[    0.590617] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.620362] cryptd: max_cpu_qlen set to 1000
[    0.800608] raid6: neonx8   gen()   366 MB/s
[    0.974476] raid6: neonx4   gen()  1002 MB/s
[    1.147526] raid6: neonx2   gen()  1420 MB/s
[    1.322274] raid6: neonx1   gen()   920 MB/s
[    1.494459] raid6: int32x8  gen()   106 MB/s
[    1.666464] raid6: int32x4  gen()   134 MB/s
[    1.838360] raid6: int32x2  gen()   417 MB/s
[    2.010319] raid6: int32x1  gen()   282 MB/s
[    2.011256] raid6: using algorithm neonx2 gen() 1420 MB/s
[    2.182311] raid6: .... xor() 291 MB/s, rmw enabled
[    2.183004] raid6: using neon recovery algorithm
[    2.189301] SCSI subsystem initialized
[    2.190964] usbcore: registered new interface driver usbfs
[    2.191836] usbcore: registered new interface driver hub
[    2.192662] usbcore: registered new device driver usb
[    2.193801] pps_core: LinuxPPS API ver. 1 registered
[    2.193994] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.194430] PTP clock support registered
[    2.218399] vgaarb: loaded
[    2.228606] clocksource: Switched to clocksource arch_sys_counter
[    2.343156] NET: Registered PF_INET protocol family
[    2.347265] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.367032] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.368506] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.369646] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    2.370988] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.372388] TCP: Hash tables configured (established 4096 bind 4096)
[    2.377416] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.378938] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.384625] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.396162] RPC: Registered named UNIX socket transport module.
[    2.397705] RPC: Registered udp transport module.
[    2.398375] RPC: Registered tcp transport module.
[    2.399005] RPC: Registered tcp-with-tls transport module.
[    2.399700] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.400879] PCI: CLS 0 bytes, default 64
[    2.432431] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    2.445499] NFS: Registering the id_resolver key type
[    2.455352] Key type id_resolver registered
[    2.456180] Key type id_legacy registered
[    2.467770] Key type cifs.idmap registered
[    2.683215] xor: measuring software checksum speed
[    2.695869]    arm4regs        :   880 MB/sec
[    2.707916]    8regs           :  1100 MB/sec
[    2.718312]    32regs          :  1015 MB/sec
[    2.729292]    neon            :  1113 MB/sec
[    2.729751] xor: using function: neon (1113 MB/sec)
[    2.730236] async_tx: api initialized (async)
[    2.731406] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.732171] io scheduler mq-deadline registered
[    2.732653] io scheduler kyber registered
[    2.738983] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.740556] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.742062] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.744088] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.747632] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.749035] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.749816] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.750579] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.753980] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    2.761742] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    2.763080] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    2.763840] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.764682] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.767281] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    2.768078] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    2.770704] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    2.771442] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    2.772209] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.776052] PCI: bus0: Fast back to back transfers disabled
[    2.779679] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    2.781121] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    2.782060] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    2.782972] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    2.783686] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff]
[    2.784400] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    2.788054] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.805322] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.811012] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.874425] printk: console [hvc0] enabled
[    2.876324] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.897126] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.897195] [drm] features: -context_init
[    2.901000] [drm] number of scanouts: 1
[    2.901636] [drm] number of cap sets: 0
[    2.922367] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    3.066267] Console: switching to colour frame buffer device 160x50
[    3.105855] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    3.200404] brd: module loaded
[    3.202749] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    3.216568] virtio_blk virtio1: [vda] 883806 512-byte logical blocks (453 MB/432 MiB)
[    3.271238] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    3.273434] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    3.283567] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    3.294569] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    3.295722] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    3.297699] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    3.318035] hub 1-0:1.0: USB hub found
[    3.320680] hub 1-0:1.0: 4 ports detected
[    3.330805] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.336359] hub 2-0:1.0: USB hub found
[    3.337774] hub 2-0:1.0: 4 ports detected
[    3.351482] rtc-pl031 9010000.pl031: registered as rtc0
[    3.353966] rtc-pl031 9010000.pl031: setting system clock to 2024-06-15T15:46:15 UTC (1718466375)
[    3.362226] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    3.372389] usbcore: registered new interface driver usbhid
[    3.373505] usbhid: USB HID core driver
[    3.375158] u32 classifier
[    3.375723]     input device check on
[    3.376384]     Actions configured
[    3.382829] NET: Registered PF_INET6 protocol family
[    3.399417] Segment Routing with IPv6
[    3.400583] In-situ OAM (IOAM) with IPv6
[    3.402564] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.409177] NET: Registered PF_PACKET protocol family
[    3.411372] Bridge firewalling registered
[    3.414051] Key type dns_resolver registered
[    3.416371] NET: Registered PF_VSOCK protocol family
[    3.419932] Registering SWP/SWPB emulation handler
[    3.513127] registered taskstats version 1
[    3.568156] Key type .fscrypt registered
[    3.569070] Key type fscrypt-provisioning registered
[    3.586183] Btrfs loaded, zoned=no, fsverity=no
[    3.592159] Key type encrypted registered
[    3.598709] printk: console [netcon0] enabled
[    3.599835] netconsole: network logging started
[    3.657633] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.688689] IP-Config: Complete:
[    3.690164]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    3.692560]      host=192.168.7.8, domain=, nis-domain=(none)
[    3.693685]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.693827]      nameserver0=8.8.8.8
[    3.702253] clk: Disabling unused clocks
[    3.713243] md: Waiting for all devices to be available before autodetect
[    3.714544] md: If you don't use raid, use raid=noautodetect
[    3.715673] md: Autodetecting RAID arrays.
[    3.720769] md: autorun ...
[    3.721567] md: ... autorun DONE.
[    3.852511] EXT4-fs (vda): mounted filesystem 541bfbb1-0beb-4e7a-8a99-e5e73cfb0845 r/w with ordered data mode. Quota mode: disabled.
[    3.860463] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.869551] devtmpfs: mounted
[    3.884885] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.991983] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    4.157079] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    4.209992] Freeing unused kernel image (initmem) memory: 2048K
[    4.400010] Run /sbin/init as init process
[    4.525555] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    4.599627] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    8.126423] udevd[128]: starting version 3.2.14
[    8.350241] udevd[129]: starting eudev-3.2.14
[   13.470105] EXT4-fs (vda): re-mounted 541bfbb1-0beb-4e7a-8a99-e5e73cfb0845 r/w. Quota mode: disabled.
[   14.347352] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.12
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.6.23-yocto-standard #1 SMP PREEMPT Thu Mar 28 16:04:55 UTC 2024 armv7l
Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 15 15:46:45 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86CameraAccessEnable
> Warning:          Could not resolve keysym XF86CameraAccessDisable
> Warning:          Could not resolve keysym XF86CameraAccessToggle
> Warning:          Could not resolve keysym XF86NextElement
> Warning:          Could not resolve keysym XF86PreviousElement
> Warning:          Could not resolve keysym XF86AutopilotEngageToggle
> Warning:          Could not resolve keysym XF86MarkWaypoint
> Warning:          Could not resolve keysym XF86Sos
> Warning:          Could not resolve keysym XF86NavChart
> Warning:          Could not resolve keysym XF86FishingChart
> Warning:          Could not resolve keysym XF86SingleRangeRadar
> Warning:          Could not resolve keysym XF86DualRangeRadar
> Warning:          Could not resolve keysym XF86RadarOverlay
> Warning:          Could not resolve keysym XF86TraditionalSonar
> Warning:          Could not resolve keysym XF86ClearvuSonar
> Warning:          Could not resolve keysym XF86SidevuSonar
> Warning:          Could not resolve keysym XF86NavInfo
Errors from xkbcomp are not fatal to the X server
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.0.1 qemuarm /dev/hvc0

qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-ZbhVBoG1mV,guid=50fbdccc36afb26f8edb7e0a666db76a
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[561]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=542 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[561]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:577): Gtk-[1;33mWARNING[0m **: [34m15:47:01.046[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:577): [1;33mWARNING[0m **: [34m15:47:01.063[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
[  608.475747] hrtimer: interrupt took 38624032 ns
