.969118] Freeing unused kernel image (initmem) memory: 428K
[    3.977086] This architecture does not have kernel memory protection.
[    3.982984] Run /sbin/init as init process
[    4.046503] process '/sbin/init.sysvinit' started with executable stack
[    6.885799] udevd[118]: starting version 3.2.10
[    7.013772] udevd[119]: starting eudev-3.2.10
[   21.265600] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error

Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...done.


X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips64 5.15.150-yocto-standard #1 SMP PREEMPT Mon Mar 11 14:54:45 UTC 2024 mips64
Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 21 14:30:33 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
[A[122G[ ok ]
D-BUS per-session daemon address is: unix:path=/tmp/dbus-0rntpRP9gI,guid=28c3c79d31a84b789a8bd19d6625230f
Starting Telephony daemon
Using calibration data stored in /etc/pointercal.xinput
No makedumpfile found.
Starting crond: OK
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 4.0.18 qemumips64 ttyS0

qemumips64 login: [ 1796.598042] hellomod: loading out-of-tree module taints kernel.
[ 1796.619397] Hello world!
[ 1800.643225] Cleaning up hellomod.
