[ 0.000000] Linux version 6.6.29-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240513) #1 SMP PREEMPT_DYNAMIC Mon May 6 17:53:58 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 412844857 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2599.988 MHz processor [ 0.001076] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001095] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001097] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004846] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.004938] ACPI: Early table checksum verification disabled [ 0.004941] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.004949] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004954] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004959] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004962] ACPI: FACS 0x000000001FFE0000 000040 [ 0.004964] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004967] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004970] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004972] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004974] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.004976] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.004976] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.004977] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.004978] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.004979] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.004980] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.005022] Zone ranges: [ 0.005023] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005025] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.005027] Normal empty [ 0.005028] Movable zone start for each node [ 0.005028] Early memory node ranges [ 0.005029] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005030] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.005031] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.005411] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005427] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.007017] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.007294] ACPI: PM-Timer IO Port: 0x608 [ 0.007302] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.007326] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.007329] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.007331] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.007332] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.007334] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.007335] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.007338] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.007339] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.007342] TSC deadline timer available [ 0.007343] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.007354] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.007369] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.007370] Booting paravirtualized kernel on KVM [ 0.007371] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.007375] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.007953] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.007978] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.008055] random: crng init done [ 0.008134] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.008177] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.008231] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.008768] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.009926] Memory: 477740K/523736K available (18432K kernel code, 2315K rwdata, 5272K rodata, 3412K init, 2288K bss, 45736K reserved, 0K cma-reserved) [ 0.009964] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.009971] Kernel/User page tables isolation: enabled [ 0.009991] ftrace: allocating 51529 entries in 202 pages [ 0.019274] ftrace: allocated 202 pages with 4 groups [ 0.019332] Dynamic Preempt: full [ 0.019740] rcu: Preemptible hierarchical RCU implementation. [ 0.019741] rcu: RCU event tracing is enabled. [ 0.019741] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.019743] All grace periods are expedited (rcu_expedited). [ 0.019743] Trampoline variant of Tasks RCU enabled. [ 0.019744] Rude variant of Tasks RCU enabled. [ 0.019744] Tracing variant of Tasks RCU enabled. [ 0.019745] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.019746] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.023298] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.023480] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.023574] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.026752] Console: colour VGA+ 80x25 [ 0.026784] printk: console [ttyS0] enabled [ 0.105288] ACPI: Core revision 20230628 [ 0.105844] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.106965] APIC: Switch to symmetric I/O mode setup [ 0.107680] x2apic enabled [ 0.108217] APIC: Switched APIC routing to: physical x2apic [ 0.109461] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.110167] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns [ 0.111354] Calibrating delay loop (skipped) preset value.. 5199.97 BogoMIPS (lpj=2599988) [ 0.112448] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.113356] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.114022] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.114358] Spectre V2 : Mitigation: Retpolines [ 0.115356] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.116356] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.117108] Speculative Store Bypass: Vulnerable [ 0.117357] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.118356] MMIO Stale Data: Unknown: No mitigations [ 0.118895] SRBDS: Unknown: Dependent on hypervisor status [ 0.119365] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.120356] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.121041] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.121356] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.122356] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.144287] Freeing SMP alternatives memory: 52K [ 0.144357] pid_max: default: 32768 minimum: 301 [ 0.145380] LSM: initializing lsm=capability,landlock,integrity [ 0.146035] landlock: Up and running. [ 0.146386] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.147358] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.148582] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.149511] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.150332] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.150373] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.151260] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.151372] signal: max sigframe size: 1776 [ 0.151914] rcu: Hierarchical SRCU implementation. [ 0.152357] rcu: Max phase no-delay instances is 400. [ 0.153144] smp: Bringing up secondary CPUs ... [ 0.153448] smpboot: x86: Booting SMP configuration: [ 0.154028] .... node #0, CPUs: #1 #2 #3 [ 0.154398] smp: Brought up 1 node, 4 CPUs [ 0.155809] smpboot: Max logical packages: 1 [ 0.156275] smpboot: Total of 4 processors activated (20799.90 BogoMIPS) [ 0.156601] devtmpfs: initialized [ 0.156919] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.158359] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.159389] pinctrl core: initialized pinctrl subsystem [ 0.160628] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.161424] thermal_sys: Registered thermal governor 'step_wise' [ 0.161426] thermal_sys: Registered thermal governor 'user_space' [ 0.162135] cpuidle: using governor menu [ 0.162895] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.163363] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.164199] PCI: Using configuration type 1 for base access [ 0.164498] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.182356] raid6: sse2x4 gen() 16038 MB/s [ 0.199357] raid6: sse2x2 gen() 15361 MB/s [ 0.216358] raid6: sse2x1 gen() 11884 MB/s [ 0.216904] raid6: using algorithm sse2x4 gen() 16038 MB/s [ 0.234356] raid6: .... xor() 7697 MB/s, rmw enabled [ 0.234954] raid6: using ssse3x2 recovery algorithm [ 0.235434] ACPI: Added _OSI(Module Device) [ 0.235941] ACPI: Added _OSI(Processor Device) [ 0.236357] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.236920] ACPI: Added _OSI(Processor Aggregator Device) [ 0.238097] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.239383] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.240152] ACPI: Interpreter enabled [ 0.240369] ACPI: PM: (supports S0 S3 S5) [ 0.240823] ACPI: Using IOAPIC for interrupt routing [ 0.241379] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.242357] PCI: Using E820 reservations for host bridge windows [ 0.243088] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.244820] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.245362] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.246393] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.247164] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.247417] PCI host bridge to bus 0000:00 [ 0.247932] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.248357] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.249157] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.249358] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.250220] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.250358] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.251206] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.251408] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.252455] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.254032] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.255357] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.259086] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.260357] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.261763] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.263328] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.264348] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.266918] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.269723] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.272366] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.276365] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.279372] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.283363] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.284252] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.284782] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.287359] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.289943] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.295360] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.299112] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.301052] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.302224] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.304357] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.305642] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.307888] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.309243] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.309748] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.313504] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.314466] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.315519] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.318676] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.319998] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.321596] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.323667] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.325262] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.325417] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.326178] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.326411] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.327159] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.327415] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.328162] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.328416] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.329385] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.330128] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.330367] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.331063] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.331365] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.332063] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.332365] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.333095] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.333690] iommu: Default domain type: Translated [ 0.334254] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.334424] SCSI subsystem initialized [ 0.334885] ACPI: bus type USB registered [ 0.335379] usbcore: registered new interface driver usbfs [ 0.336065] usbcore: registered new interface driver hub [ 0.336366] usbcore: registered new device driver usb [ 0.336975] pps_core: LinuxPPS API ver. 1 registered [ 0.337357] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.338360] PTP clock support registered [ 0.338856] Bluetooth: Core ver 2.22 [ 0.339365] NET: Registered PF_BLUETOOTH protocol family [ 0.339978] Bluetooth: HCI device and connection manager initialized [ 0.340358] Bluetooth: HCI socket layer initialized [ 0.340917] Bluetooth: L2CAP socket layer initialized [ 0.341361] Bluetooth: SCO socket layer initialized [ 0.341954] PCI: Using ACPI for IRQ routing [ 0.374044] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.374354] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.374354] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.374362] vgaarb: loaded [ 0.374717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.375318] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.378418] clocksource: Switched to clocksource kvm-clock [ 0.379532] pnp: PnP ACPI init [ 0.380058] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.381063] pnp: PnP ACPI: found 5 devices [ 0.388062] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.389152] NET: Registered PF_INET protocol family [ 0.389754] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.390783] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.391757] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.394459] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.395357] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.396223] TCP: Hash tables configured (established 4096 bind 4096) [ 0.396988] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.397743] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.398605] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.399520] RPC: Registered named UNIX socket transport module. [ 0.400217] RPC: Registered udp transport module. [ 0.400761] RPC: Registered tcp transport module. [ 0.401301] RPC: Registered tcp-with-tls transport module. [ 0.401933] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.402691] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.403395] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.404103] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.404895] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.405693] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.406557] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.407630] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.408845] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.410001] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.411153] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.412295] PCI: CLS 0 bytes, default 64 [ 0.412931] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.413930] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns [ 0.416202] Initialise system trusted keyrings [ 0.417554] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.418506] NFS: Registering the id_resolver key type [ 0.419110] Key type id_resolver registered [ 0.419591] Key type id_legacy registered [ 0.420364] Key type cifs.idmap registered [ 0.433376] xor: automatically using best checksumming function avx [ 0.434229] Key type asymmetric registered [ 0.434730] Asymmetric key parser 'x509' registered [ 0.435304] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.436154] io scheduler mq-deadline registered [ 0.436670] io scheduler kyber registered [ 0.437143] io scheduler bfq registered [ 0.437899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.441935] ACPI: button: Power Button [PWRF] [ 0.443014] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.444502] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.445892] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.449502] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.461661] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.462548] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.463573] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.468850] Linux agpgart interface v0.103 [ 0.469436] ACPI: bus type drm_connector registered [ 0.470106] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.470771] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.472881] Console: switching to colour dummy device 80x25 [ 0.473635] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.473637] [drm] features: -context_init [ 0.475272] [drm] number of scanouts: 1 [ 0.475736] [drm] number of cap sets: 0 [ 0.476602] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.480948] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.492600] Console: switching to colour frame buffer device 160x50 [ 0.511565] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.514707] brd: module loaded [ 0.516044] loop: module loaded [ 0.516551] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.518137] virtio_blk virtio3: [vda] 812858 512-byte logical blocks (416 MB/397 MiB) [ 0.536924] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.537888] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.539295] scsi host0: ahci [ 0.539850] scsi host1: ahci [ 0.540374] scsi host2: ahci [ 0.540917] scsi host3: ahci [ 0.541429] scsi host4: ahci [ 0.541957] scsi host5: ahci [ 0.542366] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.543207] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.544048] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.544886] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.545729] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.546578] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.558002] e100: Intel(R) PRO/100 Network Driver [ 0.558633] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.559282] e1000: Intel(R) PRO/1000 Network Driver [ 0.559845] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.560515] e1000e: Intel(R) PRO/1000 Network Driver [ 0.561092] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.561768] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.562398] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.564187] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.564806] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.565726] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.566620] hub 1-0:1.0: USB hub found [ 0.567080] hub 1-0:1.0: 2 ports detected [ 0.567772] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.568776] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.569791] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.576936] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.577803] hub 2-0:1.0: USB hub found [ 0.578276] hub 2-0:1.0: 6 ports detected [ 0.599991] hub 1-0:1.0: USB hub found [ 0.600464] hub 1-0:1.0: 2 ports detected [ 0.601034] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.601670] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.602621] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.603504] hub 3-0:1.0: USB hub found [ 0.603958] hub 3-0:1.0: 2 ports detected [ 0.605156] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.605764] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.606698] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.607610] hub 4-0:1.0: USB hub found [ 0.608059] hub 4-0:1.0: 2 ports detected [ 0.608669] usbcore: registered new interface driver usb-storage [ 0.609379] usbcore: registered new interface driver usbserial_generic [ 0.610124] usbserial: USB Serial support registered for generic [ 0.610826] usbcore: registered new interface driver ftdi_sio [ 0.611563] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.612421] usbcore: registered new interface driver pl2303 [ 0.613072] usbserial: USB Serial support registered for pl2303 [ 0.613773] i8042: PNP: No PS/2 controller found. [ 0.614371] mousedev: PS/2 mouse device common for all mice [ 0.615115] rtc_cmos 00:03: RTC can wake from S4 [ 0.615976] rtc_cmos 00:03: registered as rtc0 [ 0.616542] rtc_cmos 00:03: setting system clock to 2024-05-31T04:41:09 UTC (1717130469) [ 0.617503] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.618584] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.618699] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.619682] intel_pstate: CPU model not supported [ 0.620369] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.620848] sdhci: Secure Digital Host Controller Interface driver [ 0.621503] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.622214] sdhci: Copyright(c) Pierre Ossman [ 0.623616] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.624336] usbcore: registered new interface driver usbhid [ 0.625091] usbhid: USB HID core driver [ 0.625536] u32 classifier [ 0.625857] input device check on [ 0.626277] Actions configured [ 0.626756] NET: Registered PF_INET6 protocol family [ 0.627685] Segment Routing with IPv6 [ 0.628133] In-situ OAM (IOAM) with IPv6 [ 0.628603] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.629396] NET: Registered PF_PACKET protocol family [ 0.630043] Bridge firewalling registered [ 0.630545] Key type dns_resolver registered [ 0.631099] NET: Registered PF_VSOCK protocol family [ 0.632031] IPI shorthand broadcast: enabled [ 0.633950] sched_clock: Marking stable (549023252, 84868508)->(743317957, -109426197) [ 0.635014] registered taskstats version 1 [ 0.635526] Loading compiled-in X.509 certificates [ 0.637473] Key type .fscrypt registered [ 0.637956] Key type fscrypt-provisioning registered [ 0.638822] Btrfs loaded, zoned=no, fsverity=no [ 0.639741] Key type encrypted registered [ 0.640352] printk: console [netcon0] enabled [ 0.640853] netconsole: network logging started [ 0.813932] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.866292] ata2: SATA link down (SStatus 0 SControl 300) [ 0.867161] ata4: SATA link down (SStatus 0 SControl 300) [ 0.867898] ata6: SATA link down (SStatus 0 SControl 300) [ 0.868627] ata5: SATA link down (SStatus 0 SControl 300) [ 0.869358] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.870212] ata1: SATA link down (SStatus 0 SControl 300) [ 0.870882] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.871536] ata3.00: applying bridge limits [ 0.872111] ata3.00: configured for UDMA/100 [ 0.872935] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.897371] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.898333] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.921942] IP-Config: Complete: [ 0.922565] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 0.923713] host=192.168.7.2, domain=, nis-domain=(none) [ 0.924378] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.924380] nameserver0=8.8.8.8 [ 0.925720] clk: Disabling unused clocks [ 0.926405] md: Waiting for all devices to be available before autodetect [ 0.927016] md: If you don't use raid, use raid=noautodetect [ 0.927517] md: Autodetecting RAID arrays. [ 0.927884] md: autorun ... [ 0.928140] md: ... autorun DONE. [ 0.933071] EXT4-fs (vda): mounted filesystem a6aafaea-a53f-46a7-8898-948decc7d944 r/w with ordered data mode. Quota mode: disabled. [ 0.934703] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.935661] devtmpfs: mounted [ 0.937763] Freeing unused kernel image (initmem) memory: 3412K [ 0.938660] Write protecting the kernel read-only data: 24576k [ 0.939846] Freeing unused kernel image (rodata/data gap) memory: 872K [ 0.940477] Run /sbin/init as init process INIT: version 3.04 booting [ 0.951877] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 0.953101] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.001641] udevd[138]: starting version 3.2.14 [ 1.006685] udevd[139]: starting eudev-3.2.14 [ 1.069910] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.202994] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.256218] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.322949] EXT4-fs (vda): re-mounted a6aafaea-a53f-46a7-8898-948decc7d944 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.124  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 340, uid: 1000, gid: 1000) 00:00:00.124  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.124  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCQGsiZbK+PLcYWBzw1m6faL4twxsYw9ZNDfDy347SDuvvGEBIhyKCPogwPgjIAN6Wy89Tcc999v/uYTY3saieigqkA7BFGsbE5aZ4Rd2wEFM1pBQBHgnRsU3nCzWEQflhyHiXtj5aXIHfHZxOx2cBJ/nEBi8CX1/FzZ1K04k/OaWQnpRRzn22YE9zqJdKQD4Zo8LeVib/tBhTx+R8+uhR0gs9Gt5/aOiO5bKVGorq4u5NT3EIpN85p0hut98UJcTnvzA1qbybN3xYUTesvXJVp6IcDmxzPgmeqbAaV3mXH9UwhKtEDAUo5gV/GfDtK1Xa5r0mPB6DD7UK75WUsObMX root@qemux86-64 Fingerprint: SHA256:wGpB1m64nLJNGHVhjotfC7skYhcE0YL7m9FVGhpeCdI dropbear. Starting rpcbind daemon...[ 1.737333] weston[340]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done [ 1.760690] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.761633] Bluetooth: BNEP filters: protocol multicast * Starting Avahi mDNS/DNS-SD Daemon: avahi-daem[ 1.763590] Bluetooth: BNEP socket layer initialized on ...done. Starting Telephony daemon could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' Poky (Yocto Project Reference Distro) 5.0+snapshot-99ff46cc9bb12619af55c892452cee3b90a545f0 qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:19.500  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5941, uid: 0, gid: 0) 00:01:19.502  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:19.503  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy