[    0.000000] Linux version 5.15.150-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Mar 11 14:54:45 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720416K/786428K available (12696K kernel code, 1903K rwdata, 2872K rodata, 428K init, 348K bss, 66012K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.35 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467003157 ns
[    0.000185] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884273149ns
[    0.016864] Console: colour dummy device 80x25
[    0.017571] printk: console [tty0] enabled
[    0.018446] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 5.15.150-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Mon Mar 11 14:54:45 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU)
[    0.000000] FPU revision is: 007f0000
[    0.000000] OF: fdt: No chosen node found, continuing without
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000]   node   0: [mem 0x0000000090000000-0x00000000afffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff]
[    0.000000] On node 0, zone DMA32: 524288 pages in unavailable ranges
[    0.000000] percpu: Embedded 25 pages/cpu s64288 r8192 d29920 u102400
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 185343
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 720416K/786428K available (12696K kernel code, 1903K rwdata, 2872K rodata, 428K init, 348K bss, 66012K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] CPU frequency 333.35 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467003157 ns
[    0.000185] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884273149ns
[    0.016864] Console: colour dummy device 80x25
[    0.017571] printk: console [tty0] enabled
[    0.018446] printk: bootconsole [uart8250] disabled
[    0.020918] Calibrating delay loop... 961.74 BogoMIPS (lpj=4808704)
[    0.054343] pid_max: default: 32768 minimum: 301
[    0.055824] LSM: Security Framework initializing
[    0.057700] landlock: Up and running.
[    0.061470] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.061773] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.123430] Performance counters: Either hardware does not support performance counters, or not yet implemented.
[    0.125540] rcu: Hierarchical SRCU implementation.
[    0.135525] smp: Bringing up secondary CPUs ...
[    0.135816] smp: Brought up 1 node, 1 CPU
[    0.157222] devtmpfs: initialized
[    0.185540] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.185994] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.206004] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.716787] raid6: int64x8  gen()   272 MB/s
[    0.889034] raid6: int64x8  xor()   189 MB/s
[    1.070117] raid6: int64x4  gen()   375 MB/s
[    1.248712] raid6: int64x4  xor()   345 MB/s
[    1.423266] raid6: int64x2  gen()   898 MB/s
[    1.619320] raid6: int64x2  xor()   493 MB/s
[    1.795706] raid6: int64x1  gen()   623 MB/s
[    1.969703] raid6: int64x1  xor()   353 MB/s
[    1.970052] raid6: using algorithm int64x2 gen() 898 MB/s
[    1.970195] raid6: .... xor() 493 MB/s, rmw enabled
[    1.970441] raid6: using intx1 recovery algorithm
[    1.982026] vgaarb: loaded
[    1.985247] SCSI subsystem initialized
[    1.986582] usbcore: registered new interface driver usbfs
[    1.987342] usbcore: registered new interface driver hub
[    1.987821] usbcore: registered new device driver usb
[    1.988690] pps_core: LinuxPPS API ver. 1 registered
[    1.988804] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.989106] PTP clock support registered
[    2.015571] PCI host bridge to bus 0000:00
[    2.016267] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    2.017267] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    2.017580] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.020756] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    2.022410] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    2.022676] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    2.023097] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    2.023263] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    2.023449] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    2.028272] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    2.030005] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    2.030663] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    2.030973] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.031121] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.031307] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.031450] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.032605] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    2.032835] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    2.035388] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    2.036393] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    2.036723] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    2.038020] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    2.038218] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    2.038489] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    2.038634] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.039548] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    2.040341] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    2.040579] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    2.040869] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.041121] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    2.042051] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    2.042251] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    2.042409] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.043304] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    2.043506] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    2.043981] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.045476] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.048193] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    2.048940] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    2.049264] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    2.049565] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    2.049747] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    2.049850] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    2.049969] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    2.050081] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    2.050186] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    2.050300] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    2.050417] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    2.050540] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    2.055455] clocksource: Switched to clocksource MIPS
[    2.633541] NET: Registered PF_INET protocol family
[    2.675087] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.703061] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    2.703445] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.703680] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.704217] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.715046] TCP: Hash tables configured (established 8192 bind 8192)
[    2.717462] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.718067] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.721492] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.739310] RPC: Registered named UNIX socket transport module.
[    2.739587] RPC: Registered udp transport module.
[    2.739683] RPC: Registered tcp transport module.
[    2.739769] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.741797] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.743266] PCI: CLS 0 bytes, default 32
[    3.538229] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    3.567461] NFS: Registering the id_resolver key type
[    3.569841] Key type id_resolver registered
[    3.570013] Key type id_legacy registered
[    3.579348] Key type cifs.idmap registered
[    3.669609] xor: measuring software checksum speed
[    3.681899]    8regs           :   909 MB/sec
[    3.693848]    8regs_prefetch  :   881 MB/sec
[    3.705976]    32regs          :   887 MB/sec
[    3.718229]    32regs_prefetch :   850 MB/sec
[    3.718497] xor: using function: 8regs (909 MB/sec)
[    3.719326] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.719713] io scheduler mq-deadline registered
[    3.719928] io scheduler kyber registered
[    3.729250] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    3.734304] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    3.736515] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    3.740038] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    3.750531] printk: console [ttyS0] disabled
[    3.780279] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.781381] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    3.835494] printk: console [ttyS0] enabled
[    3.861640] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.862188] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    3.863237] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    3.894025] random: crng init done
[    3.896343] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    3.898030] [drm] Found bochs VGA, ID 0xb0c5.
[    3.898410] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    3.904514] [drm] Found EDID data blob.
[    3.915618] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    4.123235] Console: switching to colour frame buffer device 128x48
[    4.143916] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    4.196906] brd: module loaded
[    4.207154] virtio_blk virtio2: [vda] 4730464 512-byte logical blocks (2.42 GB/2.25 GiB)
[    4.243911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.248352] ehci-pci: EHCI PCI platform driver
[    4.249388] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.250111] ohci-pci: OHCI PCI platform driver
[    4.257261] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.259407] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.267719] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    4.273585] usbcore: registered new interface driver usbhid
[    4.274561] usbhid: USB HID core driver
[    4.276334] u32 classifier
[    4.276769]     input device check on
[    4.280822]     Actions configured
[    4.284588] NET: Registered PF_INET6 protocol family
[    4.352753] Segment Routing with IPv6
[    4.353926] In-situ OAM (IOAM) with IPv6
[    4.361593] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.368559] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    4.375221] NET: Registered PF_PACKET protocol family
[    4.376903] Bridge firewalling registered
[    4.378450] Key type dns_resolver registered
[    4.402106] NET: Registered PF_VSOCK protocol family
[    4.438334] Key type .fscrypt registered
[    4.443103] Key type fscrypt-provisioning registered
[    4.474125] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    4.509958] Key type encrypted registered
[    4.522300] printk: console [netcon0] enabled
[    4.533984] netconsole: network logging started
[    5.078146] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    5.176026] IP-Config: Complete:
[    5.191044]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    5.210611]      host=192.168.7.6, domain=, nis-domain=(none)
[    5.224909]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    5.225112]      nameserver0=8.8.8.8
[    5.257835] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.295791] md: Waiting for all devices to be available before autodetect
[    5.312251] md: If you don't use raid, use raid=noautodetect
[    5.329675] md: Autodetecting RAID arrays.
[    5.341952] md: autorun ...
[    5.349853] md: ... autorun DONE.
[    5.422701] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    5.431521] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    5.449928] devtmpfs: mounted
[    5.505894] Freeing unused kernel image (initmem) memory: 428K
[    5.515210] This architecture does not have kernel memory protection.
[    5.523888] Run /sbin/init as init process
[    5.581043] process '/sbin/init.sysvinit' started with executable stack
[   11.100737] udevd[118]: starting version 3.2.10
[   11.365842] udevd[119]: starting eudev-3.2.10
[   29.900143] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error

Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips64 5.15.150-yocto-standard #1 SMP PREEMPT Mon Mar 11 14:54:45 UTC 2024 mips64
Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 23 16:13:32 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
hwclock: Cannot access the Hardware Clock via any known method.
hwclock: Use the --verbose option to see the details of our search for an access method.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
D-BUS per-session daemon address is: unix:path=/tmp/dbus-fPhdN6kdPS,guid=2957d4646b4fd08b820981196627de34
[A[122G[ ok ]
Starting Telephony daemon
Using calibration data stored in /etc/pointercal.xinput
No makedumpfile found.
Starting crond: OK
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 4.0.18 qemumips64 ttyS0

qemumips64 login: [ 2700.693486] hellomod: loading out-of-tree module taints kernel.
[ 2700.704998] Hello world!
[ 2704.899881] Cleaning up hellomod.
