[ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000135] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.000271] Switching to timer-based delay loop, resolution 16ns [ 0.010299] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.018721] Console: colour dummy device 80x30 [ 0.020364] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.020557] CPU: Testing write buffer coherency: ok [ 0.022116] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.022292] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.022397] pid_max: default: 32768 minimum: 301 [ 0.023888] LSM: initializing lsm=capability,landlock [ 0.024493] landlock: Up and running. [ 0.027644] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.027711] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.053759] /cpus/cpu@0 missing clock-frequency property [ 0.054164] /cpus/cpu@1 missing clock-frequency property [ 0.054216] /cpus/cpu@2 missing clock-frequency property [ 0.054265] /cpus/cpu@3 missing clock-frequency property [ 0.054427] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.070320] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.071256] rcu: Hierarchical SRCU implementation. [ 0.071290] rcu: Max phase no-delay instances is 1000. [ 0.075555] smp: Bringing up secondary CPUs ... [ 0.098221] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.098384] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.104258] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.104311] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.106277] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.106338] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.106827] smp: Brought up 1 node, 4 CPUs [ 0.106910] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.106970] CPU: All CPU(s) started in SVC mode. [ 0.123250] devtmpfs: initialized [ 0.132860] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.150353] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.157268] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.176415] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.182360] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.189283] cpuidle: using governor ladder [ 0.190967] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.191053] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.192636] Serial: AMBA PL011 UART driver [ 0.224948] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.226208] printk: legacy console [ttyAMA0] enabled [ 0.243481] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.248879] cryptd: max_cpu_qlen set to 1000 [ 0.423794] raid6: neonx8 gen() 632 MB/s [ 0.595737] raid6: neonx4 gen() 2227 MB/s [ 0.767851] raid6: neonx2 gen() 1982 MB/s [ 0.940973] raid6: neonx1 gen() 1149 MB/s [ 1.115201] raid6: int32x8 gen() 140 MB/s [ 1.288896] raid6: int32x4 gen() 239 MB/s [ 1.461040] raid6: int32x2 gen() 552 MB/s [ 1.633237] raid6: int32x1 gen() 576 MB/s [ 1.633703] raid6: using algorithm neonx4 gen() 2227 MB/s [ 1.806654] raid6: .... xor() 812 MB/s, rmw enabled [ 1.807081] raid6: using neon recovery algorithm [ 1.812257] SCSI subsystem initialized [ 1.813083] usbcore: registered new interface driver usbfs [ 1.813531] usbcore: registered new interface driver hub [ 1.813854] usbcore: registered new device driver usb [ 1.814305] pps_core: LinuxPPS API ver. 1 registered [ 1.814407] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.814605] PTP clock support registered [ 1.840690] vgaarb: loaded [ 1.846432] clocksource: Switched to clocksource arch_sys_counter [ 1.901446] NET: Registered PF_INET protocol family [ 1.903180] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.913411] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.914060] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.914533] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 1.915118] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.915961] TCP: Hash tables configured (established 4096 bind 4096) [ 1.917567] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.917966] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.919421] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.922715] RPC: Registered named UNIX socket transport module. [ 1.922908] RPC: Registered udp transport module. [ 1.922980] RPC: Registered tcp transport module. [ 1.923045] RPC: Registered tcp-with-tls transport module. [ 1.923119] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.923315] PCI: CLS 0 bytes, default 64 [ 1.928406] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 1.931594] NFS: Registering the id_resolver key type [ 1.932566] Key type id_resolver registered [ 1.932660] Key type id_legacy registered [ 1.936300] Key type cifs.idmap registered [ 2.073412] xor: measuring software checksum speed [ 2.080320] arm4regs : 1569 MB/sec [ 2.085974] 8regs : 1906 MB/sec [ 2.091843] 32regs : 1767 MB/sec [ 2.099373] neon : 1600 MB/sec [ 2.099619] xor: using function: 8regs (1906 MB/sec) [ 2.099847] async_tx: api initialized (async) [ 2.100504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.100869] io scheduler mq-deadline registered [ 2.101089] io scheduler kyber registered [ 2.104053] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 2.104999] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 2.106001] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 2.107052] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 2.108667] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 2.109087] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.109345] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.109585] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 2.110919] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint [ 2.114081] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.114647] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] [ 2.114882] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] [ 2.115133] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.116201] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint [ 2.116587] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 2.117480] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint [ 2.117812] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] [ 2.118047] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.119509] PCI: bus0: Fast back to back transfers disabled [ 2.120875] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned [ 2.121204] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned [ 2.121367] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned [ 2.121496] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned [ 2.121594] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned [ 2.121690] pci 0000:00:01.0: BAR 0 [io 0x1000-0x101f]: assigned [ 2.122716] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 2.129587] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 2.132645] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 2.187964] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 2.189142] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.189202] [drm] features: -context_init [ 2.191622] [drm] number of scanouts: 1 [ 2.191943] [drm] number of cap sets: 0 [ 2.206423] printk: legacy console [hvc0] enabled [ 2.207561] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 2.290243] Console: switching to colour frame buffer device 160x50 [ 2.300679] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.339781] brd: module loaded [ 2.340763] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 2.345097] virtio_blk virtio1: [vda] 897014 512-byte logical blocks (459 MB/438 MiB) [ 2.374881] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.376647] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.380289] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 2.384369] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.384820] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.385462] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 2.393491] hub 1-0:1.0: USB hub found [ 2.394627] hub 1-0:1.0: 4 ports detected [ 2.398570] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.401181] hub 2-0:1.0: USB hub found [ 2.401789] hub 2-0:1.0: 4 ports detected [ 2.409321] rtc-pl031 9010000.pl031: registered as rtc0 [ 2.410857] rtc-pl031 9010000.pl031: setting system clock to 2024-09-06T10:12:04 UTC (1725617524) [ 2.414494] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.418622] usbcore: registered new interface driver usbhid [ 2.419091] usbhid: USB HID core driver [ 2.419790] u32 classifier [ 2.420012] input device check on [ 2.420227] Actions configured [ 2.422302] NET: Registered PF_INET6 protocol family [ 2.431425] Segment Routing with IPv6 [ 2.432016] In-situ OAM (IOAM) with IPv6 [ 2.432902] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.436003] NET: Registered PF_PACKET protocol family [ 2.437140] Bridge firewalling registered [ 2.438302] Key type dns_resolver registered [ 2.439614] NET: Registered PF_VSOCK protocol family [ 2.441280] Registering SWP/SWPB emulation handler [ 2.477198] registered taskstats version 1 [ 2.505146] Key type .fscrypt registered [ 2.506190] Key type fscrypt-provisioning registered [ 2.518860] Btrfs loaded, zoned=no, fsverity=no [ 2.521110] Key type encrypted registered [ 2.522983] printk: legacy console [netcon0] enabled [ 2.523457] netconsole: network logging started [ 2.596302] IP-Config: Complete: [ 2.596752] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 2.597547] host=192.168.7.4, domain=, nis-domain=(none) [ 2.597880] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.597919] nameserver0=8.8.8.8 [ 2.600872] clk: Disabling unused clocks [ 2.604982] md: Waiting for all devices to be available before autodetect [ 2.605452] md: If you don't use raid, use raid=noautodetect [ 2.606089] md: Autodetecting RAID arrays. [ 2.606555] md: autorun ... [ 2.606906] md: ... autorun DONE. [ 2.673738] EXT4-fs (vda): mounted filesystem 0e753a91-65b9-43c2-96a7-86887d6caf57 r/w with ordered data mode. Quota mode: disabled. [ 2.679693] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.684472] devtmpfs: mounted [ 2.737113] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.829945] Freeing unused kernel image (initmem) memory: 2048K [ 2.934832] Run /sbin/init as init process [ 2.995449] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.007211] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 3.167211] usb 1-2: new high-speed USB device number 3 using xhci_hcd INIT: version 3.04 booting [ 3.383402] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 3.469267] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 5.126743] udevd[134]: starting version 3.2.14 [ 5.294274] udevd[135]: starting eudev-3.2.14 [ 7.938261] EXT4-fs (vda): re-mounted 0e753a91-65b9-43c2-96a7-86887d6caf57 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.10.3-yocto-standard #1 SMP PREEMPT Tue Aug 6 03:27:51 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, Starting rpcbind daemon...(**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 6 10:12:18 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-0968311965ff237b1625972b703bb3bb831566e9 qemuarm /dev/hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-5pH1UYDX2R,guid=cff0a786911906fbb5680af166dad585 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dbus-daemon[653]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=635 comm="connman-applet") matchbox-wm: X error warning (0xc00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[653]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:670): Gtk-WARNING **: 10:12:23.704: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:670): WARNING **: 10:12:23.707: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format [ 116.503463] eth0: bad gso: type: 1, size: 1448