[ 0.000000] Linux version 6.6.29-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Mon May 6 17:54:05 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239040K/262140K available (14414K kernel code, 1470K rwdata, 2764K rodata, 412K init, 395K bss, 23100K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.32 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11933598657 ns [ 0.000539] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13408537596ns [ 0.033951] Console: colour dummy device 80x25 [ 0.036572] printk: console [tty0] enabled [ 0.043542] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.29-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Mon May 6 17:54:05 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239040K/262140K available (14414K kernel code, 1470K rwdata, 2764K rodata, 412K init, 395K bss, 23100K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.32 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11933598657 ns [ 0.000539] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13408537596ns [ 0.033951] Console: colour dummy device 80x25 [ 0.036572] printk: console [tty0] enabled [ 0.043542] printk: bootconsole [uart8250] disabled [ 0.052627] Calibrating delay loop... 669.28 BogoMIPS (lpj=3346432) [ 0.097051] pid_max: default: 32768 minimum: 301 [ 0.100815] LSM: initializing lsm=capability,landlock,integrity [ 0.102352] landlock: Up and running. [ 0.110150] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.110617] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.207442] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.209051] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.210185] Performance counters: No available PMU. [ 0.212015] rcu: Hierarchical SRCU implementation. [ 0.212118] rcu: Max phase no-delay instances is 1000. [ 0.229219] smp: Bringing up secondary CPUs ... [ 0.230094] smp: Brought up 1 node, 1 CPU [ 0.259273] devtmpfs: initialized [ 0.279483] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.280110] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.302351] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.749311] raid6: int32x8 gen() 112 MB/s [ 1.104178] raid6: int32x4 gen() 259 MB/s [ 1.459389] raid6: int32x2 gen() 353 MB/s [ 1.810993] raid6: int32x1 gen() 279 MB/s [ 1.811361] raid6: using algorithm int32x2 gen() 353 MB/s [ 2.163291] raid6: .... xor() 210 MB/s, rmw enabled [ 2.163700] raid6: using intx1 recovery algorithm [ 2.171099] SCSI subsystem initialized [ 2.172623] usbcore: registered new interface driver usbfs [ 2.184243] usbcore: registered new interface driver hub [ 2.184980] usbcore: registered new device driver usb [ 2.186024] pps_core: LinuxPPS API ver. 1 registered [ 2.186168] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.186564] PTP clock support registered [ 2.270077] PCI host bridge to bus 0000:00 [ 2.271051] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.272433] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.272851] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.287450] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.289382] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.289683] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.290079] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.290316] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.290572] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.290824] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.308387] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.310850] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.311752] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.312164] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.312359] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.312607] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.312806] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.313936] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.314361] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.315832] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.317238] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.317622] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.328921] pci 0000:00:0a.3: quirk_piix4_acpi+0x0/0x188 took 19531 usecs [ 2.331130] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.331440] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.331847] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.332118] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.333463] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.333734] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.334086] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.334426] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.335557] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.335801] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.336080] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.337177] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.337421] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.337698] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.350411] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.354305] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.355234] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.355587] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.355856] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.356290] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.356558] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.356885] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.357180] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.357402] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.357569] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.357761] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.357958] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.382585] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.382976] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.383251] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.383580] vgaarb: loaded [ 2.390451] clocksource: Switched to clocksource MIPS [ 3.021009] NET: Registered PF_INET protocol family [ 3.024105] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.044119] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 3.044670] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.045021] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.045578] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 3.046032] TCP: Hash tables configured (established 2048 bind 2048) [ 3.049531] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.050293] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.054490] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.061804] RPC: Registered named UNIX socket transport module. [ 3.062127] RPC: Registered udp transport module. [ 3.062253] RPC: Registered tcp transport module. [ 3.062371] RPC: Registered tcp-with-tls transport module. [ 3.062490] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.064495] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 3.066809] PCI: CLS 0 bytes, default 16 [ 3.088650] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.101196] NFS: Registering the id_resolver key type [ 3.104669] Key type id_resolver registered [ 3.104966] Key type id_legacy registered [ 3.111164] Key type cifs.idmap registered [ 4.052225] xor: measuring software checksum speed [ 4.075651] 8regs : 447 MB/sec [ 4.099959] 8regs_prefetch : 416 MB/sec [ 4.122740] 32regs : 450 MB/sec [ 4.163926] 32regs_prefetch : 243 MB/sec [ 4.164300] xor: using function: 32regs (450 MB/sec) [ 4.165320] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 4.165856] io scheduler mq-deadline registered [ 4.166116] io scheduler kyber registered [ 4.180868] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 4.189563] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 4.192368] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 4.198211] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.218456] printk: console [ttyS0] disabled [ 4.252851] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.253206] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 4.257447] printk: console [ttyS0] enabled [ 4.446122] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.447919] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 4.449172] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 4.475243] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 4.481859] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 4.484892] [drm] Found bochs VGA, ID 0xb0c5. [ 4.485963] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 4.498347] [drm] Found EDID data blob. [ 4.523834] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 4.716008] Console: switching to colour frame buffer device 160x50 [ 4.777064] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 4.861708] brd: module loaded [ 4.865988] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 4.884700] virtio_blk virtio2: [vda] 1145272 512-byte logical blocks (586 MB/559 MiB) [ 4.955020] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 4.966383] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 4.985751] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 5.007342] hub 1-0:1.0: USB hub found [ 5.012507] hub 1-0:1.0: 2 ports detected [ 5.035244] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.041561] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.049562] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.064946] usbcore: registered new interface driver usbhid [ 5.066795] usbhid: USB HID core driver [ 5.069975] u32 classifier [ 5.071462] input device check on [ 5.072332] Actions configured [ 5.080596] NET: Registered PF_INET6 protocol family [ 5.110958] Segment Routing with IPv6 [ 5.116170] In-situ OAM (IOAM) with IPv6 [ 5.120764] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.135005] NET: Registered PF_PACKET protocol family [ 5.139004] Bridge firewalling registered [ 5.143250] Key type dns_resolver registered [ 5.147509] NET: Registered PF_VSOCK protocol family [ 5.176091] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 5.306429] registered taskstats version 1 [ 5.383359] Key type .fscrypt registered [ 5.403023] Key type fscrypt-provisioning registered [ 5.430695] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 5.475954] Btrfs loaded, zoned=no, fsverity=no [ 5.586488] Key type encrypted registered [ 5.620325] printk: console [netcon0] enabled [ 5.658491] netconsole: network logging started [ 5.774450] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 5.799560] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 5.861820] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 5.979074] IP-Config: Complete: [ 6.012244] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 6.042739] host=192.168.7.2, domain=, nis-domain=(none) [ 6.082016] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 6.082278] nameserver0=8.8.8.8 [ 6.168332] clk: Disabling unused clocks [ 6.216354] md: Waiting for all devices to be available before autodetect [ 6.238209] md: If you don't use raid, use raid=noautodetect [ 6.296777] md: Autodetecting RAID arrays. [ 6.336953] md: autorun ... [ 6.363445] md: ... autorun DONE. [ 6.540132] EXT4-fs (vda): mounted filesystem 18fe7d45-1f30-40f6-a545-d2c7d0429142 r/w with ordered data mode. Quota mode: disabled. [ 6.581691] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.621865] devtmpfs: mounted [ 6.785145] Freeing unused kernel image (initmem) memory: 412K [ 6.823326] This architecture does not have kernel memory protection. [ 6.857103] Run /sbin/init as init process [ 6.926627] process '/sbin/init.sysvinit' started with executable stack [ 13.277387] udevd[94]: starting version 3.2.14 [ 13.572876] udevd[95]: starting eudev-3.2.14 [ 34.490595] EXT4-fs (vda): re-mounted 18fe7d45-1f30-40f6-a545-d2c7d0429142 r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.12 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.29-yocto-standard #1 SMP PREEMPT Mon May 6 17:54:05 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 18 22:54:12 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-a07e16fdc1592e47c478d484d91e5a9d439e688e qemumips /dev/ttyS0 qemumips login: