[ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 17 pages/cpu s40724 r8192 d20716 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 497544K/524288K available (10240K kernel code, 1429K rwdata, 2772K rodata, 2048K init, 366K bss, 26744K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 41941 entries in 123 pages [ 0.000000] ftrace: allocated 123 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000532] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.001065] Switching to timer-based delay loop, resolution 16ns [ 0.031804] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.046289] Console: colour dummy device 80x30 [ 0.048959] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.049273] CPU: Testing write buffer coherency: ok [ 0.052255] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.052537] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.052691] pid_max: default: 32768 minimum: 301 [ 0.054914] LSM: initializing lsm=capability,landlock,integrity [ 0.055807] landlock: Up and running. [ 0.060596] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060709] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.102029] /cpus/cpu@0 missing clock-frequency property [ 0.102578] /cpus/cpu@1 missing clock-frequency property [ 0.102661] /cpus/cpu@2 missing clock-frequency property [ 0.102734] /cpus/cpu@3 missing clock-frequency property [ 0.103005] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.140979] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.143344] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.144078] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.147563] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.150487] rcu: Hierarchical SRCU implementation. [ 0.150614] rcu: Max phase no-delay instances is 1000. [ 0.170409] smp: Bringing up secondary CPUs ... [ 0.182643] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.182916] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.199174] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.199366] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.206726] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.206847] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.207968] smp: Brought up 1 node, 4 CPUs [ 0.208115] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.208237] CPU: All CPU(s) started in SVC mode. [ 0.237922] devtmpfs: initialized [ 0.270367] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.297445] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.300232] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.357962] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.371149] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.397458] cpuidle: using governor ladder [ 0.404448] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.404845] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.410643] Serial: AMBA PL011 UART driver [ 0.516858] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.520929] printk: console [ttyAMA0] enabled [ 0.593355] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.644428] cryptd: max_cpu_qlen set to 1000 [ 0.828692] raid6: neonx8 gen() 413 MB/s [ 1.001600] raid6: neonx4 gen() 857 MB/s [ 1.175626] raid6: neonx2 gen() 918 MB/s [ 1.349874] raid6: neonx1 gen() 528 MB/s [ 1.524812] raid6: int32x8 gen() 55 MB/s [ 1.698548] raid6: int32x4 gen() 59 MB/s [ 1.875833] raid6: int32x2 gen() 130 MB/s [ 2.051590] raid6: int32x1 gen() 102 MB/s [ 2.052506] raid6: using algorithm neonx2 gen() 918 MB/s [ 2.228785] raid6: .... xor() 336 MB/s, rmw enabled [ 2.230046] raid6: using neon recovery algorithm [ 2.246177] SCSI subsystem initialized [ 2.253156] usbcore: registered new interface driver usbfs [ 2.255275] usbcore: registered new interface driver hub [ 2.256985] usbcore: registered new device driver usb [ 2.261281] pps_core: LinuxPPS API ver. 1 registered [ 2.261704] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.262540] PTP clock support registered [ 2.333881] vgaarb: loaded [ 2.355356] clocksource: Switched to clocksource arch_sys_counter [ 2.539667] NET: Registered PF_INET protocol family [ 2.545014] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.566613] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.568006] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.569325] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.570996] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.575073] TCP: Hash tables configured (established 4096 bind 4096) [ 2.580064] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.582035] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.588851] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.603233] RPC: Registered named UNIX socket transport module. [ 2.605951] RPC: Registered udp transport module. [ 2.606649] RPC: Registered tcp transport module. [ 2.607261] RPC: Registered tcp-with-tls transport module. [ 2.607918] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.608998] PCI: CLS 0 bytes, default 64 [ 2.638490] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.656056] NFS: Registering the id_resolver key type [ 2.660137] Key type id_resolver registered [ 2.660936] Key type id_legacy registered [ 2.676506] Key type cifs.idmap registered [ 3.121138] xor: measuring software checksum speed [ 3.142042] arm4regs : 555 MB/sec [ 3.163141] 8regs : 503 MB/sec [ 3.185214] 32regs : 484 MB/sec [ 3.200739] neon : 719 MB/sec [ 3.201994] xor: using function: neon (719 MB/sec) [ 3.202914] async_tx: api initialized (async) [ 3.205121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.206454] io scheduler mq-deadline registered [ 3.207336] io scheduler kyber registered [ 3.218600] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 3.222828] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 3.225895] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 3.229716] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 3.237498] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 3.239114] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.240174] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.241113] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 3.247154] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 3.262449] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 3.264979] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 3.266819] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.268559] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.274540] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 3.275623] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.280013] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 3.281140] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.282957] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.289723] PCI: bus0: Fast back to back transfers disabled [ 3.295522] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 3.297557] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 3.298857] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 3.300100] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 3.301087] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 3.302743] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 3.306927] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 3.343560] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 3.352404] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 3.519597] printk: console [hvc0] enabled [ 3.520995] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 3.591057] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.591154] [drm] features: -context_init [ 3.596843] [drm] number of scanouts: 1 [ 3.597849] [drm] number of cap sets: 0 [ 3.630057] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 3.855695] Console: switching to colour frame buffer device 160x50 [ 3.877613] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.009881] brd: module loaded [ 4.013238] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 4.029470] virtio_blk virtio1: [vda] 892324 512-byte logical blocks (457 MB/436 MiB) [ 4.090356] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 4.095679] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 4.108202] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 4.122664] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 4.123861] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.125547] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 4.150141] hub 1-0:1.0: USB hub found [ 4.154255] hub 1-0:1.0: 4 ports detected [ 4.167953] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.174460] hub 2-0:1.0: USB hub found [ 4.175587] hub 2-0:1.0: 4 ports detected [ 4.200593] rtc-pl031 9010000.pl031: registered as rtc0 [ 4.204786] rtc-pl031 9010000.pl031: setting system clock to 2024-06-06T02:15:28 UTC (1717640128) [ 4.217289] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.231266] usbcore: registered new interface driver usbhid [ 4.233476] usbhid: USB HID core driver [ 4.236295] u32 classifier [ 4.237273] input device check on [ 4.238159] Actions configured [ 4.246218] NET: Registered PF_INET6 protocol family [ 4.277539] Segment Routing with IPv6 [ 4.279517] In-situ OAM (IOAM) with IPv6 [ 4.283273] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.295217] NET: Registered PF_PACKET protocol family [ 4.298926] Bridge firewalling registered [ 4.303739] Key type dns_resolver registered [ 4.307259] NET: Registered PF_VSOCK protocol family [ 4.313358] Registering SWP/SWPB emulation handler [ 4.469196] registered taskstats version 1 [ 4.493192] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 4.537435] Key type .fscrypt registered [ 4.538648] Key type fscrypt-provisioning registered [ 4.559002] Btrfs loaded, zoned=no, fsverity=no [ 4.566099] Key type encrypted registered [ 4.573123] printk: console [netcon0] enabled [ 4.574591] netconsole: network logging started [ 4.672903] IP-Config: Complete: [ 4.673882] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 4.675383] host=192.168.7.6, domain=, nis-domain=(none) [ 4.676080] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.676182] nameserver0=8.8.8.8 [ 4.695241] clk: Disabling unused clocks [ 4.742242] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 4.750243] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 4.755628] md: Waiting for all devices to be available before autodetect [ 4.757095] md: If you don't use raid, use raid=noautodetect [ 4.758478] md: Autodetecting RAID arrays. [ 4.759491] md: autorun ... [ 4.760289] md: ... autorun DONE. [ 4.912141] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 4.921173] EXT4-fs (vda): mounted filesystem 5c9e6010-3b7a-431f-8bfa-9c0609aa40ea r/w with ordered data mode. Quota mode: disabled. [ 4.929324] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.938334] devtmpfs: mounted [ 5.242557] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 5.333531] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 [ 5.354301] Freeing unused kernel image (initmem) memory: 2048K [ 5.570264] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 8.148152] udevd[131]: starting version 3.2.14 [ 8.330205] udevd[132]: starting eudev-3.2.14 [ 11.437042] EXT4-fs (vda): re-mounted 5c9e6010-3b7a-431f-8bfa-9c0609aa40ea r/w. Quota mode: disabled. [ 12.155337] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1Starting rpcbind daemon....13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.32-yocto-standard #1 SMP PREEMPT Tue May 28 17:31:17 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 6 02:15:47 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-b6b66ca07b2d7ea74c4aa61e9eec1cc7cb7f05ed qemuarm /dev/hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-tLEtP7igBt,guid=b77ced396d654837d62b909966611bde Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dbus-daemon[563]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=545 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[563]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:585): Gtk-WARNING **: 02:16:12.951: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:585): WARNING **: 02:16:12.966: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format [ 198.483433] hrtimer: interrupt took 40887632 ns