[ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Thu Mar 28 16:05:00 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239040K/262140K available (14392K kernel code, 1471K rwdata, 2760K rodata, 436K init, 395K bss, 23100K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.32 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11933509765 ns [ 0.000524] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13408438268ns [ 0.032360] Console: colour dummy device 80x25 [ 0.034726] printk: console [tty0] enabled [ 0.036725] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Thu Mar 28 16:05:00 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239040K/262140K available (14392K kernel code, 1471K rwdata, 2760K rodata, 436K init, 395K bss, 23100K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.32 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11933509765 ns [ 0.000524] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13408438268ns [ 0.032360] Console: colour dummy device 80x25 [ 0.034726] printk: console [tty0] enabled [ 0.036725] printk: bootconsole [uart8250] disabled [ 0.042605] Calibrating delay loop... 789.70 BogoMIPS (lpj=3948544) [ 0.216905] pid_max: default: 32768 minimum: 301 [ 0.219045] LSM: initializing lsm=capability,landlock,integrity [ 0.220061] landlock: Up and running. [ 0.226696] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.226955] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.300412] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.302022] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.303181] Performance counters: No available PMU. [ 0.305932] rcu: Hierarchical SRCU implementation. [ 0.306094] rcu: Max phase no-delay instances is 1000. [ 0.327980] smp: Bringing up secondary CPUs ... [ 0.328804] smp: Brought up 1 node, 1 CPU [ 0.356140] devtmpfs: initialized [ 0.373518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.374046] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.390317] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.806290] raid6: int32x8 gen() 186 MB/s [ 1.164423] raid6: int32x4 gen() 366 MB/s [ 1.499209] raid6: int32x2 gen() 493 MB/s [ 1.848101] raid6: int32x1 gen() 408 MB/s [ 1.848356] raid6: using algorithm int32x2 gen() 493 MB/s [ 2.121345] raid6: .... xor() 317 MB/s, rmw enabled [ 2.121592] raid6: using intx1 recovery algorithm [ 2.126102] SCSI subsystem initialized [ 2.127045] usbcore: registered new interface driver usbfs [ 2.127524] usbcore: registered new interface driver hub [ 2.127862] usbcore: registered new device driver usb [ 2.128484] pps_core: LinuxPPS API ver. 1 registered [ 2.128578] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.128808] PTP clock support registered [ 2.155908] PCI host bridge to bus 0000:00 [ 2.156452] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.157222] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.157462] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.159727] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.160797] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.161058] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.161296] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.161431] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.161571] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.161711] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.165698] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.167172] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.167642] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.167869] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.167987] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.168124] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.168233] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.168879] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.169131] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.170133] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.170894] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.171111] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.171878] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.172018] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.172221] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.172363] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.173205] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.173393] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.173751] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.173960] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.174558] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.174715] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.174872] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.175495] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.175654] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.175811] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.176860] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.178843] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.179532] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.179798] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.180006] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.180339] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.180558] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.180742] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.180911] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.181037] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.181133] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.181241] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.181349] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.184446] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.184637] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.184808] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.184980] vgaarb: loaded [ 2.188076] clocksource: Switched to clocksource MIPS [ 2.230545] NET: Registered PF_INET protocol family [ 2.232340] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.243261] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.243597] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.243797] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.244144] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.244423] TCP: Hash tables configured (established 2048 bind 2048) [ 2.246228] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.246647] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.249226] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.253359] RPC: Registered named UNIX socket transport module. [ 2.253527] RPC: Registered udp transport module. [ 2.253603] RPC: Registered tcp transport module. [ 2.253673] RPC: Registered tcp-with-tls transport module. [ 2.253742] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.254875] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.256231] PCI: CLS 0 bytes, default 16 [ 2.270237] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.275534] NFS: Registering the id_resolver key type [ 2.277739] Key type id_resolver registered [ 2.277908] Key type id_legacy registered [ 2.281202] Key type cifs.idmap registered [ 2.900663] xor: measuring software checksum speed [ 2.914528] 8regs : 770 MB/sec [ 2.928009] 8regs_prefetch : 783 MB/sec [ 2.940854] 32regs : 791 MB/sec [ 2.955013] 32regs_prefetch : 772 MB/sec [ 2.955255] xor: using function: 32regs (791 MB/sec) [ 2.955994] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.956303] io scheduler mq-deadline registered [ 2.956458] io scheduler kyber registered [ 2.964803] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.969953] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.972132] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.975304] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.986187] printk: console [ttyS0] disabled [ 3.013954] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.014202] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 3.016671] printk: console [ttyS0] enabled [ 3.139198] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.140073] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 3.140844] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.153740] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 3.156805] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.158679] [drm] Found bochs VGA, ID 0xb0c5. [ 3.159204] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.168320] [drm] Found EDID data blob. [ 3.179282] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 3.253075] Console: switching to colour frame buffer device 160x50 [ 3.313657] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 3.381363] brd: module loaded [ 3.383576] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 3.395389] virtio_blk virtio2: [vda] 1140956 512-byte logical blocks (584 MB/557 MiB) [ 3.448064] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 3.451991] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 3.455355] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 3.484131] hub 1-0:1.0: USB hub found [ 3.486713] hub 1-0:1.0: 2 ports detected [ 3.503232] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.505307] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.518233] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.525752] usbcore: registered new interface driver usbhid [ 3.529086] usbhid: USB HID core driver [ 3.531661] u32 classifier [ 3.532642] input device check on [ 3.533694] Actions configured [ 3.539744] NET: Registered PF_INET6 protocol family [ 3.562741] Segment Routing with IPv6 [ 3.564351] In-situ OAM (IOAM) with IPv6 [ 3.566918] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.575582] NET: Registered PF_PACKET protocol family [ 3.579247] Bridge firewalling registered [ 3.583047] Key type dns_resolver registered [ 3.585518] NET: Registered PF_VSOCK protocol family [ 3.639808] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.694840] registered taskstats version 1 [ 3.745232] Key type .fscrypt registered [ 3.757534] Key type fscrypt-provisioning registered [ 3.788079] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.799518] Btrfs loaded, zoned=no, fsverity=no [ 3.890453] Key type encrypted registered [ 3.927129] printk: console [netcon0] enabled [ 3.957775] netconsole: network logging started [ 4.087127] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 4.095589] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 4.361879] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 4.478770] IP-Config: Complete: [ 4.508370] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 4.530788] host=192.168.7.8, domain=, nis-domain=(none) [ 4.557625] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.557854] nameserver0=8.8.8.8 [ 4.603781] clk: Disabling unused clocks [ 4.622025] md: Waiting for all devices to be available before autodetect [ 4.643948] md: If you don't use raid, use raid=noautodetect [ 4.657181] md: Autodetecting RAID arrays. [ 4.672035] md: autorun ... [ 4.678903] md: ... autorun DONE. [ 4.793381] EXT4-fs (vda): mounted filesystem 741e1acb-3511-4f11-ad80-d0f21a95ec6a r/w with ordered data mode. Quota mode: disabled. [ 4.819247] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.845859] devtmpfs: mounted [ 4.949953] Freeing unused kernel image (initmem) memory: 436K [ 4.972227] This architecture does not have kernel memory protection. [ 4.996977] Run /sbin/init as init process [ 5.067114] process '/sbin/init.sysvinit' started with executable stack [ 9.560328] udevd[92]: starting version 3.2.14 [ 9.724821] udevd[93]: starting eudev-3.2.14 [ 26.240323] EXT4-fs (vda): re-mounted 741e1acb-3511-4f11-ad80-d0f21a95ec6a r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1Starting rpcbind daemon....12 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.23-yocto-standard #1 SMP PREEMPT Thu Mar 28 16:05:00 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 16 13:14:48 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.1 qemumips /dev/ttyS0 qemumips login: