[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.32-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240620) #1 PREEMPT Tue May 28 17:31:12 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241052K/262144K available (10799K kernel code, 1429K rwdata, 2876K rodata, 472K init, 339K bss, 21092K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42906 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000391] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001578] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.011676] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.029955] Console: colour dummy device 80x30 [ 0.033723] Calibrating delay loop... 442.36 BogoMIPS (lpj=2211840) [ 0.126694] CPU: Testing write buffer coherency: ok [ 0.130117] pid_max: default: 32768 minimum: 301 [ 0.133409] LSM: initializing lsm=capability,landlock,integrity [ 0.134916] landlock: Up and running. [ 0.142586] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.142846] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.236090] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.238935] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.239987] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.242071] Setting up static identity map for 0x8400 - 0x8458 [ 0.244963] rcu: Hierarchical SRCU implementation. [ 0.245061] rcu: Max phase no-delay instances is 1000. [ 0.277184] devtmpfs: initialized [ 0.313550] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.316627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.316873] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.337426] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.348141] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.386232] platform bridge: Fixed dependency cycle(s) with /vga [ 0.388932] platform vga: Fixed dependency cycle(s) with /bridge [ 0.424654] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.425421] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.425934] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.441301] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.442118] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.455897] Serial: AMBA PL011 UART driver [ 0.476159] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.480493] printk: console [ttyAMA0] enabled [ 0.554235] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.562316] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.572349] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.576879] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.592559] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.978060] raid6: int32x8 gen() 32 MB/s [ 1.317848] raid6: int32x4 gen() 72 MB/s [ 1.667945] raid6: int32x2 gen() 211 MB/s [ 2.007953] raid6: int32x1 gen() 232 MB/s [ 2.009057] raid6: using algorithm int32x1 gen() 232 MB/s [ 2.348081] raid6: .... xor() 115 MB/s, rmw enabled [ 2.349240] raid6: using intx1 recovery algorithm [ 2.369917] SCSI subsystem initialized [ 2.374068] usbcore: registered new interface driver usbfs [ 2.375240] usbcore: registered new interface driver hub [ 2.392201] usbcore: registered new device driver usb [ 2.403502] pps_core: LinuxPPS API ver. 1 registered [ 2.404368] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.405410] PTP clock support registered [ 2.424007] Advanced Linux Sound Architecture Driver Initialized. [ 2.503800] vgaarb: loaded [ 2.521874] clocksource: Switched to clocksource arm,sp804 [ 3.335563] NET: Registered PF_INET protocol family [ 3.340251] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.364806] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.366105] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.366770] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.367462] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.368211] TCP: Hash tables configured (established 2048 bind 2048) [ 3.372306] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.374180] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.380152] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.393405] RPC: Registered named UNIX socket transport module. [ 3.394692] RPC: Registered udp transport module. [ 3.395487] RPC: Registered tcp transport module. [ 3.396202] RPC: Registered tcp-with-tls transport module. [ 3.397135] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.398306] PCI: CLS 0 bytes, default 32 [ 3.404686] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.436416] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.452579] NFS: Registering the id_resolver key type [ 3.456794] Key type id_resolver registered [ 3.457661] Key type id_legacy registered [ 3.472389] Key type cifs.idmap registered [ 3.965300] xor: measuring software checksum speed [ 3.990985] arm4regs : 473 MB/sec [ 4.010440] 8regs : 590 MB/sec [ 4.031017] 32regs : 552 MB/sec [ 4.032195] xor: using function: 8regs (590 MB/sec) [ 4.035124] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.036799] io scheduler mq-deadline registered [ 4.037760] io scheduler kyber registered [ 4.039432] io scheduler bfq registered [ 4.065962] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 4.070693] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 4.077565] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 4.083188] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 4.087294] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 4.089913] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 4.094423] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 4.095774] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 4.099341] versatile-pci 10001000.pci: PCI core found (slot 11) [ 4.105803] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 4.107480] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.109209] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.109735] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 4.110259] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 4.117285] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 4.120557] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 4.122607] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 4.123865] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.135093] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.136397] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.137073] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.137653] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.140353] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.140911] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.142334] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.146327] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.147559] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.150496] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.152333] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.155562] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.156575] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.157445] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.162525] PCI: bus0: Fast back to back transfers disabled [ 4.167743] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.169524] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.171052] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.172277] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.172868] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.174155] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.175320] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.175813] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.177034] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.178023] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.178988] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.179975] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.184657] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.190915] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.194716] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.200862] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.210402] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.215761] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.220939] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.230335] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.282441] random: crng init done [ 4.286838] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 4.289012] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.289140] [drm] features: -context_init [ 4.292208] [drm] number of scanouts: 1 [ 4.292978] [drm] number of cap sets: 0 [ 4.331509] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 4.638045] Console: switching to colour frame buffer device 160x50 [ 4.694704] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.735631] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 4.740544] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.889281] brd: module loaded [ 4.891044] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 4.903395] virtio_blk virtio3: [vda] 31160 512-byte logical blocks (16.0 MB/15.2 MiB) [ 4.964922] physmap-flash 34000000.flash: versatile/realview flash protection [ 4.999031] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 5.017428] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 5.024403] Intel/Sharp Extended Query Table at 0x0031 [ 5.027940] Using buffer write method [ 5.125271] smc91x: not found (-19). [ 5.128114] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 5.129843] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 5.208841] rtc-ds1307 0-0068: registered as rtc0 [ 5.220452] rtc-ds1307 0-0068: setting system clock to 2024-06-26T11:27:58 UTC (1719401278) [ 5.241096] rtc-pl031 101e8000.rtc: registered as rtc1 [ 5.246028] i2c_dev: i2c /dev entries driver [ 5.250114] versatile reboot driver registered [ 5.258664] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.270316] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 5.297288] leds-syscon 10000008.0.led: registered LED (null) [ 5.300221] leds-syscon 10000008.1.led: registered LED (null) [ 5.317900] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 5.324474] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 5.333838] leds-syscon 10000008.2.led: registered LED (null) [ 5.336470] leds-syscon 10000008.3.led: registered LED (null) [ 5.338642] leds-syscon 10000008.4.led: registered LED (null) [ 5.340717] leds-syscon 10000008.5.led: registered LED (null) [ 5.364666] leds-syscon 10000008.6.led: registered LED (null) [ 5.367447] leds-syscon 10000008.7.led: registered LED (null) [ 5.387074] ledtrig-cpu: registered to indicate activity on CPUs [ 5.407419] usbcore: registered new interface driver usbhid [ 5.408681] usbhid: USB HID core driver [ 5.495362] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.496930] aaci-pl041 10004000.aaci: FIFO 512 entries [ 5.500967] u32 classifier [ 5.504284] input device check on [ 5.505104] Actions configured [ 5.513772] NET: Registered PF_INET6 protocol family [ 5.541963] Segment Routing with IPv6 [ 5.543507] In-situ OAM (IOAM) with IPv6 [ 5.546390] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.558061] NET: Registered PF_PACKET protocol family [ 5.560878] Bridge firewalling registered [ 5.566978] Key type dns_resolver registered [ 5.570179] NET: Registered PF_VSOCK protocol family [ 5.740676] registered taskstats version 1 [ 5.884206] Key type .fscrypt registered [ 5.885153] Key type fscrypt-provisioning registered [ 5.909886] Btrfs loaded, zoned=no, fsverity=no [ 5.934037] Key type encrypted registered [ 5.950908] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.954049] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.957442] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.964095] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.965626] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.968989] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.976452] printk: console [netcon0] enabled [ 5.977543] netconsole: network logging started [ 6.022607] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 6.029373] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.030932] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.034661] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.154869] IP-Config: Complete: [ 6.155832] device=eth0, hwaddr=52:54:00:12:34:14, ipaddr=192.168.7.20, mask=255.255.255.0, gw=192.168.7.19 [ 6.158204] host=192.168.7.20, domain=, nis-domain=(none) [ 6.159289] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 6.159489] nameserver0=8.8.8.8 [ 6.181277] clk: Disabling unused clocks [ 6.189852] ALSA device list: [ 6.190922] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.227210] md: Waiting for all devices to be available before autodetect [ 6.230664] md: If you don't use raid, use raid=noautodetect [ 6.235389] md: Autodetecting RAID arrays. [ 6.237949] md: autorun ... [ 6.238582] md: ... autorun DONE. [ 6.417524] EXT4-fs (vda): mounted filesystem 344a2ed4-fad8-461f-840c-51ae24a99bb6 r/w with ordered data mode. Quota mode: disabled. [ 6.420223] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.438917] devtmpfs: mounted [ 6.540931] Freeing unused kernel image (initmem) memory: 472K [ 6.544096] Kernel memory protection not selected by kernel config. [ 6.545855] Run /sbin/init as init process INIT: version 3.04 booting Starting udev [ 10.790166] udevd[86]: starting version 3.2.14 [ 11.319077] udevd[87]: starting eudev-3.2.14 [ 16.504227] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 16.504948] clcd-pl11x: probe of 10120000.display failed with error -2 [ 16.506556] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 16.508354] amba 10100000.smc: deferred probe pending [ 16.508852] amba 10110000.mpmc: deferred probe pending [ 16.509294] amba 101e0000.sctl: deferred probe pending [ 16.509722] amba 101e1000.watchdog: deferred probe pending [ 16.510157] amba 101f0000.sci: deferred probe pending [ 16.510554] amba 101f4000.spi: deferred probe pending [ 16.510939] amba 1000a000.sci: deferred probe pending [ 16.511329] amba 10120000.display: deferred probe pending [ 17.265484] EXT4-fs (vda): re-mounted 344a2ed4-fad8-461f-840c-51ae24a99bb6 r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.0+snapshot-1926d4dae8e5a091a170e13a6b015e62a7edb2f3 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: