[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.35-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.1.0, GNU ld (GNU Binutils) 2.42.0.20240620) #1 PREEMPT Fri Jun 28 17:07:28 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241052K/262144K available (10802K kernel code, 1430K rwdata, 2880K rodata, 468K init, 339K bss, 21092K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42917 entries in 126 pages [ 0.000000] ftrace: allocated 126 pages with 6 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000399] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001395] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.011292] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.028463] Console: colour dummy device 80x30 [ 0.032518] Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904) [ 0.228962] CPU: Testing write buffer coherency: ok [ 0.232260] pid_max: default: 32768 minimum: 301 [ 0.235413] LSM: initializing lsm=capability,landlock,integrity [ 0.236816] landlock: Up and running. [ 0.243882] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.244078] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.322651] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.324508] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.325472] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.327271] Setting up static identity map for 0x8400 - 0x8458 [ 0.329715] rcu: Hierarchical SRCU implementation. [ 0.329815] rcu: Max phase no-delay instances is 1000. [ 0.360859] devtmpfs: initialized [ 0.396580] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.400628] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.400920] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.422862] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.433300] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.473684] platform bridge: Fixed dependency cycle(s) with /vga [ 0.476027] platform vga: Fixed dependency cycle(s) with /bridge [ 0.512911] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.513651] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.514219] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.528340] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.529170] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.543036] Serial: AMBA PL011 UART driver [ 0.562552] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.565483] printk: console [ttyAMA0] enabled [ 0.610475] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.617425] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.626785] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.631539] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.644731] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.028225] raid6: int32x8 gen() 32 MB/s [ 1.368147] raid6: int32x4 gen() 67 MB/s [ 1.708336] raid6: int32x2 gen() 198 MB/s [ 2.108645] raid6: int32x1 gen() 226 MB/s [ 2.109532] raid6: using algorithm int32x1 gen() 226 MB/s [ 2.478200] raid6: .... xor() 114 MB/s, rmw enabled [ 2.479198] raid6: using intx1 recovery algorithm [ 2.487236] SCSI subsystem initialized [ 2.502069] usbcore: registered new interface driver usbfs [ 2.503516] usbcore: registered new interface driver hub [ 2.504585] usbcore: registered new device driver usb [ 2.525631] pps_core: LinuxPPS API ver. 1 registered [ 2.526441] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.527720] PTP clock support registered [ 2.545516] Advanced Linux Sound Architecture Driver Initialized. [ 2.607609] vgaarb: loaded [ 2.626645] clocksource: Switched to clocksource arm,sp804 [ 3.385179] NET: Registered PF_INET protocol family [ 3.390167] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.411889] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.413332] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.414377] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.415473] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.417179] TCP: Hash tables configured (established 2048 bind 2048) [ 3.420813] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.422114] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.428316] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.439211] RPC: Registered named UNIX socket transport module. [ 3.440239] RPC: Registered udp transport module. [ 3.440784] RPC: Registered tcp transport module. [ 3.441288] RPC: Registered tcp-with-tls transport module. [ 3.441847] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.442861] PCI: CLS 0 bytes, default 32 [ 3.448250] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.478251] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.494021] NFS: Registering the id_resolver key type [ 3.498512] Key type id_resolver registered [ 3.499375] Key type id_legacy registered [ 3.512701] Key type cifs.idmap registered [ 3.997919] xor: measuring software checksum speed [ 4.021379] arm4regs : 494 MB/sec [ 4.040862] 8regs : 569 MB/sec [ 4.060820] 32regs : 562 MB/sec [ 4.061738] xor: using function: 8regs (569 MB/sec) [ 4.063786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.064850] io scheduler mq-deadline registered [ 4.065309] io scheduler kyber registered [ 4.066362] io scheduler bfq registered [ 4.089763] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 4.093749] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 4.099467] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 4.103245] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 4.107544] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 4.109761] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 4.111831] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 4.112839] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 4.116204] versatile-pci 10001000.pci: PCI core found (slot 11) [ 4.121459] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 4.122817] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.124109] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.124893] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 4.125746] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 4.132618] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 4.135258] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 4.136189] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 4.136998] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.145257] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.146882] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.147806] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.148733] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.151528] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.152385] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.153117] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.155857] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.157799] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.160540] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.161368] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.163679] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.164500] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.165252] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.170967] PCI: bus0: Fast back to back transfers disabled [ 4.174499] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.175837] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.178099] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.179103] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.179920] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.180798] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.181707] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.182547] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.183304] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.183697] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.184030] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.184372] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.188797] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.194202] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.198072] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.204291] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.211721] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.214915] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.224127] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.230070] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.271755] random: crng init done [ 4.296157] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 4.298657] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.298779] [drm] features: -context_init [ 4.300865] [drm] number of scanouts: 1 [ 4.301410] [drm] number of cap sets: 0 [ 4.334799] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 4.611327] Console: switching to colour frame buffer device 160x50 [ 4.656404] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.691855] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 4.707448] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.854612] brd: module loaded [ 4.855788] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 4.861854] virtio_blk virtio3: [vda] 966736 512-byte logical blocks (495 MB/472 MiB) [ 4.883374] physmap-flash 34000000.flash: versatile/realview flash protection [ 4.898600] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 4.901816] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 4.903088] Intel/Sharp Extended Query Table at 0x0031 [ 4.904132] Using buffer write method [ 4.955130] smc91x: not found (-19). [ 4.960740] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 4.962350] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 5.045794] rtc-ds1307 0-0068: registered as rtc0 [ 5.061293] rtc-ds1307 0-0068: setting system clock to 2024-07-07T14:54:48 UTC (1720364088) [ 5.078882] rtc-pl031 101e8000.rtc: registered as rtc1 [ 5.081368] i2c_dev: i2c /dev entries driver [ 5.084383] versatile reboot driver registered [ 5.091452] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.114817] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 5.136061] leds-syscon 10000008.0.led: registered LED (null) [ 5.140767] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 5.147797] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 5.152916] leds-syscon 10000008.1.led: registered LED (null) [ 5.154989] leds-syscon 10000008.2.led: registered LED (null) [ 5.179562] leds-syscon 10000008.3.led: registered LED (null) [ 5.181834] leds-syscon 10000008.4.led: registered LED (null) [ 5.183649] leds-syscon 10000008.5.led: registered LED (null) [ 5.185454] leds-syscon 10000008.6.led: registered LED (null) [ 5.187755] leds-syscon 10000008.7.led: registered LED (null) [ 5.221787] ledtrig-cpu: registered to indicate activity on CPUs [ 5.235666] usbcore: registered new interface driver usbhid [ 5.239013] usbhid: USB HID core driver [ 5.291583] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.292779] aaci-pl041 10004000.aaci: FIFO 512 entries [ 5.295992] u32 classifier [ 5.298960] input device check on [ 5.299650] Actions configured [ 5.307166] NET: Registered PF_INET6 protocol family [ 5.328846] Segment Routing with IPv6 [ 5.330193] In-situ OAM (IOAM) with IPv6 [ 5.332856] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.342721] NET: Registered PF_PACKET protocol family [ 5.345029] Bridge firewalling registered [ 5.348451] Key type dns_resolver registered [ 5.351235] NET: Registered PF_VSOCK protocol family [ 5.506114] registered taskstats version 1 [ 5.656857] Key type .fscrypt registered [ 5.657682] Key type fscrypt-provisioning registered [ 5.691683] Btrfs loaded, zoned=no, fsverity=no [ 5.712560] Key type encrypted registered [ 5.725090] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.728478] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.731444] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.738388] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.739544] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.744295] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.751930] printk: console [netcon0] enabled [ 5.753056] netconsole: network logging started [ 5.863927] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 5.869942] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.871163] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.887081] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.987965] IP-Config: Complete: [ 5.988673] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 5.990360] host=192.168.7.4, domain=, nis-domain=(none) [ 5.991131] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.991283] nameserver0=8.8.8.8 [ 6.039574] clk: Disabling unused clocks [ 6.041275] ALSA device list: [ 6.041865] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.059860] md: Waiting for all devices to be available before autodetect [ 6.060977] md: If you don't use raid, use raid=noautodetect [ 6.061829] md: Autodetecting RAID arrays. [ 6.062447] md: autorun ... [ 6.062901] md: ... autorun DONE. [ 6.378527] EXT4-fs (vda): mounted filesystem 4c7a2fd0-800d-4f82-855f-40ffd8994fcb r/w with ordered data mode. Quota mode: disabled. [ 6.381343] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.390759] devtmpfs: mounted [ 6.491482] Freeing unused kernel image (initmem) memory: 468K [ 6.492109] Kernel memory protection not selected by kernel config. [ 6.493167] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 13.532759] udevd[98]: starting version 3.2.14 [ 14.045623] udevd[99]: starting eudev-3.2.14 [ 16.589854] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 16.591036] clcd-pl11x: probe of 10120000.display failed with error -2 [ 16.593622] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 16.597055] amba 10100000.smc: deferred probe pending [ 16.597806] amba 10110000.mpmc: deferred probe pending [ 16.598355] amba 101e0000.sctl: deferred probe pending [ 16.598880] amba 101e1000.watchdog: deferred probe pending [ 16.599427] amba 101f0000.sci: deferred probe pending [ 16.599843] amba 101f4000.spi: deferred probe pending [ 16.600105] amba 1000a000.sci: deferred probe pending [ 16.600368] amba 10120000.display: deferred probe pending [ 35.831522] EXT4-fs (vda): re-mounted 4c7a2fd0-800d-4f82-855f-40ffd8994fcb r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.35-yocto-standard #1 PREEMPT Fri Jun 28 17:07:28 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 7 14:55:40 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-51041e1bef862cb9d31fdefe06f923b27dc4003d qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-GEmbH5MpPw,guid=3f24a3e6aa32fc0522792aed668aac85 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[552]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=533 comm="connman-applet") dbus-daemon[552]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry [ 147.893677] sched: RT throttling activated (matchbox-desktop:569): Gtk-WARNING **: 14:59:55.946: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:569): WARNING **: 14:59:55.993: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format