[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000338] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000719] Switching to timer-based delay loop, resolution 16ns [ 0.027907] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.043825] Console: colour dummy device 80x30 [ 0.046329] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.047241] CPU: Testing write buffer coherency: ok [ 0.050708] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.051067] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.051273] pid_max: default: 32768 minimum: 301 [ 0.054359] LSM: initializing lsm=capability,landlock,integrity [ 0.055490] landlock: Up and running. [ 0.061485] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.061604] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.113535] /cpus/cpu@0 missing clock-frequency property [ 0.114004] /cpus/cpu@1 missing clock-frequency property [ 0.114079] /cpus/cpu@2 missing clock-frequency property [ 0.114148] /cpus/cpu@3 missing clock-frequency property [ 0.114376] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.131814] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.132769] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.133178] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.134455] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.135945] rcu: Hierarchical SRCU implementation. [ 0.136004] rcu: Max phase no-delay instances is 1000. [ 0.143748] smp: Bringing up secondary CPUs ... [ 0.343788] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.343915] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.352437] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.352517] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.356207] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.356276] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.357090] smp: Brought up 1 node, 4 CPUs [ 0.357213] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.357310] CPU: All CPU(s) started in SVC mode. [ 0.386290] devtmpfs: initialized [ 0.405835] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.429823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.431084] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.457435] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.463566] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.475934] cpuidle: using governor ladder [ 0.479468] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.479601] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.482027] Serial: AMBA PL011 UART driver [ 0.533724] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.535641] printk: console [ttyAMA0] enabled [ 0.568143] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.580058] cryptd: max_cpu_qlen set to 1000 [ 0.751878] raid6: neonx8 gen() 590 MB/s [ 0.923875] raid6: neonx4 gen() 1652 MB/s [ 1.095804] raid6: neonx2 gen() 1496 MB/s [ 1.268078] raid6: neonx1 gen() 926 MB/s [ 1.440236] raid6: int32x8 gen() 121 MB/s [ 1.612223] raid6: int32x4 gen() 145 MB/s [ 1.784499] raid6: int32x2 gen() 454 MB/s [ 1.957185] raid6: int32x1 gen() 468 MB/s [ 1.957954] raid6: using algorithm neonx4 gen() 1652 MB/s [ 2.132677] raid6: .... xor() 759 MB/s, rmw enabled [ 2.133420] raid6: using neon recovery algorithm [ 2.140138] SCSI subsystem initialized [ 2.141822] usbcore: registered new interface driver usbfs [ 2.142530] usbcore: registered new interface driver hub [ 2.143355] usbcore: registered new device driver usb [ 2.144587] pps_core: LinuxPPS API ver. 1 registered [ 2.145251] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.145737] PTP clock support registered [ 2.167854] vgaarb: loaded [ 2.177916] clocksource: Switched to clocksource arch_sys_counter [ 2.276738] NET: Registered PF_INET protocol family [ 2.280573] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.298198] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.299456] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.300330] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.301031] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.301758] TCP: Hash tables configured (established 4096 bind 4096) [ 2.304827] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.306890] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.311030] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.320244] RPC: Registered named UNIX socket transport module. [ 2.321103] RPC: Registered udp transport module. [ 2.321583] RPC: Registered tcp transport module. [ 2.322069] RPC: Registered tcp-with-tls transport module. [ 2.322599] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.323467] PCI: CLS 0 bytes, default 64 [ 2.345123] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.356185] NFS: Registering the id_resolver key type [ 2.359045] Key type id_resolver registered [ 2.359647] Key type id_legacy registered [ 2.368131] Key type cifs.idmap registered [ 2.747998] xor: measuring software checksum speed [ 2.769670] arm4regs : 505 MB/sec [ 2.788100] 8regs : 574 MB/sec [ 2.806807] 32regs : 580 MB/sec [ 2.821105] neon : 1179 MB/sec [ 2.821684] xor: using function: neon (1179 MB/sec) [ 2.822055] async_tx: api initialized (async) [ 2.823176] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.823632] io scheduler mq-deadline registered [ 2.823879] io scheduler kyber registered [ 2.828942] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 2.830447] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 2.831713] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 2.833340] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 2.836321] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 2.836831] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.837083] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.837286] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 2.839384] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 2.846340] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 2.847069] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 2.847332] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.847592] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.848943] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 2.849186] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.850587] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 2.850845] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 2.851060] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.853350] PCI: bus0: Fast back to back transfers disabled [ 2.855425] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 2.856459] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 2.856799] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 2.857065] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 2.857264] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 2.857468] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 2.859250] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 2.873798] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 2.878877] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 2.939155] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 2.939600] printk: console [hvc0] enabled [ 2.940726] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.940776] [drm] features: -context_init [ 2.971406] [drm] number of scanouts: 1 [ 2.972068] [drm] number of cap sets: 0 [ 2.990456] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 3.114690] Console: switching to colour frame buffer device 160x50 [ 3.144361] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.204252] brd: module loaded [ 3.206189] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 3.214141] virtio_blk virtio1: [vda] 883806 512-byte logical blocks (453 MB/432 MiB) [ 3.244079] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 3.245548] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 3.252650] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 3.265404] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 3.266723] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.267722] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 3.280702] hub 1-0:1.0: USB hub found [ 3.282421] hub 1-0:1.0: 4 ports detected [ 3.289241] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.293415] hub 2-0:1.0: USB hub found [ 3.294355] hub 2-0:1.0: 4 ports detected [ 3.306951] rtc-pl031 9010000.pl031: registered as rtc0 [ 3.308844] rtc-pl031 9010000.pl031: setting system clock to 2024-06-12T21:46:21 UTC (1718228781) [ 3.315917] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.322237] usbcore: registered new interface driver usbhid [ 3.323039] usbhid: USB HID core driver [ 3.324060] u32 classifier [ 3.324338] input device check on [ 3.324634] Actions configured [ 3.329179] NET: Registered PF_INET6 protocol family [ 3.342545] Segment Routing with IPv6 [ 3.343344] In-situ OAM (IOAM) with IPv6 [ 3.344717] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.352047] NET: Registered PF_PACKET protocol family [ 3.353790] Bridge firewalling registered [ 3.355596] Key type dns_resolver registered [ 3.357948] NET: Registered PF_VSOCK protocol family [ 3.360318] Registering SWP/SWPB emulation handler [ 3.426905] registered taskstats version 1 [ 3.464477] Key type .fscrypt registered [ 3.465325] Key type fscrypt-provisioning registered [ 3.475524] Btrfs loaded, zoned=no, fsverity=no [ 3.484829] Key type encrypted registered [ 3.489031] printk: console [netcon0] enabled [ 3.489849] netconsole: network logging started [ 3.547031] IP-Config: Complete: [ 3.553732] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 3.555192] host=192.168.7.6, domain=, nis-domain=(none) [ 3.556402] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.556497] nameserver0=8.8.8.8 [ 3.562306] clk: Disabling unused clocks [ 3.569517] md: Waiting for all devices to be available before autodetect [ 3.570216] md: If you don't use raid, use raid=noautodetect [ 3.570682] md: Autodetecting RAID arrays. [ 3.571010] md: autorun ... [ 3.571274] md: ... autorun DONE. [ 3.586696] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 3.707836] EXT4-fs (vda): mounted filesystem 63f7cfc1-7321-42a9-8fa2-79b74ac8dad6 r/w with ordered data mode. Quota mode: disabled. [ 3.711519] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.717158] devtmpfs: mounted [ 3.878402] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.883043] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 4.008980] Freeing unused kernel image (initmem) memory: 2048K [ 4.178119] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 4.178396] Run /sbin/init as init process [ 4.390897] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 INIT: version 3.04 booting [ 4.469848] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 6.965180] udevd[128]: starting version 3.2.14 [ 7.118418] udevd[129]: starting eudev-3.2.14 [ 10.908192] EXT4-fs (vda): re-mounted 63f7cfc1-7321-42a9-8fa2-79b74ac8dad6 r/w. Quota mode: disabled. [ 11.973054] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.12 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.23-yocto-standard #1 SMP PREEMPT Thu Mar 28 16:04:55 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 12 21:46:42 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.1 qemuarm /dev/hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-qq5ZsDWMhl,guid=a2a7e0751e0410b7baf86829666a1749 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dbus-daemon[563]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=544 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[563]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:583): Gtk-WARNING **: 21:46:56.763: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:583): WARNING **: 21:46:56.778: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format