[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.10.3-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 PREEMPT Tue Aug 6 03:27:40 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 240632K/262144K available (11011K kernel code, 1476K rwdata, 3000K rodata, 480K init, 359K bss, 21512K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 43684 entries in 129 pages [ 0.000000] ftrace: allocated 128 pages with 1 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000218] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000768] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.006107] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.014202] Console: colour dummy device 80x30 [ 0.016289] Calibrating delay loop... 875.72 BogoMIPS (lpj=4378624) [ 0.109208] CPU: Testing write buffer coherency: ok [ 0.110932] pid_max: default: 32768 minimum: 301 [ 0.129847] LSM: initializing lsm=capability,landlock [ 0.130602] landlock: Up and running. [ 0.133538] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.133616] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.204425] Setting up static identity map for 0x8400 - 0x8458 [ 0.206157] rcu: Hierarchical SRCU implementation. [ 0.206229] rcu: Max phase no-delay instances is 1000. [ 0.226348] devtmpfs: initialized [ 0.244868] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.246534] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.246733] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.260230] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.265761] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.289238] platform bridge: Fixed dependency cycle(s) with /vga [ 0.290828] platform vga: Fixed dependency cycle(s) with /bridge [ 0.313260] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.313641] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.313907] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.321076] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.321501] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.331116] Serial: AMBA PL011 UART driver [ 0.342882] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.344781] printk: legacy console [ttyAMA0] enabled [ 0.421295] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.431152] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.440572] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.451626] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.464575] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.839163] raid6: int32x8 gen() 65 MB/s [ 1.179136] raid6: int32x4 gen() 133 MB/s [ 1.519394] raid6: int32x2 gen() 358 MB/s [ 1.858986] raid6: int32x1 gen() 395 MB/s [ 1.859580] raid6: using algorithm int32x1 gen() 395 MB/s [ 2.199059] raid6: .... xor() 216 MB/s, rmw enabled [ 2.199759] raid6: using intx1 recovery algorithm [ 2.206530] SCSI subsystem initialized [ 2.220411] usbcore: registered new interface driver usbfs [ 2.223457] usbcore: registered new interface driver hub [ 2.226247] usbcore: registered new device driver usb [ 2.243742] pps_core: LinuxPPS API ver. 1 registered [ 2.245165] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.261377] PTP clock support registered [ 2.264947] Advanced Linux Sound Architecture Driver Initialized. [ 2.283034] vgaarb: loaded [ 2.286370] clocksource: Switched to clocksource arm,sp804 [ 2.367660] NET: Registered PF_INET protocol family [ 2.372736] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.388768] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.394113] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.399933] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.404746] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.409531] TCP: Hash tables configured (established 2048 bind 2048) [ 2.414144] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.415120] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.418362] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.424222] RPC: Registered named UNIX socket transport module. [ 2.425080] RPC: Registered udp transport module. [ 2.428144] RPC: Registered tcp transport module. [ 2.431166] RPC: Registered tcp-with-tls transport module. [ 2.434647] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.438862] PCI: CLS 0 bytes, default 32 [ 2.451090] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.461698] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.472234] NFS: Registering the id_resolver key type [ 2.507573] Key type id_resolver registered [ 2.510278] Key type id_legacy registered [ 2.519898] Key type cifs.idmap registered [ 2.778069] xor: measuring software checksum speed [ 2.792160] arm4regs : 972 MB/sec [ 2.804904] 8regs : 1227 MB/sec [ 2.816592] 32regs : 1306 MB/sec [ 2.818050] xor: using function: 32regs (1306 MB/sec) [ 2.821133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.825502] io scheduler mq-deadline registered [ 2.829440] io scheduler kyber registered [ 2.832218] io scheduler bfq registered [ 2.850692] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.857300] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.863885] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.871053] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.877393] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.879154] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.885666] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.892023] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.899703] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.905895] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.909066] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.912698] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.916577] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.918230] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.921477] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint [ 2.927744] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x00ff] [ 2.931157] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff] [ 2.934587] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff] [ 2.944262] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 2.945313] pci 0000:00:0d.0: BAR 0 [io 0x0000-0x001f] [ 2.946006] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.947212] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref] [ 2.950483] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.955071] pci 0000:00:0e.0: BAR 0 [io 0x0000-0x001f] [ 2.956061] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.958911] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint [ 2.962721] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 2.965514] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint [ 2.966623] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.967948] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 2.968741] pci 0000:00:11.0: BAR 0 [io 0x0000-0x007f] [ 2.969272] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.971067] PCI: bus0: Fast back to back transfers disabled [ 2.972659] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned [ 2.973583] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned [ 2.974947] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned [ 2.975821] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned [ 2.976909] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned [ 2.977862] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned [ 2.978719] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned [ 2.979514] pci 0000:00:0c.0: BAR 1 [mem 0x50006000-0x500063ff]: assigned [ 2.980228] pci 0000:00:0c.0: BAR 0 [io 0x1000-0x10ff]: assigned [ 2.980947] pci 0000:00:11.0: BAR 0 [io 0x1400-0x147f]: assigned [ 2.981617] pci 0000:00:0d.0: BAR 0 [io 0x1480-0x149f]: assigned [ 2.982286] pci 0000:00:0e.0: BAR 0 [io 0x14a0-0x14bf]: assigned [ 2.984214] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.987896] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.990985] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.992945] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.999407] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 3.007046] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.052555] random: crng init done [ 3.057368] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 3.058755] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.058787] [drm] features: -context_init [ 3.060138] [drm] number of scanouts: 1 [ 3.060550] [drm] number of cap sets: 0 [ 3.075070] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 3.241424] Console: switching to colour frame buffer device 160x50 [ 3.278350] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.281705] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.294036] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.361753] brd: module loaded [ 3.364524] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.373534] virtio_blk virtio3: [vda] 31128 512-byte logical blocks (15.9 MB/15.2 MiB) [ 3.402302] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.421935] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.429747] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.435999] Intel/Sharp Extended Query Table at 0x0031 [ 3.440202] Using buffer write method [ 3.478997] smc91x: not found (-19). [ 3.482039] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.486068] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.528940] rtc-ds1307 0-0068: registered as rtc0 [ 3.541472] rtc-ds1307 0-0068: setting system clock to 2024-09-02T15:40:41 UTC (1725291641) [ 3.554639] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.559670] i2c_dev: i2c /dev entries driver [ 3.564924] versatile reboot driver registered [ 3.572267] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 3.596575] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.610232] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.625932] leds-syscon 10000008.0.led: registered LED (null) [ 3.627867] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.631529] leds-syscon 10000008.1.led: registered LED (null) [ 3.665976] leds-syscon 10000008.2.led: registered LED (null) [ 3.670172] leds-syscon 10000008.3.led: registered LED (null) [ 3.671903] leds-syscon 10000008.4.led: registered LED (null) [ 3.673148] leds-syscon 10000008.5.led: registered LED (null) [ 3.674487] leds-syscon 10000008.6.led: registered LED (null) [ 3.676213] leds-syscon 10000008.7.led: registered LED (null) [ 3.684062] ledtrig-cpu: registered to indicate activity on CPUs [ 3.693011] usbcore: registered new interface driver usbhid [ 3.708245] usbhid: USB HID core driver [ 3.749096] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.755197] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.761859] u32 classifier [ 3.764014] input device check on [ 3.768278] Actions configured [ 3.772136] NET: Registered PF_INET6 protocol family [ 3.789364] Segment Routing with IPv6 [ 3.793115] In-situ OAM (IOAM) with IPv6 [ 3.798287] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.803861] NET: Registered PF_PACKET protocol family [ 3.817755] Bridge firewalling registered [ 3.822257] Key type dns_resolver registered [ 3.833981] NET: Registered PF_VSOCK protocol family [ 3.892398] registered taskstats version 1 [ 3.945330] Key type .fscrypt registered [ 3.950319] Key type fscrypt-provisioning registered [ 3.964719] Btrfs loaded, zoned=no, fsverity=no [ 3.987711] Key type encrypted registered [ 3.998279] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.005451] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.015065] printk: legacy console [netcon0] enabled [ 4.017873] netconsole: network logging started [ 4.360496] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.364456] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.428452] IP-Config: Complete: [ 4.428921] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.430279] host=192.168.7.4, domain=, nis-domain=(none) [ 4.430680] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.430750] nameserver0=8.8.8.8 [ 4.443632] clk: Disabling unused clocks [ 4.453635] ALSA device list: [ 4.455635] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.469054] md: Waiting for all devices to be available before autodetect [ 4.469888] md: If you don't use raid, use raid=noautodetect [ 4.470222] md: Autodetecting RAID arrays. [ 4.470477] md: autorun ... [ 4.470673] md: ... autorun DONE. [ 4.573602] EXT4-fs (vda): mounted filesystem 8cf8d232-93c2-4c42-afa8-01183acf8707 r/w with ordered data mode. Quota mode: disabled. [ 4.583063] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.589042] devtmpfs: mounted [ 4.639460] Freeing unused kernel image (initmem) memory: 480K [ 4.640761] Kernel memory protection not selected by kernel config. [ 4.643604] Run /sbin/init as init process INIT: version 3.04 booting Starting udev [ 6.514503] udevd[98]: starting version 3.2.14 [ 6.720532] udevd[99]: starting eudev-3.2.14 [ 10.838793] EXT4-fs (vda): re-mounted 8cf8d232-93c2-4c42-afa8-01183acf8707 r/w. Quota mode: disabled. [ 14.599467] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.605171] amba 10100000.smc: deferred probe pending: (reason unknown) [ 14.616998] amba 10110000.mpmc: deferred probe pending: (reason unknown) [ 14.620770] amba 101e0000.sctl: deferred probe pending: (reason unknown) [ 14.624412] amba 101e1000.watchdog: deferred probe pending: (reason unknown) [ 14.637073] amba 101f0000.sci: deferred probe pending: (reason unknown) [ 14.640624] amba 101f4000.spi: deferred probe pending: (reason unknown) [ 14.644108] amba 1000a000.sci: deferred probe pending: (reason unknown) [ 14.659143] amba 10120000.display: deferred probe pending: (reason unknown) INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.0+snapshot-bd2159719c08c101a25a5012fc684163135653e6 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: