t set auxiliary control register IBE bit, system vulnerable [ 0.036455] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.036581] pid_max: default: 32768 minimum: 301 [ 0.038776] LSM: initializing lsm=capability,landlock,integrity [ 0.039538] landlock: Up and running. [ 0.043165] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.043236] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.094578] /cpus/cpu@0 missing clock-frequency property [ 0.095923] /cpus/cpu@1 missing clock-frequency property [ 0.096045] /cpus/cpu@2 missing clock-frequency property [ 0.096157] /cpus/cpu@3 missing clock-frequency property [ 0.096490] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.139884] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.145615] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.146871] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.149384] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.155179] rcu: Hierarchical SRCU implementation. [ 0.155353] rcu: Max phase no-delay instances is 1000. [ 0.177254] smp: Bringing up secondary CPUs ... [ 0.191090] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.191308] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.207460] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.207638] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.214897] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.215054] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.216276] smp: Brought up 1 node, 4 CPUs [ 0.216466] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.216615] CPU: All CPU(s) started in SVC mode. [ 0.250516] devtmpfs: initialized [ 0.284217] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.329797] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.331151] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.360791] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.367035] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.394681] cpuidle: using governor ladder [ 0.398650] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.398867] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.401517] Serial: AMBA PL011 UART driver [ 0.453029] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.455034] printk: console [ttyAMA0] enabled [ 0.489427] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.499708] cryptd: max_cpu_qlen set to 1000 [ 0.687889] raid6: neonx8 gen() 400 MB/s [ 0.860779] raid6: neonx4 gen() 1442 MB/s [ 1.032957] raid6: neonx2 gen() 1580 MB/s [ 1.236846] raid6: neonx1 gen() 878 MB/s [ 1.410310] raid6: int32x8 gen() 35 MB/s [ 1.583575] raid6: int32x4 gen() 124 MB/s [ 1.756032] raid6: int32x2 gen() 427 MB/s [ 1.928861] raid6: int32x1 gen() 433 MB/s [ 1.929388] raid6: using algorithm neonx2 gen() 1580 MB/s [ 2.103837] raid6: .... xor() 556 MB/s, rmw enabled [ 2.105286] raid6: using neon recovery algorithm [ 2.119879] SCSI subsystem initialized [ 2.122237] usbcore: registered new interface driver usbfs [ 2.123418] usbcore: registered new interface driver hub [ 2.124671] usbcore: registered new device driver usb [ 2.126310] pps_core: LinuxPPS API ver. 1 registered [ 2.127379] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.128229] PTP clock support registered [ 2.166038] vgaarb: loaded [ 2.178761] clocksource: Switched to clocksource arch_sys_counter [ 2.261376] NET: Registered PF_INET protocol family [ 2.263614] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.281718] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.283025] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.284062] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.285374] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.287134] TCP: Hash tables configured (established 4096 bind 4096) [ 2.290823] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.291696] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.295983] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.304920] RPC: Registered named UNIX socket transport module. [ 2.305782] RPC: Registered udp transport module. [ 2.306758] RPC: Registered tcp transport module. [ 2.307332] RPC: Registered tcp-with-tls transport module. [ 2.307980] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.308995] PCI: CLS 0 bytes, default 64 [ 2.331913] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.340238] NFS: Registering the id_resolver key type [ 2.343672] Key type id_resolver registered [ 2.344386] Key type id_legacy registered [ 2.352486] Key type cifs.idmap registered [ 2.617685] xor: measuring software checksum speed [ 2.639372] arm4regs : 492 MB/sec [ 2.660072] 8regs : 599 MB/sec [ 2.678103] 32regs : 707 MB/sec [ 2.697976] neon : 701 MB/sec [ 2.698694] xor: using function: 32regs (707 MB/sec) [ 2.699222] async_tx: api initialized (async) [ 2.700533] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.701630] io scheduler mq-deadline registered [ 2.702259] io scheduler kyber registered [ 2.711229] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 2.713945] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 2.716198] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 2.720372] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 2.725477] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 2.727933] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.728767] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.729523] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 2.733685] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 2.743882] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 2.745442] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 2.746248] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.748127] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.754957] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 2.755873] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.760001] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 2.760958] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.761757] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.767462] PCI: bus0: Fast back to back transfers disabled [ 2.772490] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 2.774263] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 2.775695] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 2.777871] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 2.778737] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 2.779712] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 2.783286] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 2.808857] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 2.816215] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 2.941690] printk: console [hvc0] enabled [ 2.946872] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 2.948837] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.000552] [drm] features: -context_init [ 3.008541] [drm] number of scanouts: 1 [ 3.012878] [drm] number of cap sets: 0 [ 3.044063] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 3.187792] Console: switching to colour frame buffer device 160x50 [ 3.231102] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.300596] brd: module loaded [ 3.302167] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 3.310027] virtio_blk virtio1: [vda] 892344 512-byte logical blocks (457 MB/436 MiB) [ 3.346641] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 3.348444] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 3.354614] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 3.361922] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 3.362749] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.363793] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 3.377521] hub 1-0:1.0: USB hub found [ 3.379509] hub 1-0:1.0: 4 ports detected [ 3.389215] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.394141] hub 2-0:1.0: USB hub found [ 3.395439] hub 2-0:1.0: 4 ports detected [ 3.409273] rtc-pl031 9010000.pl031: registered as rtc0 [ 3.411494] rtc-pl031 9010000.pl031: setting system clock to 2024-06-01T21:47:50 UTC (1717278470) [ 3.418202] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.424780] usbcore: registered new interface driver usbhid [ 3.425549] usbhid: USB HID core driver [ 3.427240] u32 classifier [ 3.427691] input device check on [ 3.428323] Actions configured [ 3.432732] NET: Registered PF_INET6 protocol family [ 3.447934] Segment Routing with IPv6 [ 3.449030] In-situ OAM (IOAM) with IPv6 [ 3.450892] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.459205] NET: Registered PF_PACKET protocol family [ 3.462332] Bridge firewalling registered [ 3.465967] Key type dns_resolver registered [ 3.469827] NET: Registered PF_VSOCK protocol family [ 3.474656] Registering SWP/SWPB emulation handler [ 3.575888] registered taskstats version 1 [ 3.667893] Key type .fscrypt registered [ 3.669104] Key type fscrypt-provisioning registered [ 3.687891] Btrfs loaded, zoned=no, fsverity=no [ 3.695376] Key type encrypted registered [ 3.698592] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 3.704752] printk: console [netcon0] enabled [ 3.707734] netconsole: network logging started [ 3.814489] IP-Config: Complete: [ 3.815311] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 3.817484] host=192.168.7.6, domain=, nis-domain=(none) [ 3.818372] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.818465] nameserver0=8.8.8.8 [ 3.824598] clk: Disabling unused clocks [ 3.833453] md: Waiting for all devices to be available before autodetect [ 3.834595] md: If you don't use raid, use raid=noautodetect [ 3.835434] md: Autodetecting RAID arrays. [ 3.836081] md: autorun ... [ 3.836978] md: ... autorun DONE. [ 3.936919] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.941024] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 3.942931] EXT4-fs (vda): mounted filesystem 37d6fd6a-8806-4996-a7d6-c9d70e9d8b7f r/w with ordered data mode. Quota mode: disabled. [ 3.947469] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.952979] devtmpfs: mounted [ 4.136994] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 4.222140] Freeing unused kernel image (initmem) memory: 2048K [ 4.499068] Run /sbin/init as init process [ 4.649903] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 4.737619] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 10.304931] udevd[130]: starting version 3.2.14 [ 10.709146] udevd[131]: starting eudev-3.2.14 [ 30.251732] EXT4-fs (vda): re-mounted 37d6fd6a-8806-4996-a7d6-c9d70e9d8b7f r/w. Quota mode: disabled. [ 33.212977] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.32-yocto-standard #1 SMP PREEMPT Tue May 28 17:31:17 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 1 21:48:39 2024 dropbear. (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-ab7ab11059e7a619d98ee19b0d3621224b60b1e9 qemuarm /dev/hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-iE70jsBazO,guid=302f51f03478987f4da486c5665b973a Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[563]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=544 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[563]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:579): Gtk-WARNING **: 21:48:52.276: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:579): WARNING **: 21:48:52.287: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format [ 621.014567] hrtimer: interrupt took 97479120 ns