[ 0.000000] Linux version 6.6.35-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240620) #1 SMP PREEMPT Fri Jun 28 17:07:49 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238912K/262140K available (14555K kernel code, 1468K rwdata, 2764K rodata, 400K init, 395K bss, 23228K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11944839229 ns [ 0.000249] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421167612ns [ 0.015058] Console: colour dummy device 80x25 [ 0.016159] printk: console [tty0] enabled [ 0.017122] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.35-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240620) #1 SMP PREEMPT Fri Jun 28 17:07:49 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238912K/262140K available (14555K kernel code, 1468K rwdata, 2764K rodata, 400K init, 395K bss, 23228K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11944839229 ns [ 0.000249] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421167612ns [ 0.015058] Console: colour dummy device 80x25 [ 0.016159] printk: console [tty0] enabled [ 0.017122] printk: bootconsole [uart8250] disabled [ 0.020093] Calibrating delay loop... 950.27 BogoMIPS (lpj=4751360) [ 0.092592] pid_max: default: 32768 minimum: 301 [ 0.094486] LSM: initializing lsm=capability,landlock,integrity [ 0.095233] landlock: Up and running. [ 0.098847] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.099041] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.147371] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.147867] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.148900] Performance counters: No available PMU. [ 0.150374] rcu: Hierarchical SRCU implementation. [ 0.150461] rcu: Max phase no-delay instances is 1000. [ 0.159603] smp: Bringing up secondary CPUs ... [ 0.160022] smp: Brought up 1 node, 1 CPU [ 0.176434] devtmpfs: initialized [ 0.185977] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.186281] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.197361] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.588283] raid6: int32x8 gen() 239 MB/s [ 0.930758] raid6: int32x4 gen() 610 MB/s [ 1.273567] raid6: int32x2 gen() 656 MB/s [ 1.536376] raid6: int32x1 gen() 518 MB/s [ 1.536577] raid6: using algorithm int32x2 gen() 656 MB/s [ 1.707316] raid6: .... xor() 379 MB/s, rmw enabled [ 1.707524] raid6: using intx1 recovery algorithm [ 1.711634] SCSI subsystem initialized [ 1.712449] usbcore: registered new interface driver usbfs [ 1.712928] usbcore: registered new interface driver hub [ 1.713216] usbcore: registered new device driver usb [ 1.713823] pps_core: LinuxPPS API ver. 1 registered [ 1.713898] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.714130] PTP clock support registered [ 1.736755] PCI host bridge to bus 0000:00 [ 1.737214] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.737941] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.738171] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.740129] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 1.741147] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 1.741356] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.741576] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.741693] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.741825] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.741946] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.745239] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.746300] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.746716] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.746903] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.747014] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.747143] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.747241] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.747809] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.748063] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.748856] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.749540] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.749734] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.750455] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.750580] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.750771] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.750897] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.751530] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.751680] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.751857] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.752038] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.752573] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.752714] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.752852] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.753402] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.753548] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.753704] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.754632] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.756441] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.756867] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.757031] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.757161] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.757363] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.757494] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.757666] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.757831] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.758027] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.758116] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.758212] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.758307] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.760744] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 1.760904] pci 0000:00:12.0: vgaarb: bridge control possible [ 1.761038] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.761205] vgaarb: loaded [ 1.763899] clocksource: Switched to clocksource MIPS [ 1.799603] NET: Registered PF_INET protocol family [ 1.801212] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.811070] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.811327] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.811503] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.811795] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.812046] TCP: Hash tables configured (established 2048 bind 2048) [ 1.813789] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.814151] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.816297] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.819824] RPC: Registered named UNIX socket transport module. [ 1.819973] RPC: Registered udp transport module. [ 1.820040] RPC: Registered tcp transport module. [ 1.820100] RPC: Registered tcp-with-tls transport module. [ 1.820160] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.821160] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.822329] PCI: CLS 0 bytes, default 16 [ 1.833863] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.838234] NFS: Registering the id_resolver key type [ 1.839950] Key type id_resolver registered [ 1.840058] Key type id_legacy registered [ 1.842900] Key type cifs.idmap registered [ 2.216371] xor: measuring software checksum speed [ 2.227074] 8regs : 970 MB/sec [ 2.238021] 8regs_prefetch : 918 MB/sec [ 2.248559] 32regs : 984 MB/sec [ 2.259448] 32regs_prefetch : 936 MB/sec [ 2.259559] xor: using function: 32regs (984 MB/sec) [ 2.260120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.260379] io scheduler mq-deadline registered [ 2.260517] io scheduler kyber registered [ 2.267701] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.271432] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.272797] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.275654] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.285714] printk: console [ttyS0] disabled [ 2.312890] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.313055] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.315380] printk: console [ttyS0] enabled [ 2.415762] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.416493] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.417037] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.427343] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 2.430002] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.431422] [drm] Found bochs VGA, ID 0xb0c5. [ 2.431888] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.437377] [drm] Found EDID data blob. [ 2.446408] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.526624] Console: switching to colour frame buffer device 160x50 [ 2.540954] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.586378] brd: module loaded [ 2.587899] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 2.597414] virtio_blk virtio2: [vda] 1151846 512-byte logical blocks (590 MB/562 MiB) [ 2.627739] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 2.629800] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 2.631522] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 2.644803] hub 1-0:1.0: USB hub found [ 2.646090] hub 1-0:1.0: 2 ports detected [ 2.657729] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.659387] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.664910] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.669197] usbcore: registered new interface driver usbhid [ 2.669849] usbhid: USB HID core driver [ 2.670977] u32 classifier [ 2.671337] input device check on [ 2.671758] Actions configured [ 2.677382] NET: Registered PF_INET6 protocol family [ 2.689309] Segment Routing with IPv6 [ 2.690244] In-situ OAM (IOAM) with IPv6 [ 2.691838] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.696457] NET: Registered PF_PACKET protocol family [ 2.697925] Bridge firewalling registered [ 2.699812] Key type dns_resolver registered [ 2.701171] NET: Registered PF_VSOCK protocol family [ 2.734510] registered taskstats version 1 [ 2.763055] Key type .fscrypt registered [ 2.772542] Key type fscrypt-provisioning registered [ 2.794882] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.803309] Btrfs loaded, zoned=no, fsverity=no [ 2.849043] Key type encrypted registered [ 2.861264] printk: console [netcon0] enabled [ 2.870357] netconsole: network logging started [ 2.983652] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.247244] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 3.254356] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 3.445388] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.503783] IP-Config: Complete: [ 3.513309] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 3.518524] host=192.168.7.4, domain=, nis-domain=(none) [ 3.523085] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.527971] nameserver0=8.8.8.8 [ 3.555660] clk: Disabling unused clocks [ 3.570809] md: Waiting for all devices to be available before autodetect [ 3.584491] md: If you don't use raid, use raid=noautodetect [ 3.593363] md: Autodetecting RAID arrays. [ 3.602163] md: autorun ... [ 3.611449] md: ... autorun DONE. [ 3.671302] EXT4-fs (vda): mounted filesystem 130ac14d-5624-4cb5-ab6d-6007def90002 r/w with ordered data mode. Quota mode: disabled. [ 3.682858] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.699369] devtmpfs: mounted [ 3.781877] Freeing unused kernel image (initmem) memory: 400K [ 3.793353] This architecture does not have kernel memory protection. [ 3.798751] Run /sbin/init as init process [ 3.838009] process '/sbin/init.sysvinit' started with executable stack [ 6.778785] udevd[93]: starting version 3.2.14 [ 6.909781] udevd[94]: starting eudev-3.2.14 [ 23.576321] EXT4-fs (vda): re-mounted 130ac14d-5624-4cb5-ab6d-6007def90002 r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.35-yocto-standard #1 SMP PREEMPT Fri Jun 28 17:07:49 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: Starting rpcbind daemon...(--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 4 17:02:57 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-8990aaa7cbcef61562828cc6b501c78b48ec41b8 qemumips /dev/ttyS0 qemumips login: