[ 0.000000] Linux version 6.6.32-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240513) #1 SMP PREEMPT_DYNAMIC Tue May 28 17:31:12 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 572753746 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2599.996 MHz processor [ 0.001027] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001047] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001049] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.007441] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.007585] ACPI: Early table checksum verification disabled [ 0.007597] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS ) [ 0.007603] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.007609] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.007614] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.007618] ACPI: FACS 0x000000001FFE0000 000040 [ 0.007620] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.007623] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.007626] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.007630] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.007632] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.007633] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.007634] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.007635] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.007636] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.007636] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.007637] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.007676] Zone ranges: [ 0.007677] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007679] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.007680] Normal empty [ 0.007681] Movable zone start for each node [ 0.007682] Early memory node ranges [ 0.007682] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.007683] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.007684] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.008314] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008346] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.010643] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.011058] ACPI: PM-Timer IO Port: 0x608 [ 0.011066] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.011096] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.011099] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.011101] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.011102] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.011106] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.011107] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.011111] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.011112] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.011115] TSC deadline timer available [ 0.011116] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.011127] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.011145] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.011146] Booting paravirtualized kernel on KVM [ 0.011148] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.011151] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.011954] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.011977] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.012052] random: crng init done [ 0.012136] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.012182] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.012278] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.013057] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.014418] Memory: 477740K/523736K available (18432K kernel code, 2321K rwdata, 5280K rodata, 3424K init, 2268K bss, 45736K reserved, 0K cma-reserved) [ 0.014455] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.014463] Kernel/User page tables isolation: enabled [ 0.014489] ftrace: allocating 51575 entries in 202 pages [ 0.026706] ftrace: allocated 202 pages with 4 groups [ 0.026765] Dynamic Preempt: full [ 0.027429] rcu: Preemptible hierarchical RCU implementation. [ 0.027430] rcu: RCU event tracing is enabled. [ 0.027430] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.027431] All grace periods are expedited (rcu_expedited). [ 0.027432] Trampoline variant of Tasks RCU enabled. [ 0.027433] Rude variant of Tasks RCU enabled. [ 0.027433] Tracing variant of Tasks RCU enabled. [ 0.027434] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.027435] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.031332] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.031555] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.031663] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.036877] Console: colour VGA+ 80x25 [ 0.036917] printk: console [ttyS0] enabled [ 0.153667] ACPI: Core revision 20230628 [ 0.154475] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.156155] APIC: Switch to symmetric I/O mode setup [ 0.157264] x2apic enabled [ 0.158074] APIC: Switched APIC routing to: physical x2apic [ 0.160112] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.161253] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.163121] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.164243] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.165122] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.166124] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.167124] Spectre V2 : Mitigation: Retpolines [ 0.167901] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.168122] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.169122] Speculative Store Bypass: Vulnerable [ 0.170123] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.171122] MMIO Stale Data: Unknown: No mitigations [ 0.172122] SRBDS: Unknown: Dependent on hypervisor status [ 0.173133] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.174122] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.175122] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.176122] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.177122] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.201228] Freeing SMP alternatives memory: 52K [ 0.202100] pid_max: default: 32768 minimum: 301 [ 0.202148] LSM: initializing lsm=capability,landlock,integrity [ 0.203128] landlock: Up and running. [ 0.204155] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.205125] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.207405] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.208301] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.209144] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.210143] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.211162] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.212141] signal: max sigframe size: 1776 [ 0.212928] rcu: Hierarchical SRCU implementation. [ 0.213123] rcu: Max phase no-delay instances is 400. [ 0.214183] smp: Bringing up secondary CPUs ... [ 0.215023] smpboot: x86: Booting SMP configuration: [ 0.215127] .... node #0, CPUs: #1 #2 #3 [ 0.215529] smp: Brought up 1 node, 4 CPUs [ 0.216856] smpboot: Max logical packages: 1 [ 0.217125] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.218377] devtmpfs: initialized [ 0.219863] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.220125] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.221154] pinctrl core: initialized pinctrl subsystem [ 0.223068] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.223262] thermal_sys: Registered thermal governor 'step_wise' [ 0.223263] thermal_sys: Registered thermal governor 'user_space' [ 0.224135] cpuidle: using governor menu [ 0.225923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.226125] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.227132] PCI: Using configuration type 1 for base access [ 0.228231] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.246124] raid6: sse2x4 gen() 8068 MB/s [ 0.263124] raid6: sse2x2 gen() 7898 MB/s [ 0.281128] raid6: sse2x1 gen() 6162 MB/s [ 0.282123] raid6: using algorithm sse2x4 gen() 8068 MB/s [ 0.300122] raid6: .... xor() 4822 MB/s, rmw enabled [ 0.301124] raid6: using ssse3x2 recovery algorithm [ 0.302201] ACPI: Added _OSI(Module Device) [ 0.303106] ACPI: Added _OSI(Processor Device) [ 0.303124] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.304123] ACPI: Added _OSI(Processor Aggregator Device) [ 0.306421] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.308159] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.309291] ACPI: Interpreter enabled [ 0.310059] ACPI: PM: (supports S0 S3 S5) [ 0.310124] ACPI: Using IOAPIC for interrupt routing [ 0.311158] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.312124] PCI: Using E820 reservations for host bridge windows [ 0.313230] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.316696] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.317129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.318174] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.319226] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.320204] PCI host bridge to bus 0000:00 [ 0.321125] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.322124] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.323124] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.324124] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.325124] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.326124] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.327125] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.328176] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.329630] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.331124] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.333123] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.337035] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.338123] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.339722] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.341525] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.342972] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.345123] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.348224] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.350597] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.352582] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.354017] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.356135] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.357244] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.358795] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.360021] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.360922] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.363565] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.365641] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.368266] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.369858] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.371956] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.372876] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.374439] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.376248] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.377800] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.379878] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.380623] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.381344] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.385124] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.386594] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.387898] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.390411] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.392116] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.393190] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.394187] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.395201] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.396184] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.397191] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.398179] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.399181] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.400150] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.401131] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.402131] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.403131] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.404131] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.405130] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.406123] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.407130] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.408527] iommu: Default domain type: Translated [ 0.409124] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.410188] SCSI subsystem initialized [ 0.410872] ACPI: bus type USB registered [ 0.411150] usbcore: registered new interface driver usbfs [ 0.412074] usbcore: registered new interface driver hub [ 0.412131] usbcore: registered new device driver usb [ 0.413007] pps_core: LinuxPPS API ver. 1 registered [ 0.413123] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.414130] PTP clock support registered [ 0.415237] Bluetooth: Core ver 2.22 [ 0.415908] NET: Registered PF_BLUETOOTH protocol family [ 0.416123] Bluetooth: HCI device and connection manager initialized [ 0.417136] Bluetooth: HCI socket layer initialized [ 0.417983] Bluetooth: L2CAP socket layer initialized [ 0.418128] Bluetooth: SCO socket layer initialized [ 0.418992] PCI: Using ACPI for IRQ routing [ 0.474873] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.475120] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.475120] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.475124] vgaarb: loaded [ 0.475617] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.476123] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.481175] clocksource: Switched to clocksource kvm-clock [ 0.559938] pnp: PnP ACPI init [ 0.560771] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.562283] pnp: PnP ACPI: found 5 devices [ 0.569309] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.570782] NET: Registered PF_INET protocol family [ 0.571760] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.573296] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.574718] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.575993] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.577259] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.578429] TCP: Hash tables configured (established 4096 bind 4096) [ 0.579492] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.580517] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.581698] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.582887] RPC: Registered named UNIX socket transport module. [ 0.584761] RPC: Registered udp transport module. [ 0.585553] RPC: Registered tcp transport module. [ 0.586373] RPC: Registered tcp-with-tls transport module. [ 0.587266] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.588319] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.589337] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.590413] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.591562] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.592684] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.593775] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.595214] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.597023] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.598481] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.599826] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.601303] PCI: CLS 0 bytes, default 64 [ 0.602126] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.603619] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.712629] Initialise system trusted keyrings [ 0.713742] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.715087] NFS: Registering the id_resolver key type [ 0.716148] Key type id_resolver registered [ 0.716882] Key type id_legacy registered [ 0.718038] Key type cifs.idmap registered [ 0.737543] xor: automatically using best checksumming function avx [ 0.738696] Key type asymmetric registered [ 0.739330] Asymmetric key parser 'x509' registered [ 0.740140] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.741349] io scheduler mq-deadline registered [ 0.742062] io scheduler kyber registered [ 0.742759] io scheduler bfq registered [ 0.743708] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.745147] ACPI: button: Power Button [PWRF] [ 0.746399] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.748751] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.750791] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.754712] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.756552] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.757819] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.759368] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.761817] Linux agpgart interface v0.103 [ 0.762654] ACPI: bus type drm_connector registered [ 0.763603] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.765394] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.768789] Console: switching to colour dummy device 80x25 [ 0.769962] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.769964] [drm] features: -context_init [ 0.772288] [drm] number of scanouts: 1 [ 0.772972] [drm] number of cap sets: 0 [ 0.774040] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.779212] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.782064] Console: switching to colour frame buffer device 160x50 [ 0.807524] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.811276] brd: module loaded [ 0.813125] loop: module loaded [ 0.813869] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.816158] virtio_blk virtio3: [vda] 812868 512-byte logical blocks (416 MB/397 MiB) [ 0.819749] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.821227] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.823164] scsi host0: ahci [ 0.823957] scsi host1: ahci [ 0.824675] scsi host2: ahci [ 0.825402] scsi host3: ahci [ 0.826141] scsi host4: ahci [ 0.826857] scsi host5: ahci [ 0.827512] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.828745] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.829985] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.831216] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.832440] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.833811] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.836423] e100: Intel(R) PRO/100 Network Driver [ 0.837252] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.838192] e1000: Intel(R) PRO/1000 Network Driver [ 0.839002] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.839948] e1000e: Intel(R) PRO/1000 Network Driver [ 0.840762] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.841742] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.842622] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.844507] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.845760] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.847113] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.848317] hub 1-0:1.0: USB hub found [ 0.848974] hub 1-0:1.0: 2 ports detected [ 0.849934] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.851277] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.852780] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.860625] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.861811] hub 2-0:1.0: USB hub found [ 0.862470] hub 2-0:1.0: 6 ports detected [ 0.884646] hub 1-0:1.0: USB hub found [ 0.885357] hub 1-0:1.0: 2 ports detected [ 0.886228] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.887260] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.888676] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.889956] hub 3-0:1.0: USB hub found [ 0.890632] hub 3-0:1.0: 2 ports detected [ 0.892264] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.893269] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.894767] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.896035] hub 4-0:1.0: USB hub found [ 0.896716] hub 4-0:1.0: 2 ports detected [ 0.897615] usbcore: registered new interface driver usb-storage [ 0.898696] usbcore: registered new interface driver usbserial_generic [ 0.899884] usbserial: USB Serial support registered for generic [ 0.900898] usbcore: registered new interface driver ftdi_sio [ 0.902031] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.903305] usbcore: registered new interface driver pl2303 [ 0.904385] usbserial: USB Serial support registered for pl2303 [ 0.905446] i8042: PNP: No PS/2 controller found. [ 0.906393] mousedev: PS/2 mouse device common for all mice [ 0.907570] rtc_cmos 00:03: RTC can wake from S4 [ 0.908949] rtc_cmos 00:03: registered as rtc0 [ 0.909786] rtc_cmos 00:03: setting system clock to 2024-06-06T12:55:45 UTC (1717678545) [ 0.911309] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.912939] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.912959] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.914084] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.915555] intel_pstate: CPU model not supported [ 0.916441] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.917283] sdhci: Secure Digital Host Controller Interface driver [ 0.919592] sdhci: Copyright(c) Pierre Ossman [ 0.920402] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.921516] usbcore: registered new interface driver usbhid [ 0.922504] usbhid: USB HID core driver [ 0.923244] u32 classifier [ 0.923728] input device check on [ 0.924392] Actions configured [ 0.925106] NET: Registered PF_INET6 protocol family [ 0.926439] Segment Routing with IPv6 [ 0.927122] In-situ OAM (IOAM) with IPv6 [ 0.927855] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.929012] NET: Registered PF_PACKET protocol family [ 0.929897] Bridge firewalling registered [ 0.930622] Key type dns_resolver registered [ 0.931467] NET: Registered PF_VSOCK protocol family [ 0.932700] IPI shorthand broadcast: enabled [ 0.934999] sched_clock: Marking stable (807033778, 127559502)->(1015203049, -80609769) [ 0.936478] registered taskstats version 1 [ 0.937248] Loading compiled-in X.509 certificates [ 0.939495] Key type .fscrypt registered [ 0.940229] Key type fscrypt-provisioning registered [ 0.941532] Btrfs loaded, zoned=no, fsverity=no [ 0.942790] Key type encrypted registered [ 0.943614] printk: console [netcon0] enabled [ 0.944380] netconsole: network logging started [ 1.104618] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.141404] ata6: SATA link down (SStatus 0 SControl 300) [ 1.143185] ata2: SATA link down (SStatus 0 SControl 300) [ 1.144286] ata1: SATA link down (SStatus 0 SControl 300) [ 1.145381] ata5: SATA link down (SStatus 0 SControl 300) [ 1.146569] ata4: SATA link down (SStatus 0 SControl 300) [ 1.148413] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.149601] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.150535] ata3.00: applying bridge limits [ 1.151294] ata3.00: configured for UDMA/100 [ 1.152390] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.172807] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.173986] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.193613] IP-Config: Complete: [ 1.195060] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 1.196743] host=192.168.7.4, domain=, nis-domain=(none) [ 1.197677] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.197680] nameserver0=8.8.8.8 [ 1.199611] clk: Disabling unused clocks [ 1.200556] md: Waiting for all devices to be available before autodetect [ 1.201504] md: If you don't use raid, use raid=noautodetect [ 1.202228] md: Autodetecting RAID arrays. [ 1.202753] md: autorun ... [ 1.203140] md: ... autorun DONE. [ 1.238154] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.239767] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 [ 1.250686] EXT4-fs (vda): mounted filesystem 2276cef2-f7d7-4cce-b606-f4d54ed0c1a3 r/w with ordered data mode. Quota mode: disabled. [ 1.252249] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.256219] devtmpfs: mounted [ 1.258288] Freeing unused kernel image (initmem) memory: 3424K [ 1.259158] Write protecting the kernel read-only data: 24576k [ 1.260277] Freeing unused kernel image (rodata/data gap) memory: 864K [ 1.261209] Run /sbin/init as init process INIT: version 3.04 booting [ 1.356597] usb 2-2: new high-speed USB device number 3 using ehci-pci warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.500857] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.554695] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.571102] udevd[137]: starting version 3.2.14 [ 1.576218] udevd[138]: starting eudev-3.2.14 [ 1.862422] EXT4-fs (vda): re-mounted 2276cef2-f7d7-4cce-b606-f4d54ed0c1a3 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.296  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 344, uid: 1000, gid: 1000) 00:00:00.296  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.296  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 [ 2.902765] weston[344]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCVWEooT95XIJXgPNotJhffxasa5AhYzvnDAI0+4SpZUCgwkPvzsGKyPBPBz0Q8daJF12E1qEE6FQAvJCGpU3DaImnxCchipeIHP5SPfsqSkz8s4FId/rzcMhOcUwabANOAdH8A45+HnL548Go0tRdYia7HWGu9RXaMagrxg9YQbQUeM4yBUsfnFNNmRDvbPbpwacEX9dDFd+Dqa+FeDbbKmVJuT8COlUjAPnUf6VcHxY6IxN0UkE7FvOQlm3L0En3ZvjCKD9wGpE3d6rNYL38f1WGOMa8kTyevP8gGNRggbwuAT2dCpwJiBQV+H2VED+vUEoA+vldhJ4fBd/rXLboZ root@qemux86-64 Fingerprint: SHA256:SjlCX4vxnsHZhGROhujo8MGz78uLDtYCaiWQCIO98+c dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon [ 3.456213] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.457426] Bluetooth: BNEP filters: protocol multicast [ 3.457433] Bluetooth: BNEP socket layer initialized Poky (Yocto Project Reference Distro) 5.0+snapshot-6b75ee6f9d9cfdd19f1489162c86d8c610b59fa9 qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:28.346  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5946, uid: 0, gid: 0) 00:01:28.355  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:28.356  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy