[ 0.000000] Linux version 6.6.32-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240513) #1 SMP PREEMPT Tue May 28 17:31:19 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238912K/262140K available (14552K kernel code, 1472K rwdata, 2764K rodata, 400K init, 395K bss, 23228K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.00 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945194357 ns [ 0.000444] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421566972ns [ 0.026505] Console: colour dummy device 80x25 [ 0.028691] printk: console [tty0] enabled [ 0.030420] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.32-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240513) #1 SMP PREEMPT Tue May 28 17:31:19 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238912K/262140K available (14552K kernel code, 1472K rwdata, 2764K rodata, 400K init, 395K bss, 23228K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.00 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945194357 ns [ 0.000444] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421566972ns [ 0.026505] Console: colour dummy device 80x25 [ 0.028691] printk: console [tty0] enabled [ 0.030420] printk: bootconsole [uart8250] disabled [ 0.035721] Calibrating delay loop... 806.91 BogoMIPS (lpj=4034560) [ 0.070968] pid_max: default: 32768 minimum: 301 [ 0.074198] LSM: initializing lsm=capability,landlock,integrity [ 0.075686] landlock: Up and running. [ 0.082134] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.082642] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.162412] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.163735] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.164433] Performance counters: No available PMU. [ 0.165885] rcu: Hierarchical SRCU implementation. [ 0.165985] rcu: Max phase no-delay instances is 1000. [ 0.176828] smp: Bringing up secondary CPUs ... [ 0.177357] smp: Brought up 1 node, 1 CPU [ 0.194976] devtmpfs: initialized [ 0.204989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.205727] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.217626] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.625554] raid6: int32x8 gen() 164 MB/s [ 0.966724] raid6: int32x4 gen() 334 MB/s [ 1.326899] raid6: int32x2 gen() 438 MB/s [ 1.678448] raid6: int32x1 gen() 354 MB/s [ 1.678761] raid6: using algorithm int32x2 gen() 438 MB/s [ 2.030680] raid6: .... xor() 257 MB/s, rmw enabled [ 2.031075] raid6: using intx1 recovery algorithm [ 2.037523] SCSI subsystem initialized [ 2.038835] usbcore: registered new interface driver usbfs [ 2.039474] usbcore: registered new interface driver hub [ 2.039979] usbcore: registered new device driver usb [ 2.051588] pps_core: LinuxPPS API ver. 1 registered [ 2.051812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.052197] PTP clock support registered [ 2.130441] PCI host bridge to bus 0000:00 [ 2.131301] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.132528] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.132860] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.136501] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.138196] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.138552] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.138875] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.139068] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.139268] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.139468] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.156295] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.158396] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.159151] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.159487] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.159649] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.159843] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.160000] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.161048] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.161405] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.162941] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.174759] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.175247] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.175679] pci 0000:00:0a.3: quirk_piix4_acpi+0x0/0x188 took 19531 usecs [ 2.177567] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.177801] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.178123] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.178344] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.179530] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.179786] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.180089] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.180390] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.181373] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.181600] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.181840] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.182834] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.183071] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.183312] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.195702] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.198733] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.199509] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.199772] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.199981] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.200319] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.200520] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.200758] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.201000] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.201161] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.201288] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.201428] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.201592] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.217225] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.217607] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.217821] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.218084] vgaarb: loaded [ 2.226086] clocksource: Switched to clocksource MIPS [ 2.659689] NET: Registered PF_INET protocol family [ 2.662725] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.679652] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.680146] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.680460] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.680942] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.681316] TCP: Hash tables configured (established 2048 bind 2048) [ 2.684216] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.684839] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.688569] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.695324] RPC: Registered named UNIX socket transport module. [ 2.695674] RPC: Registered udp transport module. [ 2.695787] RPC: Registered tcp transport module. [ 2.695894] RPC: Registered tcp-with-tls transport module. [ 2.696012] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.697686] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.699697] PCI: CLS 0 bytes, default 16 [ 2.721146] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.729926] NFS: Registering the id_resolver key type [ 2.733186] Key type id_resolver registered [ 2.733446] Key type id_legacy registered [ 2.738192] Key type cifs.idmap registered [ 3.455378] xor: measuring software checksum speed [ 3.476208] 8regs : 520 MB/sec [ 3.496298] 8regs_prefetch : 533 MB/sec [ 3.515436] 32regs : 538 MB/sec [ 3.536157] 32regs_prefetch : 499 MB/sec [ 3.536520] xor: using function: 32regs (538 MB/sec) [ 3.537932] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.538401] io scheduler mq-deadline registered [ 3.538658] io scheduler kyber registered [ 3.553038] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 3.560824] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 3.564499] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 3.569705] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.587337] printk: console [ttyS0] disabled [ 3.623691] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.624029] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 3.627846] printk: console [ttyS0] enabled [ 3.792282] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.793650] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 3.794972] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.813076] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 3.817414] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.819988] [drm] Found bochs VGA, ID 0xb0c5. [ 3.820794] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.830371] [drm] Found EDID data blob. [ 3.845916] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 3.987671] Console: switching to colour frame buffer device 160x50 [ 4.020853] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 4.099610] brd: module loaded [ 4.102521] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 4.114988] virtio_blk virtio2: [vda] 1151460 512-byte logical blocks (590 MB/562 MiB) [ 4.187766] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 4.197414] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 4.201221] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 4.226307] hub 1-0:1.0: USB hub found [ 4.238353] hub 1-0:1.0: 2 ports detected [ 4.273094] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.275799] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.299819] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.318169] usbcore: registered new interface driver usbhid [ 4.319861] usbhid: USB HID core driver [ 4.326369] u32 classifier [ 4.327100] input device check on [ 4.327686] Actions configured [ 4.338498] NET: Registered PF_INET6 protocol family [ 4.412524] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.448369] Segment Routing with IPv6 [ 4.451250] In-situ OAM (IOAM) with IPv6 [ 4.460055] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.479090] NET: Registered PF_PACKET protocol family [ 4.487215] Bridge firewalling registered [ 4.492527] Key type dns_resolver registered [ 4.532054] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 4.557931] NET: Registered PF_VSOCK protocol family [ 4.660454] registered taskstats version 1 [ 4.728316] Key type .fscrypt registered [ 4.756711] Key type fscrypt-provisioning registered [ 4.809917] Btrfs loaded, zoned=no, fsverity=no [ 5.245232] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 5.279773] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 5.299472] Key type encrypted registered [ 5.332456] printk: console [netcon0] enabled [ 5.362736] netconsole: network logging started [ 5.422099] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 5.555045] IP-Config: Complete: [ 5.576456] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 5.612693] host=192.168.7.8, domain=, nis-domain=(none) [ 5.639149] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.639496] nameserver0=8.8.8.8 [ 5.698627] clk: Disabling unused clocks [ 5.743793] md: Waiting for all devices to be available before autodetect [ 5.772145] md: If you don't use raid, use raid=noautodetect [ 5.792083] md: Autodetecting RAID arrays. [ 5.820685] md: autorun ... [ 5.842041] md: ... autorun DONE. [ 6.014747] EXT4-fs (vda): mounted filesystem e905d575-1902-45be-8e59-fc35863683de r/w with ordered data mode. Quota mode: disabled. [ 6.045900] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.084529] devtmpfs: mounted [ 6.206419] Freeing unused kernel image (initmem) memory: 400K [ 6.232079] This architecture does not have kernel memory protection. [ 6.263560] Run /sbin/init as init process [ 6.360066] process '/sbin/init.sysvinit' started with executable stack [ 12.500360] udevd[94]: starting version 3.2.14 [ 12.745741] udevd[95]: starting eudev-3.2.14 [ 41.377352] EXT4-fs (vda): re-mounted e905d575-1902-45be-8e59-fc35863683de r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.32-yocto-standard #1 SMP PREEMPT Tue May 28 17:31:19 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 2 11:01:32 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-a40150ce8ac7246f810331be1072fcbc77503ed0 qemumips /dev/ttyS0 qemumips login: