[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241088K/262144K available (10796K kernel code, 1426K rwdata, 2860K rodata, 460K init, 339K bss, 21056K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42870 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000369] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001365] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.011397] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.027145] Console: colour dummy device 80x30 [ 0.032805] Calibrating delay loop... 484.14 BogoMIPS (lpj=2420736) [ 0.135420] CPU: Testing write buffer coherency: ok [ 0.146167] pid_max: default: 32768 minimum: 301 [ 0.150016] LSM: initializing lsm=capability,landlock,integrity [ 0.151357] landlock: Up and running. [ 0.156531] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.156705] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.245262] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.252699] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.253862] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.255970] Setting up static identity map for 0x8400 - 0x8458 [ 0.259569] rcu: Hierarchical SRCU implementation. [ 0.259712] rcu: Max phase no-delay instances is 1000. [ 0.290427] devtmpfs: initialized [ 0.324333] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.328218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.328586] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.350209] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.359265] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.396514] platform bridge: Fixed dependency cycle(s) with /vga [ 0.399258] platform vga: Fixed dependency cycle(s) with /bridge [ 0.435849] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.436678] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.437338] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.451474] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.452248] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.467514] Serial: AMBA PL011 UART driver [ 0.497667] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.501472] printk: console [ttyAMA0] enabled [ 0.558990] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.565562] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.571801] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.575494] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.588191] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.958325] raid6: int32x8 gen() 39 MB/s [ 1.298213] raid6: int32x4 gen() 72 MB/s [ 1.638225] raid6: int32x2 gen() 90 MB/s [ 1.978223] raid6: int32x1 gen() 260 MB/s [ 1.983383] raid6: using algorithm int32x1 gen() 260 MB/s [ 2.348067] raid6: .... xor() 139 MB/s, rmw enabled [ 2.348786] raid6: using intx1 recovery algorithm [ 2.357063] SCSI subsystem initialized [ 2.370686] usbcore: registered new interface driver usbfs [ 2.371710] usbcore: registered new interface driver hub [ 2.372557] usbcore: registered new device driver usb [ 2.388715] pps_core: LinuxPPS API ver. 1 registered [ 2.389265] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.390075] PTP clock support registered [ 2.394456] Advanced Linux Sound Architecture Driver Initialized. [ 2.450903] vgaarb: loaded [ 2.456535] clocksource: Switched to clocksource arm,sp804 [ 2.889623] NET: Registered PF_INET protocol family [ 2.891917] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.903133] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.903940] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.904537] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.905152] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.905782] TCP: Hash tables configured (established 2048 bind 2048) [ 2.907994] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.908742] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.912566] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.920216] RPC: Registered named UNIX socket transport module. [ 2.920828] RPC: Registered udp transport module. [ 2.921166] RPC: Registered tcp transport module. [ 2.921484] RPC: Registered tcp-with-tls transport module. [ 2.921851] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.922447] PCI: CLS 0 bytes, default 32 [ 2.927318] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.938042] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.944761] NFS: Registering the id_resolver key type [ 2.947323] Key type id_resolver registered [ 2.947734] Key type id_legacy registered [ 2.953737] Key type cifs.idmap registered [ 3.207217] xor: measuring software checksum speed [ 3.220856] arm4regs : 905 MB/sec [ 3.230623] 8regs : 1179 MB/sec [ 3.240265] 32regs : 1171 MB/sec [ 3.240842] xor: using function: 8regs (1179 MB/sec) [ 3.242105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.242780] io scheduler mq-deadline registered [ 3.243217] io scheduler kyber registered [ 3.243994] io scheduler bfq registered [ 3.258786] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 3.261249] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 3.263770] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 3.265862] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 3.268204] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 3.269619] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 3.270963] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 3.271661] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 3.273814] versatile-pci 10001000.pci: PCI core found (slot 11) [ 3.276815] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 3.277660] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.278437] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.278925] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 3.279469] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 3.282509] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 3.283991] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 3.284549] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 3.285030] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 3.290302] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 3.290918] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 3.291436] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.292006] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 3.293422] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 3.293897] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 3.294329] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.295654] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 3.296123] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.297853] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 3.298446] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.299861] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 3.300349] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 3.300790] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.303161] PCI: bus0: Fast back to back transfers disabled [ 3.305117] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 3.305884] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 3.307246] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 3.307891] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 3.308427] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 3.308967] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 3.309508] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 3.309996] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 3.310497] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.310956] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 3.311411] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 3.311836] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 3.314251] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 3.319087] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.320843] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.324882] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 3.329126] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 3.331236] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 3.334202] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 3.338794] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.361905] random: crng init done [ 3.365909] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 3.367539] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.367613] [drm] features: -context_init [ 3.368897] [drm] number of scanouts: 1 [ 3.369235] [drm] number of cap sets: 0 [ 3.387005] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 3.576995] Console: switching to colour frame buffer device 160x50 [ 3.628140] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.659253] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.664143] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.755706] brd: module loaded [ 3.757122] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.765120] virtio_blk virtio3: [vda] 962888 512-byte logical blocks (493 MB/470 MiB) [ 3.785695] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.799851] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.802843] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.804187] Intel/Sharp Extended Query Table at 0x0031 [ 3.805262] Using buffer write method [ 3.845212] smc91x: not found (-19). [ 3.846862] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.847552] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.885743] rtc-ds1307 0-0068: registered as rtc0 [ 3.893447] rtc-ds1307 0-0068: setting system clock to 2024-04-22T10:16:46 UTC (1713781006) [ 3.901068] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.902369] i2c_dev: i2c /dev entries driver [ 3.903877] versatile reboot driver registered [ 3.908270] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.918396] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.923199] leds-syscon 10000008.0.led: registered LED (null) [ 3.924462] leds-syscon 10000008.1.led: registered LED (null) [ 3.925416] leds-syscon 10000008.2.led: registered LED (null) [ 3.926957] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.928852] leds-syscon 10000008.3.led: registered LED (null) [ 3.929897] leds-syscon 10000008.4.led: registered LED (null) [ 3.930797] leds-syscon 10000008.5.led: registered LED (null) [ 3.931712] leds-syscon 10000008.6.led: registered LED (null) [ 3.932640] leds-syscon 10000008.7.led: registered LED (null) [ 3.934425] ledtrig-cpu: registered to indicate activity on CPUs [ 3.939486] usbcore: registered new interface driver usbhid [ 3.939912] usbhid: USB HID core driver [ 3.969845] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.977822] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.978470] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.980158] u32 classifier [ 3.980392] input device check on [ 3.980648] Actions configured [ 3.983891] NET: Registered PF_INET6 protocol family [ 4.004050] Segment Routing with IPv6 [ 4.004717] In-situ OAM (IOAM) with IPv6 [ 4.005987] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.011537] NET: Registered PF_PACKET protocol family [ 4.012678] Bridge firewalling registered [ 4.016786] Key type dns_resolver registered [ 4.018153] NET: Registered PF_VSOCK protocol family [ 4.068538] registered taskstats version 1 [ 4.127048] Key type .fscrypt registered [ 4.127491] Key type fscrypt-provisioning registered [ 4.138942] Btrfs loaded, zoned=no, fsverity=no [ 4.149941] Key type encrypted registered [ 4.155407] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.156086] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.158372] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.161091] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.161719] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.163015] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.165139] printk: console [netcon0] enabled [ 4.165702] netconsole: network logging started [ 4.624900] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.631328] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.632456] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.638322] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.730424] IP-Config: Complete: [ 4.731130] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 4.732713] host=192.168.7.8, domain=, nis-domain=(none) [ 4.733462] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.733601] nameserver0=8.8.8.8 [ 4.752669] clk: Disabling unused clocks [ 4.754053] ALSA device list: [ 4.754632] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.772328] md: Waiting for all devices to be available before autodetect [ 4.773424] md: If you don't use raid, use raid=noautodetect [ 4.774252] md: Autodetecting RAID arrays. [ 4.774883] md: autorun ... [ 4.775393] md: ... autorun DONE. [ 4.904747] EXT4-fs (vda): mounted filesystem 205b6547-a1ec-410e-a57d-b8d8f4a443fb r/w with ordered data mode. Quota mode: disabled. [ 4.906260] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.911745] devtmpfs: mounted [ 4.969196] Freeing unused kernel image (initmem) memory: 460K [ 4.969839] Kernel memory protection not selected by kernel config. [ 4.970751] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 8.920547] udevd[97]: starting version 3.2.14 [ 9.128650] udevd[98]: starting eudev-3.2.14 [ 15.209301] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 15.209970] clcd-pl11x: probe of 10120000.display failed with error -2 [ 15.211433] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 15.213136] amba 10100000.smc: deferred probe pending [ 15.213583] amba 10110000.mpmc: deferred probe pending [ 15.213986] amba 101e0000.sctl: deferred probe pending [ 15.214370] amba 101e1000.watchdog: deferred probe pending [ 15.214768] amba 101f0000.sci: deferred probe pending [ 15.215142] amba 101f4000.spi: deferred probe pending [ 15.215521] amba 1000a000.sci: deferred probe pending [ 15.215904] amba 10120000.display: deferred probe pending [ 29.848506] EXT4-fs (vda): re-mounted 205b6547-a1ec-410e-a57d-b8d8f4a443fb r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.23-yocto-standard #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 22 10:17:26 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-f57fbfcfc2c494a7fc5e2fe8cbd90e926fad40b0 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-txf69OxTu2,guid=2eb91494e70208ac577b759566263953 Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[533]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=517 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[533]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry