[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.29-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.0.1 20240504 (prerelease), GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Wed May 1 20:42:09 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241088K/262144K available (10781K kernel code, 1426K rwdata, 2872K rodata, 464K init, 339K bss, 21056K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42861 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000223] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000703] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.005608] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.013599] Console: colour dummy device 80x30 [ 0.015518] Calibrating delay loop... 666.41 BogoMIPS (lpj=3332096) [ 0.119238] CPU: Testing write buffer coherency: ok [ 0.120888] pid_max: default: 32768 minimum: 301 [ 0.122471] LSM: initializing lsm=capability,landlock,integrity [ 0.123134] landlock: Up and running. [ 0.126707] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.126780] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.173746] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.174786] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.175426] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.176575] Setting up static identity map for 0x8400 - 0x8458 [ 0.178162] rcu: Hierarchical SRCU implementation. [ 0.178230] rcu: Max phase no-delay instances is 1000. [ 0.193262] devtmpfs: initialized [ 0.210882] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.212415] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.212568] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.224182] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.229539] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.249273] platform bridge: Fixed dependency cycle(s) with /vga [ 0.250720] platform vga: Fixed dependency cycle(s) with /bridge [ 0.268350] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.268699] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.269208] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.275657] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.275982] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.284164] Serial: AMBA PL011 UART driver [ 0.294698] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.296211] printk: console [ttyAMA0] enabled [ 0.333826] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.337009] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.340605] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.342528] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.348549] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.719050] raid6: int32x8 gen() 82 MB/s [ 1.059028] raid6: int32x4 gen() 89 MB/s [ 1.398973] raid6: int32x2 gen() 451 MB/s [ 1.739005] raid6: int32x1 gen() 481 MB/s [ 1.739555] raid6: using algorithm int32x1 gen() 481 MB/s [ 2.005445] raid6: .... xor() 87 MB/s, rmw enabled [ 2.006003] raid6: using intx1 recovery algorithm [ 2.010650] SCSI subsystem initialized [ 2.012601] usbcore: registered new interface driver usbfs [ 2.013327] usbcore: registered new interface driver hub [ 2.015039] usbcore: registered new device driver usb [ 2.020232] pps_core: LinuxPPS API ver. 1 registered [ 2.020629] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.021342] PTP clock support registered [ 2.025103] Advanced Linux Sound Architecture Driver Initialized. [ 2.042950] vgaarb: loaded [ 2.046393] clocksource: Switched to clocksource arm,sp804 [ 2.130489] NET: Registered PF_INET protocol family [ 2.132494] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.142892] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.143597] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.144164] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.144767] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.145406] TCP: Hash tables configured (established 2048 bind 2048) [ 2.147494] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.148269] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.150788] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.155924] RPC: Registered named UNIX socket transport module. [ 2.156612] RPC: Registered udp transport module. [ 2.156979] RPC: Registered tcp transport module. [ 2.157356] RPC: Registered tcp-with-tls transport module. [ 2.157730] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.158318] PCI: CLS 0 bytes, default 32 [ 2.165041] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.172425] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.178969] NFS: Registering the id_resolver key type [ 2.180784] Key type id_resolver registered [ 2.181137] Key type id_legacy registered [ 2.187458] Key type cifs.idmap registered [ 2.416869] xor: measuring software checksum speed [ 2.427990] arm4regs : 970 MB/sec [ 2.436448] 8regs : 1265 MB/sec [ 2.445219] 32regs : 1192 MB/sec [ 2.445584] xor: using function: 8regs (1265 MB/sec) [ 2.446903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.447591] io scheduler mq-deadline registered [ 2.448021] io scheduler kyber registered [ 2.448772] io scheduler bfq registered [ 2.460434] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.462338] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.464259] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.466026] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.468245] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.469491] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.470673] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.471299] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.473075] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.475354] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.476068] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.477355] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.477815] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.478314] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.481049] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 2.482355] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 2.482868] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 2.483310] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 2.487910] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 2.488381] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 2.488843] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.489383] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.490570] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 2.491023] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 2.491427] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.492527] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 2.492977] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.494005] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 2.494471] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.495603] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 2.496054] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 2.496901] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.499737] PCI: bus0: Fast back to back transfers disabled [ 2.501559] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 2.502300] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 2.502967] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 2.503553] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 2.504052] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 2.504569] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 2.505093] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 2.505565] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 2.506060] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.506737] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 2.507196] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 2.507626] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 2.510924] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.513876] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 2.515256] clcd-pl11x: probe of 10120000.display failed with error -2 [ 2.518790] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.521970] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.523652] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.526002] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.529593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.548560] random: crng init done [ 2.552118] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.553153] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.553204] [drm] features: -context_init [ 2.554326] [drm] number of scanouts: 1 [ 2.554630] [drm] number of cap sets: 0 [ 2.570667] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 2.698156] Console: switching to colour frame buffer device 160x50 [ 2.722080] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.735971] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 2.738969] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 2.799117] brd: module loaded [ 2.800249] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 2.806409] virtio_blk virtio3: [vda] 31148 512-byte logical blocks (15.9 MB/15.2 MiB) [ 2.826094] physmap-flash 34000000.flash: versatile/realview flash protection [ 2.845229] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 2.848962] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 2.850721] Intel/Sharp Extended Query Table at 0x0031 [ 2.852131] Using buffer write method [ 2.893817] smc91x: not found (-19). [ 2.895113] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 2.896545] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 2.935172] rtc-ds1307 0-0068: registered as rtc0 [ 2.945240] rtc-ds1307 0-0068: setting system clock to 2024-05-07T01:41:00 UTC (1715046060) [ 2.952591] rtc-pl031 101e8000.rtc: registered as rtc1 [ 2.954043] i2c_dev: i2c /dev entries driver [ 2.955767] versatile reboot driver registered [ 2.960689] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.971684] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 2.977093] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 2.979805] leds-syscon 10000008.0.led: registered LED (null) [ 2.981541] leds-syscon 10000008.1.led: registered LED (null) [ 2.982703] leds-syscon 10000008.2.led: registered LED (null) [ 2.983911] leds-syscon 10000008.3.led: registered LED (null) [ 2.985077] leds-syscon 10000008.4.led: registered LED (null) [ 2.988411] leds-syscon 10000008.5.led: registered LED (null) [ 2.989683] leds-syscon 10000008.6.led: registered LED (null) [ 2.990875] leds-syscon 10000008.7.led: registered LED (null) [ 2.993012] ledtrig-cpu: registered to indicate activity on CPUs [ 2.997169] usbcore: registered new interface driver usbhid [ 2.997851] usbhid: USB HID core driver [ 3.018622] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.045501] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.053782] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.055968] u32 classifier [ 3.056936] input device check on [ 3.057434] Actions configured [ 3.060877] NET: Registered PF_INET6 protocol family [ 3.072435] Segment Routing with IPv6 [ 3.073286] In-situ OAM (IOAM) with IPv6 [ 3.074717] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.080863] NET: Registered PF_PACKET protocol family [ 3.082211] Bridge firewalling registered [ 3.083862] Key type dns_resolver registered [ 3.085308] NET: Registered PF_VSOCK protocol family [ 3.134666] registered taskstats version 1 [ 3.178512] Key type .fscrypt registered [ 3.179133] Key type fscrypt-provisioning registered [ 3.189152] Btrfs loaded, zoned=no, fsverity=no [ 3.198863] Key type encrypted registered [ 3.203997] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.204915] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.208420] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.211249] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.212137] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.213669] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.216111] printk: console [netcon0] enabled [ 3.217788] netconsole: network logging started [ 3.665105] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 3.676187] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.684870] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.693936] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.800070] IP-Config: Complete: [ 3.800747] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 3.802357] host=192.168.7.4, domain=, nis-domain=(none) [ 3.803081] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.803223] nameserver0=8.8.8.8 [ 3.818174] clk: Disabling unused clocks [ 3.819615] ALSA device list: [ 3.820161] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.832820] md: Waiting for all devices to be available before autodetect [ 3.833675] md: If you don't use raid, use raid=noautodetect [ 3.834348] md: Autodetecting RAID arrays. [ 3.834865] md: autorun ... [ 3.835269] md: ... autorun DONE. [ 3.914608] EXT4-fs (vda): mounted filesystem 9a018985-8c1b-4d43-9b94-d5f420bbfd48 r/w with ordered data mode. Quota mode: disabled. [ 3.916117] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.920082] devtmpfs: mounted [ 3.967802] Freeing unused kernel image (initmem) memory: 464K [ 3.968364] Kernel memory protection not selected by kernel config. [ 3.969260] Run /sbin/init as init process INIT: version 3.04 booting Starting udev [ 6.304290] udevd[84]: starting version 3.2.14 [ 6.508805] udevd[85]: starting eudev-3.2.14 [ 10.238744] EXT4-fs (vda): re-mounted 9a018985-8c1b-4d43-9b94-d5f420bbfd48 r/w. Quota mode: disabled. [ 13.938332] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 13.939069] clcd-pl11x: probe of 10120000.display failed with error -2 [ 13.940456] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 13.942071] amba 10100000.smc: deferred probe pending [ 13.942476] amba 10110000.mpmc: deferred probe pending [ 13.942820] amba 101e0000.sctl: deferred probe pending [ 13.943155] amba 101e1000.watchdog: deferred probe pending [ 13.943507] amba 101f0000.sci: deferred probe pending [ 13.943833] amba 101f4000.spi: deferred probe pending [ 13.944158] amba 1000a000.sci: deferred probe pending [ 13.944480] amba 10120000.display: deferred probe pending INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.0+snapshot-8826b84b134a3adf9d381cd7d68a4b4008422875 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: