[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241088K/262144K available (10796K kernel code, 1426K rwdata, 2860K rodata, 460K init, 339K bss, 21056K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42870 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000441] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001824] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.017430] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.036220] Console: colour dummy device 80x30 [ 0.040854] Calibrating delay loop... 400.58 BogoMIPS (lpj=2002944) [ 0.146974] CPU: Testing write buffer coherency: ok [ 0.152273] pid_max: default: 32768 minimum: 301 [ 0.156160] LSM: initializing lsm=capability,landlock,integrity [ 0.158332] landlock: Up and running. [ 0.166637] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.166922] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.314230] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.318891] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.320693] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.324679] Setting up static identity map for 0x8400 - 0x8458 [ 0.329278] rcu: Hierarchical SRCU implementation. [ 0.329466] rcu: Max phase no-delay instances is 1000. [ 0.373610] devtmpfs: initialized [ 0.421735] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.426051] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.426435] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.457859] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.472029] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.533343] platform bridge: Fixed dependency cycle(s) with /vga [ 0.536839] platform vga: Fixed dependency cycle(s) with /bridge [ 0.588625] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.589760] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.590522] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.608882] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.610008] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.629223] Serial: AMBA PL011 UART driver [ 0.658811] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.663357] printk: console [ttyAMA0] enabled [ 0.766135] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.786911] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.800978] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.809361] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.826464] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.237957] raid6: int32x8 gen() 27 MB/s [ 1.607898] raid6: int32x4 gen() 56 MB/s [ 1.947927] raid6: int32x2 gen() 63 MB/s [ 2.287819] raid6: int32x1 gen() 176 MB/s [ 2.292838] raid6: using algorithm int32x1 gen() 176 MB/s [ 2.647876] raid6: .... xor() 98 MB/s, rmw enabled [ 2.654240] raid6: using intx1 recovery algorithm [ 2.699678] SCSI subsystem initialized [ 2.718726] usbcore: registered new interface driver usbfs [ 2.726652] usbcore: registered new interface driver hub [ 2.749347] usbcore: registered new device driver usb [ 2.802569] pps_core: LinuxPPS API ver. 1 registered [ 2.818067] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.839257] PTP clock support registered [ 2.864121] Advanced Linux Sound Architecture Driver Initialized. [ 2.974260] vgaarb: loaded [ 3.010585] clocksource: Switched to clocksource arm,sp804 [ 4.112004] NET: Registered PF_INET protocol family [ 4.123933] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 4.157582] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 4.168948] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 4.174462] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 4.176581] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 4.177383] TCP: Hash tables configured (established 2048 bind 2048) [ 4.181828] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 4.185734] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 4.202895] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 4.223462] RPC: Registered named UNIX socket transport module. [ 4.231316] RPC: Registered udp transport module. [ 4.233514] RPC: Registered tcp transport module. [ 4.233891] RPC: Registered tcp-with-tls transport module. [ 4.234249] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.235164] PCI: CLS 0 bytes, default 32 [ 4.241597] NetWinder Floating Point Emulator V0.97 (double precision) [ 4.276175] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 4.305324] NFS: Registering the id_resolver key type [ 4.309278] Key type id_resolver registered [ 4.310934] Key type id_legacy registered [ 4.323835] Key type cifs.idmap registered [ 4.925643] xor: measuring software checksum speed [ 4.958881] arm4regs : 416 MB/sec [ 4.986747] 8regs : 494 MB/sec [ 5.016221] 32regs : 475 MB/sec [ 5.023213] xor: using function: 8regs (494 MB/sec) [ 5.032270] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 5.035623] io scheduler mq-deadline registered [ 5.036496] io scheduler kyber registered [ 5.038334] io scheduler bfq registered [ 5.072847] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 5.085689] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 5.098442] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 5.106034] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 5.110809] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 5.113957] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 5.117033] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 5.118771] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 5.123711] versatile-pci 10001000.pci: PCI core found (slot 11) [ 5.136457] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 5.138399] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.139990] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 5.141825] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 5.143049] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 5.149795] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 5.160632] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 5.168025] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 5.169121] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 5.181742] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 5.183046] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 5.184094] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 5.185197] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 5.188481] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 5.198052] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 5.205027] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 5.208563] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 5.209673] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 5.214005] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 5.222732] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 5.229860] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 5.238532] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 5.244714] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 5.251342] PCI: bus0: Fast back to back transfers disabled [ 5.255963] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 5.257726] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 5.259278] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 5.264298] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 5.265502] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 5.266717] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 5.267924] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 5.268944] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 5.269895] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 5.271125] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 5.272017] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 5.272921] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 5.277740] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 5.286687] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.289851] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.298299] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 5.315179] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 5.319376] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 5.325503] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 5.336604] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.402012] random: crng init done [ 5.412739] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 5.415753] [drm] features: -virgl +edid -resource_blob -host_visible [ 5.415952] [drm] features: -context_init [ 5.418910] [drm] number of scanouts: 1 [ 5.420976] [drm] number of cap sets: 0 [ 5.463775] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 5.764896] Console: switching to colour frame buffer device 160x50 [ 5.847552] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 5.879580] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 5.885622] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.072454] brd: module loaded [ 6.075271] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 6.099711] virtio_blk virtio3: [vda] 959684 512-byte logical blocks (491 MB/469 MiB) [ 6.153619] physmap-flash 34000000.flash: versatile/realview flash protection [ 6.206405] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 6.212024] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 6.214512] Intel/Sharp Extended Query Table at 0x0031 [ 6.217279] Using buffer write method [ 6.341964] smc91x: not found (-19). [ 6.345333] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 6.347265] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 6.415134] rtc-ds1307 0-0068: registered as rtc0 [ 6.428497] rtc-ds1307 0-0068: setting system clock to 2024-05-15T14:10:30 UTC (1715782230) [ 6.456189] rtc-pl031 101e8000.rtc: registered as rtc1 [ 6.466466] i2c_dev: i2c /dev entries driver [ 6.474405] versatile reboot driver registered [ 6.489722] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 6.507863] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 6.548401] leds-syscon 10000008.0.led: registered LED (null) [ 6.555261] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 6.560926] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 6.567721] leds-syscon 10000008.1.led: registered LED (null) [ 6.582621] leds-syscon 10000008.2.led: registered LED (null) [ 6.585423] leds-syscon 10000008.3.led: registered LED (null) [ 6.587369] leds-syscon 10000008.4.led: registered LED (null) [ 6.614062] leds-syscon 10000008.5.led: registered LED (null) [ 6.616425] leds-syscon 10000008.6.led: registered LED (null) [ 6.638647] leds-syscon 10000008.7.led: registered LED (null) [ 6.644647] ledtrig-cpu: registered to indicate activity on CPUs [ 6.677915] usbcore: registered new interface driver usbhid [ 6.690829] usbhid: USB HID core driver [ 6.751452] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.754520] aaci-pl041 10004000.aaci: FIFO 512 entries [ 6.757431] u32 classifier [ 6.757974] input device check on [ 6.758550] Actions configured [ 6.764405] NET: Registered PF_INET6 protocol family [ 6.799041] Segment Routing with IPv6 [ 6.804281] In-situ OAM (IOAM) with IPv6 [ 6.806436] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.816410] NET: Registered PF_PACKET protocol family [ 6.819963] Bridge firewalling registered [ 6.826026] Key type dns_resolver registered [ 6.851977] NET: Registered PF_VSOCK protocol family [ 6.946700] registered taskstats version 1 [ 7.082390] Key type .fscrypt registered [ 7.094062] Key type fscrypt-provisioning registered [ 7.108250] Btrfs loaded, zoned=no, fsverity=no [ 7.135398] Key type encrypted registered [ 7.145538] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 7.146896] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.149125] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.157206] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 7.158645] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.162677] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.166833] printk: console [netcon0] enabled [ 7.167905] netconsole: network logging started [ 7.279410] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 7.289340] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 7.293541] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.303273] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.403849] IP-Config: Complete: [ 7.404846] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 7.407094] host=192.168.7.2, domain=, nis-domain=(none) [ 7.408063] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 7.408246] nameserver0=8.8.8.8 [ 7.442222] clk: Disabling unused clocks [ 7.448731] ALSA device list: [ 7.454513] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 7.498575] md: Waiting for all devices to be available before autodetect [ 7.499953] md: If you don't use raid, use raid=noautodetect [ 7.503898] md: Autodetecting RAID arrays. [ 7.504782] md: autorun ... [ 7.505351] md: ... autorun DONE. [ 7.802744] EXT4-fs (vda): mounted filesystem 4d4473ee-3f45-4f58-bd2d-f49e3797f606 r/w with ordered data mode. Quota mode: disabled. [ 7.806272] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 7.817047] devtmpfs: mounted [ 7.939548] Freeing unused kernel image (initmem) memory: 460K [ 7.943279] Kernel memory protection not selected by kernel config. [ 7.952839] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 17.794303] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 17.796161] clcd-pl11x: probe of 10120000.display failed with error -2 [ 17.799383] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 17.814099] amba 10100000.smc: deferred probe pending [ 17.831379] amba 10110000.mpmc: deferred probe pending [ 17.838779] amba 101e0000.sctl: deferred probe pending [ 17.861189] amba 101e1000.watchdog: deferred probe pending [ 17.869119] amba 101f0000.sci: deferred probe pending [ 17.896395] amba 101f4000.spi: deferred probe pending [ 17.913016] amba 1000a000.sci: deferred probe pending [ 17.919780] amba 10120000.display: deferred probe pending [ 18.649008] udevd[97]: starting version 3.2.14 [ 19.219903] udevd[98]: starting eudev-3.2.14 [ 67.166730] EXT4-fs (vda): re-mounted 4d4473ee-3f45-4f58-bd2d-f49e3797f606 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.23-yocto-standard #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 15 14:12:10 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.1 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-C2E8PM2I1J,guid=8f5abb34d9a9b6af5b5460316644c2fc Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[543]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=524 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[543]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry