[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241088K/262144K available (10796K kernel code, 1426K rwdata, 2860K rodata, 460K init, 339K bss, 21056K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42870 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000380] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001469] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.012099] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.028266] Console: colour dummy device 80x30 [ 0.031835] Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904) [ 0.127460] CPU: Testing write buffer coherency: ok [ 0.130501] pid_max: default: 32768 minimum: 301 [ 0.133100] LSM: initializing lsm=capability,landlock,integrity [ 0.134416] landlock: Up and running. [ 0.140374] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.140623] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.229248] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.231799] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.232976] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.235311] Setting up static identity map for 0x8400 - 0x8458 [ 0.239281] rcu: Hierarchical SRCU implementation. [ 0.239464] rcu: Max phase no-delay instances is 1000. [ 0.273665] devtmpfs: initialized [ 0.311256] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.314708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.315064] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.340785] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.350645] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.391449] platform bridge: Fixed dependency cycle(s) with /vga [ 0.393783] platform vga: Fixed dependency cycle(s) with /bridge [ 0.433611] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.434549] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.435652] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.451783] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.452580] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.467440] Serial: AMBA PL011 UART driver [ 0.487321] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.490427] printk: console [ttyAMA0] enabled [ 0.534139] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.541363] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.548680] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.552926] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.568968] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.969801] raid6: int32x8 gen() 38 MB/s [ 1.298063] raid6: int32x4 gen() 69 MB/s [ 1.648164] raid6: int32x2 gen() 94 MB/s [ 1.988122] raid6: int32x1 gen() 279 MB/s [ 1.989061] raid6: using algorithm int32x1 gen() 279 MB/s [ 2.328193] raid6: .... xor() 132 MB/s, rmw enabled [ 2.329180] raid6: using intx1 recovery algorithm [ 2.350402] SCSI subsystem initialized [ 2.369260] usbcore: registered new interface driver usbfs [ 2.376518] usbcore: registered new interface driver hub [ 2.389085] usbcore: registered new device driver usb [ 2.425074] pps_core: LinuxPPS API ver. 1 registered [ 2.448189] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.456685] PTP clock support registered [ 2.473307] Advanced Linux Sound Architecture Driver Initialized. [ 2.555714] vgaarb: loaded [ 2.575643] clocksource: Switched to clocksource arm,sp804 [ 3.223927] NET: Registered PF_INET protocol family [ 3.229517] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.253063] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.261132] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.262413] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.263024] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.264803] TCP: Hash tables configured (established 2048 bind 2048) [ 3.268637] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.271282] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.275470] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.286054] RPC: Registered named UNIX socket transport module. [ 3.287046] RPC: Registered udp transport module. [ 3.287613] RPC: Registered tcp transport module. [ 3.288208] RPC: Registered tcp-with-tls transport module. [ 3.288831] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.289877] PCI: CLS 0 bytes, default 32 [ 3.296350] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.317294] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.329716] NFS: Registering the id_resolver key type [ 3.333022] Key type id_resolver registered [ 3.333756] Key type id_legacy registered [ 3.345852] Key type cifs.idmap registered [ 3.840438] xor: measuring software checksum speed [ 3.860942] arm4regs : 531 MB/sec [ 3.879725] 8regs : 611 MB/sec [ 3.898037] 32regs : 599 MB/sec [ 3.901017] xor: using function: 8regs (611 MB/sec) [ 3.903280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.904066] io scheduler mq-deadline registered [ 3.904523] io scheduler kyber registered [ 3.906585] io scheduler bfq registered [ 3.928863] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 3.933317] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 3.938535] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 3.950753] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 3.954277] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 3.957074] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 3.962586] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 3.963477] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 3.967584] versatile-pci 10001000.pci: PCI core found (slot 11) [ 3.975812] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 3.977272] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.978796] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.979621] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 3.980570] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 3.987640] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 3.991416] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 3.992329] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 3.992701] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.001962] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.010115] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.011762] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.012893] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.016717] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.017830] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.018715] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.021583] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.022500] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.025001] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.026932] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.030201] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.031239] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.032093] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.037244] PCI: bus0: Fast back to back transfers disabled [ 4.041427] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.042927] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.043944] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.044472] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.045926] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.046960] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.047963] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.048896] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.049808] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.050614] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.051209] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.051935] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.056385] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.062817] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.066157] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.072656] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.080302] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.084216] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.089879] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.099281] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.144901] random: crng init done [ 4.152308] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 4.154359] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.154476] [drm] features: -context_init [ 4.157258] [drm] number of scanouts: 1 [ 4.157917] [drm] number of cap sets: 0 [ 4.245580] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 4.486979] Console: switching to colour frame buffer device 160x50 [ 4.561519] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.602780] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 4.621590] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.784142] brd: module loaded [ 4.791078] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 4.808003] virtio_blk virtio3: [vda] 959716 512-byte logical blocks (491 MB/469 MiB) [ 4.859119] physmap-flash 34000000.flash: versatile/realview flash protection [ 4.893883] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 4.909252] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 4.919975] Intel/Sharp Extended Query Table at 0x0031 [ 4.922198] Using buffer write method [ 5.016642] smc91x: not found (-19). [ 5.019781] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 5.046003] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 5.122938] rtc-ds1307 0-0068: registered as rtc0 [ 5.135658] rtc-ds1307 0-0068: setting system clock to 2024-05-29T18:47:03 UTC (1717008423) [ 5.155250] rtc-pl031 101e8000.rtc: registered as rtc1 [ 5.158422] i2c_dev: i2c /dev entries driver [ 5.161659] versatile reboot driver registered [ 5.168515] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.190925] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 5.200322] leds-syscon 10000008.0.led: registered LED (null) [ 5.202861] leds-syscon 10000008.1.led: registered LED (null) [ 5.204839] leds-syscon 10000008.2.led: registered LED (null) [ 5.212353] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 5.216896] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 5.221947] leds-syscon 10000008.3.led: registered LED (null) [ 5.223127] leds-syscon 10000008.4.led: registered LED (null) [ 5.224514] leds-syscon 10000008.5.led: registered LED (null) [ 5.236922] leds-syscon 10000008.6.led: registered LED (null) [ 5.239299] leds-syscon 10000008.7.led: registered LED (null) [ 5.257496] ledtrig-cpu: registered to indicate activity on CPUs [ 5.298457] usbcore: registered new interface driver usbhid [ 5.301194] usbhid: USB HID core driver [ 5.362827] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.373057] aaci-pl041 10004000.aaci: FIFO 512 entries [ 5.383997] u32 classifier [ 5.388034] input device check on [ 5.388886] Actions configured [ 5.396493] NET: Registered PF_INET6 protocol family [ 5.421938] Segment Routing with IPv6 [ 5.427829] In-situ OAM (IOAM) with IPv6 [ 5.434508] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.453632] NET: Registered PF_PACKET protocol family [ 5.462527] Bridge firewalling registered [ 5.470346] Key type dns_resolver registered [ 5.488153] NET: Registered PF_VSOCK protocol family [ 5.630030] registered taskstats version 1 [ 5.753709] Key type .fscrypt registered [ 5.754439] Key type fscrypt-provisioning registered [ 5.778504] Btrfs loaded, zoned=no, fsverity=no [ 5.814091] Key type encrypted registered [ 5.835341] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.843408] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.854263] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.868523] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.870263] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.872676] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.884835] printk: console [netcon0] enabled [ 5.889437] netconsole: network logging started [ 5.914527] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 5.924188] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.929286] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.937613] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.018169] IP-Config: Complete: [ 6.018887] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 6.020388] host=192.168.7.2, domain=, nis-domain=(none) [ 6.021063] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 6.021205] nameserver0=8.8.8.8 [ 6.049240] clk: Disabling unused clocks [ 6.054298] ALSA device list: [ 6.059234] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.077797] md: Waiting for all devices to be available before autodetect [ 6.078849] md: If you don't use raid, use raid=noautodetect [ 6.079486] md: Autodetecting RAID arrays. [ 6.079800] md: autorun ... [ 6.080056] md: ... autorun DONE. [ 6.397111] EXT4-fs (vda): mounted filesystem a6e69316-5e11-46e9-a1eb-b170960d8c20 r/w with ordered data mode. Quota mode: disabled. [ 6.399327] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.407154] devtmpfs: mounted [ 6.493194] Freeing unused kernel image (initmem) memory: 460K [ 6.494325] Kernel memory protection not selected by kernel config. [ 6.496455] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 15.557914] udevd[97]: starting version 3.2.14 [ 16.010924] udevd[98]: starting eudev-3.2.14 [ 16.498979] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 16.500348] clcd-pl11x: probe of 10120000.display failed with error -2 [ 16.503124] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 16.516983] amba 10100000.smc: deferred probe pending [ 16.517874] amba 10110000.mpmc: deferred probe pending [ 16.518550] amba 101e0000.sctl: deferred probe pending [ 16.519191] amba 101e1000.watchdog: deferred probe pending [ 16.519843] amba 101f0000.sci: deferred probe pending [ 16.520482] amba 101f4000.spi: deferred probe pending [ 16.521101] amba 1000a000.sci: deferred probe pending [ 16.521731] amba 10120000.display: deferred probe pending [ 53.559707] EXT4-fs (vda): re-mounted a6e69316-5e11-46e9-a1eb-b170960d8c20 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.12 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.23-yocto-standard #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 29 18:48:14 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.1 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-IP5GA8asRe,guid=79d8deb29531adb46a2a7ab266577897 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 [settings daemon] Forking. run with -n to prevent fork matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[537]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=518 comm="connman-applet") dbus-daemon[537]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry