[ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000424] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000897] Switching to timer-based delay loop, resolution 16ns [ 0.035289] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.054354] Console: colour dummy device 80x30 [ 0.121000] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.121583] CPU: Testing write buffer coherency: ok [ 0.125538] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.126012] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.126270] pid_max: default: 32768 minimum: 301 [ 0.130049] LSM: initializing lsm=capability,landlock,integrity [ 0.131999] landlock: Up and running. [ 0.139018] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.139198] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.277981] /cpus/cpu@0 missing clock-frequency property [ 0.278921] /cpus/cpu@1 missing clock-frequency property [ 0.279059] /cpus/cpu@2 missing clock-frequency property [ 0.279192] /cpus/cpu@3 missing clock-frequency property [ 0.279592] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.309511] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.311590] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.312475] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.315221] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.318203] rcu: Hierarchical SRCU implementation. [ 0.318320] rcu: Max phase no-delay instances is 1000. [ 0.334935] smp: Bringing up secondary CPUs ... [ 0.435121] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.435349] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.446886] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.446978] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.452566] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.452700] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.454114] smp: Brought up 1 node, 4 CPUs [ 0.454334] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.454517] CPU: All CPU(s) started in SVC mode. [ 0.581380] devtmpfs: initialized [ 0.710500] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.756793] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.758150] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.868220] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.880665] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.946330] cpuidle: using governor ladder [ 0.951963] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.952342] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.958431] Serial: AMBA PL011 UART driver [ 1.069892] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 1.073732] printk: console [ttyAMA0] enabled [ 1.245599] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.266034] cryptd: max_cpu_qlen set to 1000 [ 1.443503] raid6: neonx8 gen() 528 MB/s [ 1.618953] raid6: neonx4 gen() 1343 MB/s [ 1.793576] raid6: neonx2 gen() 1239 MB/s [ 1.968743] raid6: neonx1 gen() 735 MB/s [ 2.146030] raid6: int32x8 gen() 37 MB/s [ 2.321519] raid6: int32x4 gen() 93 MB/s [ 2.496129] raid6: int32x2 gen() 250 MB/s [ 2.671436] raid6: int32x1 gen() 254 MB/s [ 2.673095] raid6: using algorithm neonx4 gen() 1343 MB/s [ 2.850740] raid6: .... xor() 339 MB/s, rmw enabled [ 2.851908] raid6: using neon recovery algorithm [ 2.863920] SCSI subsystem initialized [ 2.867335] usbcore: registered new interface driver usbfs [ 2.869058] usbcore: registered new interface driver hub [ 2.870350] usbcore: registered new device driver usb [ 2.872357] pps_core: LinuxPPS API ver. 1 registered [ 2.872737] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.873770] PTP clock support registered [ 2.972355] vgaarb: loaded [ 2.988602] clocksource: Switched to clocksource arch_sys_counter [ 3.106262] NET: Registered PF_INET protocol family [ 3.110926] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 3.132372] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 3.133760] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.134926] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 3.136165] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.138174] TCP: Hash tables configured (established 4096 bind 4096) [ 3.141807] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.142772] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.148396] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.188874] RPC: Registered named UNIX socket transport module. [ 3.189927] RPC: Registered udp transport module. [ 3.190711] RPC: Registered tcp transport module. [ 3.191334] RPC: Registered tcp-with-tls transport module. [ 3.191974] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.193024] PCI: CLS 0 bytes, default 64 [ 3.233565] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 3.247219] NFS: Registering the id_resolver key type [ 3.250787] Key type id_resolver registered [ 3.251548] Key type id_legacy registered [ 3.298947] Key type cifs.idmap registered [ 3.735824] xor: measuring software checksum speed [ 3.757473] arm4regs : 503 MB/sec [ 3.774824] 8regs : 634 MB/sec [ 3.794814] 32regs : 563 MB/sec [ 3.811165] neon : 847 MB/sec [ 3.812140] xor: using function: neon (847 MB/sec) [ 3.812934] async_tx: api initialized (async) [ 3.814948] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.815987] io scheduler mq-deadline registered [ 3.816892] io scheduler kyber registered [ 3.826085] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 3.829237] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 3.831217] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 3.833956] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 3.839761] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 3.841335] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.842243] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.843085] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 3.849761] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 3.861300] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 3.862791] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 3.863307] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.863884] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.867048] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 3.867553] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.871174] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 3.871665] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.872080] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.898276] PCI: bus0: Fast back to back transfers disabled [ 3.903067] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 3.905008] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 3.906524] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 3.908556] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 3.909532] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 3.910003] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 3.913518] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 3.942982] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 3.952952] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 4.241916] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 4.291768] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.291912] [drm] features: -context_init [ 4.301846] [drm] number of scanouts: 1 [ 4.302608] [drm] number of cap sets: 0 [ 4.422424] printk: console [hvc0] enabled [ 4.424504] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 4.764473] Console: switching to colour frame buffer device 160x50 [ 4.800688] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.912159] brd: module loaded [ 4.914903] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 4.929994] virtio_blk virtio1: [vda] 892980 512-byte logical blocks (457 MB/436 MiB) [ 5.040696] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 5.043582] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 5.055148] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 5.074071] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 5.075700] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 5.078055] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 5.103773] hub 1-0:1.0: USB hub found [ 5.107545] hub 1-0:1.0: 4 ports detected [ 5.128496] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.138682] hub 2-0:1.0: USB hub found [ 5.141067] hub 2-0:1.0: 4 ports detected [ 5.178775] rtc-pl031 9010000.pl031: registered as rtc0 [ 5.181886] rtc-pl031 9010000.pl031: setting system clock to 2024-06-28T22:25:32 UTC (1719613532) [ 5.193490] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.205563] usbcore: registered new interface driver usbhid [ 5.207717] usbhid: USB HID core driver [ 5.210548] u32 classifier [ 5.211535] input device check on [ 5.212477] Actions configured [ 5.220595] NET: Registered PF_INET6 protocol family [ 5.251551] Segment Routing with IPv6 [ 5.253607] In-situ OAM (IOAM) with IPv6 [ 5.258943] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.383315] NET: Registered PF_PACKET protocol family [ 5.389335] Bridge firewalling registered [ 5.394656] Key type dns_resolver registered [ 5.399450] NET: Registered PF_VSOCK protocol family [ 5.404642] Registering SWP/SWPB emulation handler [ 5.558277] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 5.579636] registered taskstats version 1 [ 5.662548] Key type .fscrypt registered [ 5.664148] Key type fscrypt-provisioning registered [ 5.688140] Btrfs loaded, zoned=no, fsverity=no [ 5.694619] Key type encrypted registered [ 5.714684] printk: console [netcon0] enabled [ 5.716901] netconsole: network logging started [ 5.959255] IP-Config: Complete: [ 5.972625] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 5.997479] host=192.168.7.4, domain=, nis-domain=(none) [ 5.999177] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.999377] nameserver0=8.8.8.8 [ 6.011922] clk: Disabling unused clocks [ 6.015447] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 6.031417] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 6.044019] md: Waiting for all devices to be available before autodetect [ 6.046117] md: If you don't use raid, use raid=noautodetect [ 6.050799] md: Autodetecting RAID arrays. [ 6.052123] md: autorun ... [ 6.052974] md: ... autorun DONE. [ 6.197186] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 6.270371] EXT4-fs (vda): mounted filesystem 4fa1d707-a5ca-45bc-b1aa-e0bc951f80c1 r/w with ordered data mode. Quota mode: disabled. [ 6.277545] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.286328] devtmpfs: mounted [ 6.798067] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 6.880687] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 [ 7.013833] Freeing unused kernel image (initmem) memory: 2048K [ 7.228215] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 12.345991] udevd[130]: starting version 3.2.14 [ 12.933305] udevd[131]: starting eudev-3.2.14 [ 20.232696] EXT4-fs (vda): re-mounted 4fa1d707-a5ca-45bc-b1aa-e0bc951f80c1 r/w. Quota mode: disabled. [ 21.319939] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1Starting rpcbind daemon....13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.32-yocto-standard #1 SMP PREEMPT Tue May 28 17:31:17 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 28 22:25:57 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-01248f707809bc0f8b01861430189012310a9894 qemuarm /dev/hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-uJkqdFHTjG,guid=74f60add78148c3a86a620db667f387c Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[568]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=579 comm="matchbox-panel --start-applets showdesktop,windows") dbus-daemon[568]: Successfully activated service 'org.a11y.atspi.Registry' matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:578): Gtk-WARNING **: 22:26:14.790: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:578): WARNING **: 22:26:14.800: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format