[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241088K/262144K available (10796K kernel code, 1426K rwdata, 2860K rodata, 460K init, 339K bss, 21056K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42870 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.002582] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.003926] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.019439] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.037888] Console: colour dummy device 80x30 [ 0.041932] Calibrating delay loop... 363.72 BogoMIPS (lpj=1818624) [ 0.124684] CPU: Testing write buffer coherency: ok [ 0.139111] pid_max: default: 32768 minimum: 301 [ 0.150546] LSM: initializing lsm=capability,landlock,integrity [ 0.154619] landlock: Up and running. [ 0.166492] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.166790] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.419029] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.431426] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.453976] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.462270] Setting up static identity map for 0x8400 - 0x8458 [ 0.474451] rcu: Hierarchical SRCU implementation. [ 0.474735] rcu: Max phase no-delay instances is 1000. [ 0.572763] devtmpfs: initialized [ 0.676814] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.688149] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.688625] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.762790] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.792686] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.922319] platform bridge: Fixed dependency cycle(s) with /vga [ 0.925823] platform vga: Fixed dependency cycle(s) with /bridge [ 0.970801] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.971897] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.972607] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.991530] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.992424] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 1.008564] Serial: AMBA PL011 UART driver [ 1.048352] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 1.051519] printk: console [ttyAMA0] enabled [ 1.153752] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 1.182796] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 1.205075] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 1.219171] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 1.282529] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.719136] raid6: int32x8 gen() 12 MB/s [ 2.076761] raid6: int32x4 gen() 47 MB/s [ 2.423889] raid6: int32x2 gen() 53 MB/s [ 2.772675] raid6: int32x1 gen() 103 MB/s [ 2.789824] raid6: using algorithm int32x1 gen() 103 MB/s [ 3.144737] raid6: .... xor() 47 MB/s, rmw enabled [ 3.145800] raid6: using intx1 recovery algorithm [ 3.187034] SCSI subsystem initialized [ 3.216350] usbcore: registered new interface driver usbfs [ 3.248190] usbcore: registered new interface driver hub [ 3.249836] usbcore: registered new device driver usb [ 3.275556] pps_core: LinuxPPS API ver. 1 registered [ 3.297751] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.318123] PTP clock support registered [ 3.368505] Advanced Linux Sound Architecture Driver Initialized. [ 3.498833] vgaarb: loaded [ 3.532472] clocksource: Switched to clocksource arm,sp804 [ 5.449301] NET: Registered PF_INET protocol family [ 5.479737] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 5.526589] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 5.529920] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 5.530554] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 5.531135] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 5.533457] TCP: Hash tables configured (established 2048 bind 2048) [ 5.544065] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 5.552955] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 5.566636] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 5.586809] RPC: Registered named UNIX socket transport module. [ 5.588826] RPC: Registered udp transport module. [ 5.589204] RPC: Registered tcp transport module. [ 5.589507] RPC: Registered tcp-with-tls transport module. [ 5.594591] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.596680] PCI: CLS 0 bytes, default 32 [ 5.603927] NetWinder Floating Point Emulator V0.97 (double precision) [ 5.649869] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 5.676191] NFS: Registering the id_resolver key type [ 5.684834] Key type id_resolver registered [ 5.686270] Key type id_legacy registered [ 5.716940] Key type cifs.idmap registered [ 6.727491] xor: measuring software checksum speed [ 6.759825] arm4regs : 412 MB/sec [ 6.779902] 8regs : 539 MB/sec [ 6.801614] 32regs : 542 MB/sec [ 6.803595] xor: using function: 32regs (542 MB/sec) [ 6.806362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 6.807552] io scheduler mq-deadline registered [ 6.808453] io scheduler kyber registered [ 6.809723] io scheduler bfq registered [ 6.835096] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 6.839802] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 6.847775] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 6.853552] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 6.860574] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 6.865710] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 6.871598] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 6.875892] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 6.879839] versatile-pci 10001000.pci: PCI core found (slot 11) [ 6.885462] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 6.888255] pci_bus 0000:00: root bus resource [bus 00-ff] [ 6.889780] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 6.894655] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 6.896528] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 6.903480] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 6.908442] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 6.911388] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 6.914849] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 6.951610] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 6.957127] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 6.958023] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 6.961591] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 6.970833] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 6.978474] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 6.979288] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 6.981761] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 6.985666] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 6.993870] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 6.995054] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 6.998120] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 6.999301] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 6.999933] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 7.014375] PCI: bus0: Fast back to back transfers disabled [ 7.019070] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 7.020654] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 7.021668] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 7.023362] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 7.023981] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 7.025186] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 7.030345] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 7.033488] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 7.035787] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 7.037537] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 7.039824] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 7.041416] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 7.050313] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 7.060355] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 7.069586] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.078699] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 7.093825] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 7.101557] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 7.117491] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 7.134732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 7.246527] random: crng init done [ 7.271469] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 7.278235] [drm] features: -virgl +edid -resource_blob -host_visible [ 7.278387] [drm] features: -context_init [ 7.286527] [drm] number of scanouts: 1 [ 7.291367] [drm] number of cap sets: 0 [ 7.336539] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 7.637612] Console: switching to colour frame buffer device 160x50 [ 7.733495] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 7.760757] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 7.764537] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.926950] brd: module loaded [ 7.946301] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 7.966532] virtio_blk virtio3: [vda] 959706 512-byte logical blocks (491 MB/469 MiB) [ 8.027468] physmap-flash 34000000.flash: versatile/realview flash protection [ 8.064077] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 8.074079] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 8.084059] Intel/Sharp Extended Query Table at 0x0031 [ 8.086563] Using buffer write method [ 8.245678] smc91x: not found (-19). [ 8.250464] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 8.254862] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 8.324593] rtc-ds1307 0-0068: registered as rtc0 [ 8.340500] rtc-ds1307 0-0068: setting system clock to 2024-05-31T22:03:25 UTC (1717193005) [ 8.387508] rtc-pl031 101e8000.rtc: registered as rtc1 [ 8.409326] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input1 [ 8.414248] i2c_dev: i2c /dev entries driver [ 8.433999] versatile reboot driver registered [ 8.465454] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 8.518379] leds-syscon 10000008.0.led: registered LED (null) [ 8.528380] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 8.543742] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 8.555476] leds-syscon 10000008.1.led: registered LED (null) [ 8.571785] leds-syscon 10000008.2.led: registered LED (null) [ 8.594854] leds-syscon 10000008.3.led: registered LED (null) [ 8.600357] leds-syscon 10000008.4.led: registered LED (null) [ 8.603929] leds-syscon 10000008.5.led: registered LED (null) [ 8.616974] leds-syscon 10000008.6.led: registered LED (null) [ 8.620547] leds-syscon 10000008.7.led: registered LED (null) [ 8.624496] ledtrig-cpu: registered to indicate activity on CPUs [ 8.636255] usbcore: registered new interface driver usbhid [ 8.644706] usbhid: USB HID core driver [ 8.701588] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 8.708595] aaci-pl041 10004000.aaci: FIFO 512 entries [ 8.713767] u32 classifier [ 8.714745] input device check on [ 8.715291] Actions configured [ 8.728581] NET: Registered PF_INET6 protocol family [ 8.759969] Segment Routing with IPv6 [ 8.761366] In-situ OAM (IOAM) with IPv6 [ 8.765301] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 8.779404] NET: Registered PF_PACKET protocol family [ 8.802704] Bridge firewalling registered [ 8.810388] Key type dns_resolver registered [ 8.815239] NET: Registered PF_VSOCK protocol family [ 8.949608] registered taskstats version 1 [ 9.089043] Key type .fscrypt registered [ 9.094118] Key type fscrypt-provisioning registered [ 9.121423] Btrfs loaded, zoned=no, fsverity=no [ 9.147331] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input3 [ 9.166556] Key type encrypted registered [ 9.184336] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 9.187919] clcd-pl11x: probe of 10120000.display failed with error -2 [ 9.190770] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 9.212507] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 9.218423] clcd-pl11x: probe of 10120000.display failed with error -2 [ 9.221625] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 9.228262] printk: console [netcon0] enabled [ 9.239796] netconsole: network logging started [ 9.333646] IP-Config: Complete: [ 9.337010] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 9.339305] host=192.168.7.4, domain=, nis-domain=(none) [ 9.340148] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 9.340274] nameserver0=8.8.8.8 [ 9.366984] clk: Disabling unused clocks [ 9.368612] ALSA device list: [ 9.369533] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 9.386045] md: Waiting for all devices to be available before autodetect [ 9.387258] md: If you don't use raid, use raid=noautodetect [ 9.388226] md: Autodetecting RAID arrays. [ 9.388647] md: autorun ... [ 9.389038] md: ... autorun DONE. [ 9.657961] EXT4-fs (vda): mounted filesystem 427f4f43-c826-47c7-891a-be778afeb3a8 r/w with ordered data mode. Quota mode: disabled. [ 9.661363] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 9.672858] devtmpfs: mounted [ 9.765294] Freeing unused kernel image (initmem) memory: 460K [ 9.766951] Kernel memory protection not selected by kernel config. [ 9.768208] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 16.905827] udevd[97]: starting version 3.2.14 [ 17.184993] udevd[98]: starting eudev-3.2.14 [ 19.775467] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 19.777302] clcd-pl11x: probe of 10120000.display failed with error -2 [ 19.779756] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 19.835059] amba 10100000.smc: deferred probe pending [ 19.836204] amba 10110000.mpmc: deferred probe pending [ 19.836525] amba 101e0000.sctl: deferred probe pending [ 19.836844] amba 101e1000.watchdog: deferred probe pending [ 19.837187] amba 101f0000.sci: deferred probe pending [ 19.837514] amba 101f4000.spi: deferred probe pending [ 19.837848] amba 1000a000.sci: deferred probe pending [ 19.838444] amba 10120000.display: deferred probe pending [ 51.188231] EXT4-fs (vda): re-mounted 427f4f43-c826-47c7-891a-be778afeb3a8 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: X.Org X Server 1.21.1dropbear. .12 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.23-yocto-standard #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 31 22:04:39 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.1 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-fmLEM3pV31,guid=347d3074bfc94243dc0658cb665a4990 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[532]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=512 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[532]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry