[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000246] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000489] Switching to timer-based delay loop, resolution 16ns [ 0.026858] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.036124] Console: colour dummy device 80x30 [ 0.037862] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.038124] CPU: Testing write buffer coherency: ok [ 0.040551] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.040776] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.040898] pid_max: default: 32768 minimum: 301 [ 0.042943] LSM: initializing lsm=capability,landlock,integrity [ 0.043649] landlock: Up and running. [ 0.050740] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.050813] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.082800] /cpus/cpu@0 missing clock-frequency property [ 0.086584] /cpus/cpu@1 missing clock-frequency property [ 0.086669] /cpus/cpu@2 missing clock-frequency property [ 0.086747] /cpus/cpu@3 missing clock-frequency property [ 0.086949] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.100903] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.101954] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.102349] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.103555] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.104974] rcu: Hierarchical SRCU implementation. [ 0.105030] rcu: Max phase no-delay instances is 1000. [ 0.111693] smp: Bringing up secondary CPUs ... [ 0.123090] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.123321] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.137584] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.137790] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.142284] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.142358] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.143133] smp: Brought up 1 node, 4 CPUs [ 0.143262] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.143359] CPU: All CPU(s) started in SVC mode. [ 0.186035] devtmpfs: initialized [ 0.203860] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.269658] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.271877] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.313284] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.322155] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.339374] cpuidle: using governor ladder [ 0.347833] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.348358] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.356604] Serial: AMBA PL011 UART driver [ 0.481484] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.484773] printk: console [ttyAMA0] enabled [ 0.543170] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.563758] cryptd: max_cpu_qlen set to 1000 [ 0.734740] raid6: neonx8 gen() 506 MB/s [ 0.907066] raid6: neonx4 gen() 1082 MB/s [ 1.079908] raid6: neonx2 gen() 1102 MB/s [ 1.252691] raid6: neonx1 gen() 630 MB/s [ 1.425545] raid6: int32x8 gen() 71 MB/s [ 1.602115] raid6: int32x4 gen() 64 MB/s [ 1.785235] raid6: int32x2 gen() 154 MB/s [ 1.976734] raid6: int32x1 gen() 121 MB/s [ 1.977630] raid6: using algorithm neonx2 gen() 1102 MB/s [ 2.181762] raid6: .... xor() 441 MB/s, rmw enabled [ 2.183022] raid6: using neon recovery algorithm [ 2.198566] SCSI subsystem initialized [ 2.201907] usbcore: registered new interface driver usbfs [ 2.203893] usbcore: registered new interface driver hub [ 2.205110] usbcore: registered new device driver usb [ 2.207621] pps_core: LinuxPPS API ver. 1 registered [ 2.208042] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.208880] PTP clock support registered [ 2.254206] vgaarb: loaded [ 2.294261] clocksource: Switched to clocksource arch_sys_counter [ 2.443773] NET: Registered PF_INET protocol family [ 2.450631] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.482993] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.484224] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.484838] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.485667] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.486765] TCP: Hash tables configured (established 4096 bind 4096) [ 2.490361] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.496446] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.502037] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.526578] RPC: Registered named UNIX socket transport module. [ 2.527580] RPC: Registered udp transport module. [ 2.528148] RPC: Registered tcp transport module. [ 2.528422] RPC: Registered tcp-with-tls transport module. [ 2.528716] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.529343] PCI: CLS 0 bytes, default 64 [ 2.552591] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.568205] NFS: Registering the id_resolver key type [ 2.575985] Key type id_resolver registered [ 2.576464] Key type id_legacy registered [ 2.589467] Key type cifs.idmap registered [ 3.240658] xor: measuring software checksum speed [ 3.273483] arm4regs : 439 MB/sec [ 3.296827] 8regs : 580 MB/sec [ 3.325834] 32regs : 533 MB/sec [ 3.354281] neon : 706 MB/sec [ 3.355220] xor: using function: neon (706 MB/sec) [ 3.356120] async_tx: api initialized (async) [ 3.362467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.363825] io scheduler mq-deadline registered [ 3.364347] io scheduler kyber registered [ 3.390232] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 3.396656] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 3.399244] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 3.407597] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 3.419030] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 3.420073] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.420597] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.425752] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 3.434160] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 3.454152] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 3.456278] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 3.456842] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.457321] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.461079] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 3.467478] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.471268] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 3.472675] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.473163] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.484091] PCI: bus0: Fast back to back transfers disabled [ 3.489086] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 3.490772] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 3.496505] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 3.497331] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 3.497772] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 3.498189] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 3.502044] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 3.553669] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 3.565589] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 3.722346] printk: console [hvc0] enabled [ 3.724547] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 3.993086] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.993203] [drm] features: -context_init [ 4.008429] [drm] number of scanouts: 1 [ 4.010047] [drm] number of cap sets: 0 [ 4.065210] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 4.385989] Console: switching to colour frame buffer device 160x50 [ 4.507374] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.722533] brd: module loaded [ 4.726666] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 4.759335] virtio_blk virtio1: [vda] 892334 512-byte logical blocks (457 MB/436 MiB) [ 4.830308] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 4.837184] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 4.858373] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 4.900627] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 4.904620] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.910649] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 4.949661] hub 1-0:1.0: USB hub found [ 4.955098] hub 1-0:1.0: 4 ports detected [ 4.981962] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.998196] hub 2-0:1.0: USB hub found [ 5.001244] hub 2-0:1.0: 4 ports detected [ 5.040968] rtc-pl031 9010000.pl031: registered as rtc0 [ 5.048887] rtc-pl031 9010000.pl031: setting system clock to 2024-06-02T01:30:45 UTC (1717291845) [ 5.078944] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.101990] usbcore: registered new interface driver usbhid [ 5.106013] usbhid: USB HID core driver [ 5.108886] u32 classifier [ 5.116640] input device check on [ 5.118306] Actions configured [ 5.132378] NET: Registered PF_INET6 protocol family [ 5.185801] Segment Routing with IPv6 [ 5.187935] In-situ OAM (IOAM) with IPv6 [ 5.192482] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.214029] NET: Registered PF_PACKET protocol family [ 5.222455] Bridge firewalling registered [ 5.228979] Key type dns_resolver registered [ 5.237340] NET: Registered PF_VSOCK protocol family [ 5.243606] Registering SWP/SWPB emulation handler [ 5.293051] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 5.463533] registered taskstats version 1 [ 5.597946] Key type .fscrypt registered [ 5.599502] Key type fscrypt-provisioning registered [ 5.611949] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 5.631215] Btrfs loaded, zoned=no, fsverity=no [ 5.649324] Key type encrypted registered [ 5.666631] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 5.675645] printk: console [netcon0] enabled [ 5.677237] netconsole: network logging started [ 5.812954] IP-Config: Complete: [ 5.818049] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 5.822519] host=192.168.7.4, domain=, nis-domain=(none) [ 5.827538] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.827752] nameserver0=8.8.8.8 [ 5.846614] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 5.853260] clk: Disabling unused clocks [ 5.869419] md: Waiting for all devices to be available before autodetect [ 5.875894] md: If you don't use raid, use raid=noautodetect [ 5.882408] md: Autodetecting RAID arrays. [ 5.883867] md: autorun ... [ 5.886106] md: ... autorun DONE. [ 6.090203] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 6.185901] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 [ 6.231624] EXT4-fs (vda): mounted filesystem b3a75dd1-a8b9-4848-a01c-f320438a4a27 r/w with ordered data mode. Quota mode: disabled. [ 6.249937] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.266616] devtmpfs: mounted [ 6.797280] Freeing unused kernel image (initmem) memory: 2048K [ 7.556893] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 14.107993] udevd[130]: starting version 3.2.14 [ 14.245836] udevd[131]: starting eudev-3.2.14 [ 18.186046] EXT4-fs (vda): re-mounted b3a75dd1-a8b9-4848-a01c-f320438a4a27 r/w. Quota mode: disabled. [ 19.474454] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.32-yocto-standard #1 SMP PREEMPT Tue May 28 17:31:17 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 2 01:31:10 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon D-BUS per-session daemon address is: unix:path=/tmp/dbus-shjWsZdNAg,guid=0de926d4fb051c0581eecc8d665bcb61 Poky (Yocto Project Reference Distro) 5.0+snapshot-af6d28d2b0abdfcfa70edcc95abd99a3c1a64ac8 qemuarm /dev/hvc0 qemuarm login: Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dbus-daemon[562]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=545 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[562]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:583): Gtk-WARNING **: 01:31:22.535: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:583): WARNING **: 01:31:22.547: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format