[ 3.558282] xor: measuring software checksum speed [ 3.578400] arm4regs : 547 MB/sec [ 3.595969] 8regs : 628 MB/sec [ 3.613919] 32regs : 581 MB/sec [ 3.629110] neon : 849 MB/sec [ 3.629978] xor: using function: neon (849 MB/sec) [ 3.630675] async_tx: api initialized (async) [ 3.632525] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.633924] io scheduler mq-deadline registered [ 3.634386] io scheduler kyber registered [ 3.642887] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 3.644970] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 3.646521] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 3.649119] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 3.652076] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 3.652755] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.653197] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.653944] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 3.657494] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 3.666910] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 3.668408] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 3.669270] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.670149] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.673013] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 3.674747] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.677768] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 3.678228] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.678603] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.683303] PCI: bus0: Fast back to back transfers disabled [ 3.809866] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 3.815660] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 3.817552] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 3.818655] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 3.819556] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 3.820388] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 3.824039] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 3.850067] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 3.855684] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 4.220913] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 4.223105] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.223215] [drm] features: -context_init [ 4.227887] [drm] number of scanouts: 1 [ 4.228288] [drm] number of cap sets: 0 [ 4.275428] printk: console [hvc0] enabled [ 4.278100] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 4.681476] Console: switching to colour frame buffer device 160x50 [ 4.716892] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.874594] brd: module loaded [ 4.876549] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 4.885676] virtio_blk virtio1: [vda] 883972 512-byte logical blocks (453 MB/432 MiB) [ 4.938331] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 4.939977] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 4.950887] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 4.964110] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 4.965756] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.968031] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 4.985288] hub 1-0:1.0: USB hub found [ 4.987574] hub 1-0:1.0: 4 ports detected [ 4.995749] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.000576] hub 2-0:1.0: USB hub found [ 5.002250] hub 2-0:1.0: 4 ports detected [ 5.016980] rtc-pl031 9010000.pl031: registered as rtc0 [ 5.019558] rtc-pl031 9010000.pl031: setting system clock to 2024-05-01T05:48:45 UTC (1714542525) [ 5.101611] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.111573] usbcore: registered new interface driver usbhid [ 5.113094] usbhid: USB HID core driver [ 5.116373] u32 classifier [ 5.117298] input device check on [ 5.118160] Actions configured [ 5.125349] NET: Registered PF_INET6 protocol family [ 5.149160] Segment Routing with IPv6 [ 5.150929] In-situ OAM (IOAM) with IPv6 [ 5.154294] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.290209] NET: Registered PF_PACKET protocol family [ 5.294149] Bridge firewalling registered [ 5.297668] Key type dns_resolver registered [ 5.300757] NET: Registered PF_VSOCK protocol family [ 5.305986] Registering SWP/SWPB emulation handler [ 5.411577] registered taskstats version 1 [ 5.434665] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 5.474850] Key type .fscrypt registered [ 5.475675] Key type fscrypt-provisioning registered [ 5.516120] Btrfs loaded, zoned=no, fsverity=no [ 5.522269] Key type encrypted registered [ 5.530298] printk: console [netcon0] enabled [ 5.531575] netconsole: network logging started [ 5.754487] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 5.759763] IP-Config: Complete: [ 5.761127] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 5.763155] host=192.168.7.6, domain=, nis-domain=(none) [ 5.766330] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 5.769485] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.769589] nameserver0=8.8.8.8 [ 5.776209] clk: Disabling unused clocks [ 5.783966] md: Waiting for all devices to be available before autodetect [ 5.784880] md: If you don't use raid, use raid=noautodetect [ 5.785540] md: Autodetecting RAID arrays. [ 5.785991] md: autorun ... [ 5.786346] md: ... autorun DONE. [ 5.913718] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 5.958936] EXT4-fs (vda): mounted filesystem cfb4ef41-a12b-4f0c-b383-8302c5a03486 r/w with ordered data mode. Quota mode: disabled. [ 5.966211] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.973150] devtmpfs: mounted [ 6.403200] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 6.480401] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 [ 6.499117] Freeing unused kernel image (initmem) memory: 2048K [ 6.840756] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 13.654705] hrtimer: interrupt took 79794352 ns [ 14.280801] udevd[129]: starting version 3.2.14 [ 14.719072] udevd[130]: starting eudev-3.2.14 [ 25.807705] EXT4-fs (vda): re-mounted cfb4ef41-a12b-4f0c-b383-8302c5a03486 r/w. Quota mode: disabled. [ 27.452398] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.23-yocto-standard #1 SMP PREEMPT Thu Mar 28 16:04:55 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 1 05:49:25 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-aab1335523688531127ac964ad00131d8e721ab1 qemuarm /dev/hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-AAYAieh0Oe,guid=e9db6c6d00e31269f66231d56631d7ed Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[561]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=542 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[561]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:582): Gtk-WARNING **: 05:49:56.042: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:582): WARNING **: 05:49:56.074: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format