[    4.426129] [drm] Initialized virtio_gpu 0.1.0 0 for virtio4 on minor 0
[    4.489090] virtio_gpu virtio4: [drm] drm_plane_enable_fb_damage_clips() not called
[    4.535849] Console: switching to colour frame buffer device 128x48
[    4.552697] virtio_gpu virtio4: [drm] fb0: virtio_gpudrmfb frame buffer device
[    4.604537] brd: module loaded
[    4.610185] virtio_blk virtio1: [vda] 4397062 512-byte logical blocks (2.25 GB/2.10 GiB)
[    4.640540] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    4.641723] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    4.646508] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    4.650891] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    4.651223] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    4.651969] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    4.661769] hub 1-0:1.0: USB hub found
[    4.662797] hub 1-0:1.0: 4 ports detected
[    4.668266] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.671277] hub 2-0:1.0: USB hub found
[    4.672110] hub 2-0:1.0: 4 ports detected
[    4.681227] rtc-pl031 9010000.pl031: registered as rtc0
[    4.682888] rtc-pl031 9010000.pl031: setting system clock to 2024-05-23T18:03:19 UTC (1716487399)
[    4.692212] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    4.696956] usbcore: registered new interface driver usbhid
[    4.697281] usbhid: USB HID core driver
[    4.698256] u32 classifier
[    4.698438]     input device check on
[    4.698626]     Actions configured
[    4.701219] NET: Registered PF_INET6 protocol family
[    4.713457] Segment Routing with IPv6
[    4.713871] In-situ OAM (IOAM) with IPv6
[    4.714955] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    4.718617] NET: Registered PF_PACKET protocol family
[    4.719822] Bridge firewalling registered
[    4.721155] Key type dns_resolver registered
[    4.722463] NET: Registered PF_VSOCK protocol family
[    4.723612] Registering SWP/SWPB emulation handler
[    4.774028] Key type .fscrypt registered
[    4.774333] Key type fscrypt-provisioning registered
[    4.780087] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    4.783007] Key type encrypted registered
[    4.785772] printk: console [netcon0] enabled
[    4.786054] netconsole: network logging started
[    4.853060] IP-Config: Complete:
[    4.853795]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    4.855310]      host=192.168.7.6, domain=, nis-domain=(none)
[    4.855938]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    4.856083]      nameserver0=8.8.8.8
[    4.865958] clk: Disabling unused clocks
[    4.870925] md: Waiting for all devices to be available before autodetect
[    4.871336] md: If you don't use raid, use raid=noautodetect
[    4.872159] md: Autodetecting RAID arrays.
[    4.872424] md: autorun ...
[    4.872628] md: ... autorun DONE.
[    4.923071] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    4.925364] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.929465] devtmpfs: mounted
[    5.077153] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    5.152458] Freeing unused kernel image (initmem) memory: 2048K
[    5.346214] Run /sbin/init as init process
[    5.464906] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    5.467513] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
INIT: version 3.01 booting
[    5.621829] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    5.823648] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    5.902837] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    7.766300] udevd[172]: starting version 3.2.10
[    7.898583] udevd[173]: starting eudev-3.2.10
[   11.686705] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
[   12.217025] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
Configuring packages on first boot....
 (This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
 Removing any system startup links for run-postinsts ...
  /etc/rcS.d/S99run-postinsts
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 5.15.157-yocto-standard #1 SMP PREEMPT Thu May 2 16:12:23 UTC 2024 armv7l
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyAMA0 console=hvc0 vmalloc=256  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 23 18:03:36 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-cwse3zWFFS,guid=de60a857a82363c394e065ba664f84fa
[A[74G[ ok ]
Starting Telephony daemon
No makedumpfile found.
Using calibration data stored in /etc/pointercal.xinput
Starting crond: OK
Using calibration data stored in /etc/pointercal.xinput
Starting tcf-agent: OK
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop


Poky (Yocto Project Reference Distro) 4.0.18 qemuarm hvc0

qemuarm login: [settings daemon] Forking. run with -n to prevent fork
dbus-daemon[664]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=638 comm="connman-applet")
matchbox-wm: X error warning (0xa00003): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[664]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
[ 1591.407081] hellomod: loading out-of-tree module taints kernel.
[ 1591.422306] Hello world!
[ 1596.071811] Cleaning up hellomod.
