[    1.824872] pci 0000:00:06.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.828472] pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref]
[    1.829058] pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref]
[    1.829511] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref]
[    1.829822] pci 0000:00:03.0: BAR 4: assigned [mem 0x8000008000-0x800000bfff 64bit pref]
[    1.830088] pci 0000:00:04.0: BAR 0: assigned [mem 0x800000c000-0x800000ffff 64bit]
[    1.830323] pci 0000:00:05.0: BAR 4: assigned [mem 0x8000010000-0x8000013fff 64bit pref]
[    1.830628] pci 0000:00:06.0: BAR 4: assigned [mem 0x8000014000-0x8000017fff 64bit pref]
[    1.830878] pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff]
[    1.831100] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff]
[    1.831600] pci 0000:00:03.0: BAR 1: assigned [mem 0x10042000-0x10042fff]
[    1.831832] pci 0000:00:05.0: BAR 1: assigned [mem 0x10043000-0x10043fff]
[    1.832032] pci 0000:00:06.0: BAR 1: assigned [mem 0x10044000-0x10044fff]
[    1.832252] pci 0000:00:03.0: BAR 0: assigned [io  0x1000-0x107f]
[    1.832486] pci 0000:00:05.0: BAR 0: assigned [io  0x1080-0x10bf]
[    1.832673] pci 0000:00:01.0: BAR 0: assigned [io  0x10c0-0x10df]
[    1.832896] pci 0000:00:02.0: BAR 0: assigned [io  0x10e0-0x10ff]
[    1.834728] pci 0000:00:04.0: enabling device (0000 -> 0002)
[    1.874106] pci 0000:00:04.0: quirk_usb_early_handoff+0x0/0xa48 took 38980 usecs
[    1.891972] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)
[    1.902962] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003)
[    1.907204] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003)
[    1.910351] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[    1.913222] virtio-pci 0000:00:06.0: enabling device (0000 -> 0002)
[    2.037615] [drm] pci: virtio-gpu-pci detected at 0000:00:06.0
[    2.038770] printk: console [hvc0] enabled
[    2.039296] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.040031] [drm] features: -context_init
[    2.042338] [drm] number of scanouts: 1
[    2.042585] [drm] number of cap sets: 0
[    2.068479] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:06.0 on minor 0
[    2.452250] Console: switching to colour frame buffer device 160x50
[    2.488202] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.544178] brd: module loaded
[    2.545908] virtio_blk virtio2: 4/0/0 default/read/poll queues
[    2.558994] virtio_blk virtio2: [vda] 1175016 512-byte logical blocks (602 MB/574 MiB)
[    2.591999] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    2.593658] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
[    2.600118] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.606898] xhci_hcd 0000:00:04.0: xHCI Host Controller
[    2.608190] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[    2.609080] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed
[    2.620534] hub 1-0:1.0: USB hub found
[    2.622268] hub 1-0:1.0: 4 ports detected
[    2.628851] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.633283] hub 2-0:1.0: USB hub found
[    2.634688] hub 2-0:1.0: 4 ports detected
[    2.652687] rtc-pl031 9010000.pl031: registered as rtc0
[    2.654995] rtc-pl031 9010000.pl031: setting system clock to 2024-06-06T12:48:50 UTC (1717678130)
[    2.664204] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.672245] usbcore: registered new interface driver usbhid
[    2.673141] usbhid: USB HID core driver
[    2.679194] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.682108] u32 classifier
[    2.682340]     input device check on
[    2.682605]     Actions configured
[    2.686368] NET: Registered PF_INET6 protocol family
[    2.709433] Segment Routing with IPv6
[    2.710401] In-situ OAM (IOAM) with IPv6
[    2.712740] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.718363] NET: Registered PF_PACKET protocol family
[    2.720453] Bridge firewalling registered
[    2.722510] Key type dns_resolver registered
[    2.724734] NET: Registered PF_VSOCK protocol family
[    2.757723] registered taskstats version 1
[    2.802709] Key type .fscrypt registered
[    2.803833] Key type fscrypt-provisioning registered
[    2.812809] Btrfs loaded, zoned=no, fsverity=no
[    2.865070] Key type encrypted registered
[    2.870167] printk: console [netcon0] enabled
[    2.871164] netconsole: network logging started
[    2.908536] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.932700] IP-Config: Complete:
[    2.933587]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    2.935722]      host=192.168.7.2, domain=, nis-domain=(none)
[    2.936969]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.937084]      nameserver0=8.8.8.8
[    2.945734] clk: Disabling unused clocks
[    2.953561] md: Waiting for all devices to be available before autodetect
[    2.955122] md: If you don't use raid, use raid=noautodetect
[    2.956703] md: Autodetecting RAID arrays.
[    2.957601] md: autorun ...
[    2.958234] md: ... autorun DONE.
[    3.060716] EXT4-fs (vda): mounted filesystem 6113da08-3584-4ee5-8fed-1a82cdd6912c r/w with ordered data mode. Quota mode: disabled.
[    3.062775] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.066684] devtmpfs: mounted
[    3.110174] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.115037] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0
[    3.211167] Freeing unused kernel memory: 4544K
[    3.213777] Run /sbin/init as init process
[    3.248384] usb 1-2: new high-speed USB device number 3 using xhci_hcd
INIT: version 3.04 booting
[    3.428671] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    3.497901] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    4.740209] udevd[126]: starting version 3.2.14
[    4.869994] udevd[127]: starting eudev-3.2.14
[    6.602111] EXT4-fs (vda): re-mounted 6113da08-3584-4ee5-8fed-1a82cdd6912c r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm64 6.6.32-yocto-standard #1 SMP PREEMPT Tue May 28 17:31:12 UTC 2024 aarch64
Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun  6 12:49:00 2024
Starting rpcbind daemon...(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon
[   16.949640] hrtimer: interrupt took 24449872 ns

Poky (Yocto Project Reference Distro) 5.0+snapshot-6b75ee6f9d9cfdd19f1489162c86d8c610b59fa9 qemuarm64 /dev/hvc0

qemuarm64 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-ARc2tiEu18,guid=6bedd6c09c0748289560df0f6661b045
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[570]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=539 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[570]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:571): Gtk-[1;33mWARNING[0m **: [34m12:49:19.755[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:571): [1;33mWARNING[0m **: [34m12:49:19.760[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
