[ 0.000000] Linux version 6.6.29-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Mon May 6 17:54:05 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238912K/262140K available (14528K kernel code, 1464K rwdata, 2760K rodata, 436K init, 395K bss, 23228K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 319.99 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945571161 ns [ 0.000240] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421989884ns [ 0.020006] Console: colour dummy device 80x25 [ 0.021048] printk: console [tty0] enabled [ 0.021908] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.29-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Mon May 6 17:54:05 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238912K/262140K available (14528K kernel code, 1464K rwdata, 2760K rodata, 436K init, 395K bss, 23228K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 319.99 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945571161 ns [ 0.000240] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421989884ns [ 0.020006] Console: colour dummy device 80x25 [ 0.021048] printk: console [tty0] enabled [ 0.021908] printk: bootconsole [uart8250] disabled [ 0.024596] Calibrating delay loop... 950.27 BogoMIPS (lpj=4751360) [ 0.126535] pid_max: default: 32768 minimum: 301 [ 0.128276] LSM: initializing lsm=capability,landlock,integrity [ 0.128959] landlock: Up and running. [ 0.132267] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.132442] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.182840] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.183747] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.184348] Performance counters: No available PMU. [ 0.185649] rcu: Hierarchical SRCU implementation. [ 0.185729] rcu: Max phase no-delay instances is 1000. [ 0.194660] smp: Bringing up secondary CPUs ... [ 0.195018] smp: Brought up 1 node, 1 CPU [ 0.233008] devtmpfs: initialized [ 0.243654] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.244013] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.255711] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.663879] raid6: int32x8 gen() 283 MB/s [ 1.006488] raid6: int32x4 gen() 667 MB/s [ 1.334422] raid6: int32x2 gen() 564 MB/s [ 1.500880] raid6: int32x1 gen() 579 MB/s [ 1.501078] raid6: using algorithm int32x4 gen() 667 MB/s [ 1.672047] raid6: .... xor() 372 MB/s, rmw enabled [ 1.672258] raid6: using intx1 recovery algorithm [ 1.675807] SCSI subsystem initialized [ 1.676523] usbcore: registered new interface driver usbfs [ 1.676889] usbcore: registered new interface driver hub [ 1.677171] usbcore: registered new device driver usb [ 1.677642] pps_core: LinuxPPS API ver. 1 registered [ 1.677709] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.677901] PTP clock support registered [ 1.697293] PCI host bridge to bus 0000:00 [ 1.697718] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.698336] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.698534] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.700308] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 1.701169] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 1.701354] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.701530] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.701634] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.701742] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.701847] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.839654] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.840656] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.841011] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.841193] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.841283] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.841389] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.841470] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.841938] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.842128] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.842962] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.844926] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.845097] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.845753] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.845865] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.846032] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.846151] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.846711] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.846859] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.847014] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.847179] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.847649] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.847775] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.847901] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.848401] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.848531] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.848656] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.849490] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.851065] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.851427] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.851576] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.851689] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.851867] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.851981] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.852115] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.852254] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.852348] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.852421] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.852502] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.852585] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.854914] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 1.855077] pci 0000:00:12.0: vgaarb: bridge control possible [ 1.855213] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.855346] vgaarb: loaded [ 1.857734] clocksource: Switched to clocksource MIPS [ 1.918216] NET: Registered PF_INET protocol family [ 1.919705] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.928565] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.928785] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.928938] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.929193] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.929417] TCP: Hash tables configured (established 2048 bind 2048) [ 1.930840] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.931147] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.933042] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.936315] RPC: Registered named UNIX socket transport module. [ 1.936431] RPC: Registered udp transport module. [ 1.936488] RPC: Registered tcp transport module. [ 1.936539] RPC: Registered tcp-with-tls transport module. [ 1.936589] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.937554] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.938691] PCI: CLS 0 bytes, default 16 [ 1.960206] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.965062] NFS: Registering the id_resolver key type [ 1.970174] Key type id_resolver registered [ 1.970281] Key type id_legacy registered [ 1.972944] Key type cifs.idmap registered [ 2.331419] xor: measuring software checksum speed [ 2.341668] 8regs : 1067 MB/sec [ 2.351646] 8regs_prefetch : 1027 MB/sec [ 2.361057] 32regs : 1073 MB/sec [ 2.371141] 32regs_prefetch : 1026 MB/sec [ 2.371288] xor: using function: 32regs (1073 MB/sec) [ 2.371879] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.372126] io scheduler mq-deadline registered [ 2.372263] io scheduler kyber registered [ 2.378497] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.382090] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.383502] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.386069] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.394936] printk: console [ttyS0] disabled [ 2.420845] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.421027] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.447208] printk: console [ttyS0] enabled [ 2.545981] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.546717] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.547593] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.556827] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 2.559506] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.560849] [drm] Found bochs VGA, ID 0xb0c5. [ 2.561296] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.566258] [drm] Found EDID data blob. [ 2.574245] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.725549] Console: switching to colour frame buffer device 160x50 [ 2.740798] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.789251] brd: module loaded [ 2.790691] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 2.797013] virtio_blk virtio2: [vda] 1147820 512-byte logical blocks (588 MB/560 MiB) [ 2.828078] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 2.830017] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 2.831722] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 2.841805] hub 1-0:1.0: USB hub found [ 2.843070] hub 1-0:1.0: 2 ports detected [ 2.853214] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.855005] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.864896] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.869462] usbcore: registered new interface driver usbhid [ 2.870068] usbhid: USB HID core driver [ 2.871242] u32 classifier [ 2.871601] input device check on [ 2.872017] Actions configured [ 2.875207] NET: Registered PF_INET6 protocol family [ 2.898144] Segment Routing with IPv6 [ 2.899114] In-situ OAM (IOAM) with IPv6 [ 2.900650] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.905487] NET: Registered PF_PACKET protocol family [ 2.906767] Bridge firewalling registered [ 2.908722] Key type dns_resolver registered [ 2.909873] NET: Registered PF_VSOCK protocol family [ 2.940020] registered taskstats version 1 [ 2.969579] Key type .fscrypt registered [ 2.974757] Key type fscrypt-provisioning registered [ 3.001064] Btrfs loaded, zoned=no, fsverity=no [ 3.039591] Key type encrypted registered [ 3.055307] printk: console [netcon0] enabled [ 3.061716] netconsole: network logging started [ 3.147956] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.564574] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 [ 3.572214] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 3.589078] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 3.688827] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.747756] IP-Config: Complete: [ 3.753304] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 3.762998] host=192.168.7.6, domain=, nis-domain=(none) [ 3.775889] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.776013] nameserver0=8.8.8.8 [ 3.797966] clk: Disabling unused clocks [ 3.823017] md: Waiting for all devices to be available before autodetect [ 3.847509] md: If you don't use raid, use raid=noautodetect [ 3.867614] md: Autodetecting RAID arrays. [ 3.897504] md: autorun ... [ 3.917503] md: ... autorun DONE. [ 4.149867] EXT4-fs (vda): mounted filesystem 480a96af-6c6c-48c4-9de1-2c4b8a6effef r/w with ordered data mode. Quota mode: disabled. [ 4.173717] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.205338] devtmpfs: mounted [ 4.353283] Freeing unused kernel image (initmem) memory: 436K [ 4.383119] This architecture does not have kernel memory protection. [ 4.429126] Run /sbin/init as init process [ 4.514929] process '/sbin/init.sysvinit' started with executable stack [ 11.918795] udevd[93]: starting version 3.2.14 [ 12.348337] udevd[94]: starting eudev-3.2.14 [ 30.349660] EXT4-fs (vda): re-mounted 480a96af-6c6c-48c4-9de1-2c4b8a6effef r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.12 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.29-yocto-standard #1 SMP PREEMPT Mon May 6 17:54:05 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 24 03:25:52 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-5f602c1bd57e1623ba2d46d374782e27c9547af3 qemumips /dev/ttyS0 qemumips login: