vernor ladder
[    0.262779] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.262964] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.265295] Serial: AMBA PL011 UART driver
[    0.315478] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.317508] printk: console [ttyAMA0] enabled
[    0.346119] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.364138] cryptd: max_cpu_qlen set to 1000
[    0.545819] raid6: neonx8   gen()   643 MB/s
[    0.718554] raid6: neonx4   gen()  1597 MB/s
[    0.890977] raid6: neonx2   gen()  1503 MB/s
[    1.063801] raid6: neonx1   gen()   997 MB/s
[    1.238077] raid6: int32x8  gen()    64 MB/s
[    1.410128] raid6: int32x4  gen()   137 MB/s
[    1.581901] raid6: int32x2  gen()   374 MB/s
[    1.754547] raid6: int32x1  gen()   402 MB/s
[    1.754987] raid6: using algorithm neonx4 gen() 1597 MB/s
[    1.927372] raid6: .... xor() 590 MB/s, rmw enabled
[    1.927858] raid6: using neon recovery algorithm
[    1.935182] SCSI subsystem initialized
[    1.936934] usbcore: registered new interface driver usbfs
[    1.937881] usbcore: registered new interface driver hub
[    1.938646] usbcore: registered new device driver usb
[    1.939587] pps_core: LinuxPPS API ver. 1 registered
[    1.939738] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.940232] PTP clock support registered
[    1.962172] vgaarb: loaded
[    1.971456] clocksource: Switched to clocksource arch_sys_counter
[    2.028815] NET: Registered PF_INET protocol family
[    2.031724] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.043053] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.043678] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.044226] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    2.044976] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.045958] TCP: Hash tables configured (established 8192 bind 8192)
[    2.047867] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.048340] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.051147] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.056616] RPC: Registered named UNIX socket transport module.
[    2.056829] RPC: Registered udp transport module.
[    2.056966] RPC: Registered tcp transport module.
[    2.057096] RPC: Registered tcp-with-tls transport module.
[    2.057237] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.057575] PCI: CLS 0 bytes, default 64
[    2.071226] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    2.078089] NFS: Registering the id_resolver key type
[    2.080160] Key type id_resolver registered
[    2.080485] Key type id_legacy registered
[    2.087380] Key type cifs.idmap registered
[    2.298622] xor: measuring software checksum speed
[    2.310716]    arm4regs        :   889 MB/sec
[    2.322457]    8regs           :  1111 MB/sec
[    2.332482]    32regs          :  1052 MB/sec
[    2.342989]    neon            :  1157 MB/sec
[    2.343331] xor: using function: neon (1157 MB/sec)
[    2.343688] async_tx: api initialized (async)
[    2.344688] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.345277] io scheduler mq-deadline registered
[    2.345697] io scheduler kyber registered
[    2.350787] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.352196] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.353446] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.355062] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.357927] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.358601] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.359219] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.359709] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.361777] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    2.366714] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    2.367284] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    2.367530] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.367780] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.368981] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    2.369488] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    2.371009] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    2.371232] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.371430] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.373889] PCI: bus0: Fast back to back transfers disabled
[    2.376010] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    2.376536] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    2.376850] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    2.377103] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    2.377294] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff]
[    2.377836] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    2.379983] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.402190] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.406268] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.504988] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.506140] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.506188] [drm] features: -context_init
[    2.507610] printk: console [hvc0] enabled
[    2.509455] [drm] number of scanouts: 1
[    2.525586] [drm] number of cap sets: 0
[    2.541958] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    2.640553] Console: switching to colour frame buffer device 160x50
[    2.654650] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.738325] brd: module loaded
[    2.740722] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.751973] virtio_blk virtio1: [vda] 4890292 512-byte logical blocks (2.50 GB/2.33 GiB)
[    2.787862] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.790521] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.796307] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.803382] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.804087] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.804981] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.822095] hub 1-0:1.0: USB hub found
[    2.823871] hub 1-0:1.0: 4 ports detected
[    2.830728] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.834456] hub 2-0:1.0: USB hub found
[    2.835316] hub 2-0:1.0: 4 ports detected
[    2.846281] rtc-pl031 9010000.pl031: registered as rtc0
[    2.847992] rtc-pl031 9010000.pl031: setting system clock to 2024-06-02T10:23:06 UTC (1717323786)
[    2.855609] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.861600] usbcore: registered new interface driver usbhid
[    2.862273] usbhid: USB HID core driver
[    2.863511] u32 classifier
[    2.863911]     input device check on
[    2.864327]     Actions configured
[    2.868046] NET: Registered PF_INET6 protocol family
[    2.881518] Segment Routing with IPv6
[    2.882468] In-situ OAM (IOAM) with IPv6
[    2.884065] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.888954] NET: Registered PF_PACKET protocol family
[    2.890722] Bridge firewalling registered
[    2.892519] Key type dns_resolver registered
[    2.893878] NET: Registered PF_VSOCK protocol family
[    2.896065] Registering SWP/SWPB emulation handler
[    2.967904] registered taskstats version 1
[    3.004451] Key type .fscrypt registered
[    3.005208] Key type fscrypt-provisioning registered
[    3.014745] Btrfs loaded, zoned=no, fsverity=no
[    3.017962] Key type encrypted registered
[    3.025883] printk: console [netcon0] enabled
[    3.026592] netconsole: network logging started
[    3.099817] IP-Config: Complete:
[    3.100466]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    3.101586]      host=192.168.7.4, domain=, nis-domain=(none)
[    3.102222]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.102302]      nameserver0=8.8.8.8
[    3.107227] clk: Disabling unused clocks
[    3.109939] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.114575] md: Waiting for all devices to be available before autodetect
[    3.115387] md: If you don't use raid, use raid=noautodetect
[    3.116068] md: Autodetecting RAID arrays.
[    3.116599] md: autorun ...
[    3.116997] md: ... autorun DONE.
[    3.258177] EXT4-fs (vda): mounted filesystem 1a230fb5-4cd9-4afa-82b9-4069184ff49e r/w with ordered data mode. Quota mode: disabled.
[    3.261837] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.266401] devtmpfs: mounted
[    3.374792] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.378920] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    3.502145] Freeing unused kernel image (initmem) memory: 2048K
[    3.632332] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    3.633353] Run /sbin/init as init process
[    3.818137] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
INIT: version 3.04 booting
[    3.890543] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    6.500447] udevd[130]: starting version 3.2.14
[    6.625701] udevd[131]: starting eudev-3.2.14
[   11.721359] EXT4-fs (vda): re-mounted 1a230fb5-4cd9-4afa-82b9-4069184ff49e r/w. Quota mode: disabled.
[   12.498461] uart-pl011 9000000.pl011: no DMA platform data
[   16.021967] hrtimer: interrupt took 41884496 ns
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.6.32-yocto-standard #1 SMP PREEMPT Tue May 28 17:31:17 UTC 2024 armv7l
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun  2 10:23:47 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: OK
D-BUS per-session daemon address is: unix:path=/tmp/dbus-wJp3n6sgsZ,guid=ad376399c280d5ca0ff3ed6c665c483a
Starting tcf-agent: OK
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 5.0+snapshot-a40150ce8ac7246f810331be1072fcbc77503ed0 qemuarm hvc0

qemuarm login: matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[616]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=598 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[616]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:636): Gtk-[1;33mWARNING[0m **: [34m10:24:06.900[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:636): [1;33mWARNING[0m **: [34m10:24:06.910[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
[ 2181.108911] hellomod: loading out-of-tree module taints kernel.
[ 2181.155107] Hello world!
[ 2190.179863] Cleaning up hellomod.
