[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.10.3-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 PREEMPT Tue Aug 6 03:27:40 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 240632K/262144K available (11011K kernel code, 1476K rwdata, 3000K rodata, 480K init, 359K bss, 21512K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 43684 entries in 129 pages [ 0.000000] ftrace: allocated 128 pages with 1 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000127] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000442] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.003315] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.005405] Console: colour dummy device 80x30 [ 0.006570] Calibrating delay loop... 1882.52 BogoMIPS (lpj=9412608) [ 0.229575] CPU: Testing write buffer coherency: ok [ 0.230618] pid_max: default: 32768 minimum: 301 [ 0.231546] LSM: initializing lsm=capability,landlock [ 0.231956] landlock: Up and running. [ 0.233726] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.233770] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.267938] Setting up static identity map for 0x8400 - 0x8458 [ 0.268713] rcu: Hierarchical SRCU implementation. [ 0.268754] rcu: Max phase no-delay instances is 1000. [ 0.277782] devtmpfs: initialized [ 0.286953] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.287724] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.287817] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.294927] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.297714] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.314522] platform bridge: Fixed dependency cycle(s) with /vga [ 0.315236] platform vga: Fixed dependency cycle(s) with /bridge [ 0.325116] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.325297] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.325425] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.328361] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.328536] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.331990] Serial: AMBA PL011 UART driver [ 0.337391] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.338376] printk: legacy console [ttyAMA0] enabled [ 0.368200] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.370912] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.372523] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.373797] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.377458] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.729424] raid6: int32x8 gen() 109 MB/s [ 1.069422] raid6: int32x4 gen() 231 MB/s [ 1.347412] raid6: int32x2 gen() 670 MB/s [ 1.509530] raid6: int32x1 gen() 632 MB/s [ 1.509940] raid6: using algorithm int32x2 gen() 670 MB/s [ 1.679601] raid6: .... xor() 422 MB/s, rmw enabled [ 1.679962] raid6: using intx1 recovery algorithm [ 1.683323] SCSI subsystem initialized [ 1.684383] usbcore: registered new interface driver usbfs [ 1.684893] usbcore: registered new interface driver hub [ 1.685346] usbcore: registered new device driver usb [ 1.688301] pps_core: LinuxPPS API ver. 1 registered [ 1.688627] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.689202] PTP clock support registered [ 1.691432] Advanced Linux Sound Architecture Driver Initialized. [ 1.702790] vgaarb: loaded [ 1.705900] clocksource: Switched to clocksource arm,sp804 [ 1.748858] NET: Registered PF_INET protocol family [ 1.750099] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.755956] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 1.756547] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.757043] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.757527] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 1.758017] TCP: Hash tables configured (established 2048 bind 2048) [ 1.759241] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.759772] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.761489] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.764298] RPC: Registered named UNIX socket transport module. [ 1.764706] RPC: Registered udp transport module. [ 1.764979] RPC: Registered tcp transport module. [ 1.765241] RPC: Registered tcp-with-tls transport module. [ 1.765540] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.766135] PCI: CLS 0 bytes, default 32 [ 1.770150] NetWinder Floating Point Emulator V0.97 (double precision) [ 1.773418] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.777696] NFS: Registering the id_resolver key type [ 1.780013] Key type id_resolver registered [ 1.780528] Key type id_legacy registered [ 1.783835] Key type cifs.idmap registered [ 1.933287] xor: measuring software checksum speed [ 1.939803] arm4regs : 1669 MB/sec [ 1.945162] 8regs : 1989 MB/sec [ 1.950811] 32regs : 1915 MB/sec [ 1.951134] xor: using function: 8regs (1989 MB/sec) [ 1.951887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 1.952434] io scheduler mq-deadline registered [ 1.952760] io scheduler kyber registered [ 1.953246] io scheduler bfq registered [ 1.959983] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 1.961199] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 1.962404] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 1.963484] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 1.964488] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 1.965354] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 1.966417] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 1.966963] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 1.968157] versatile-pci 10001000.pci: PCI core found (slot 11) [ 1.969644] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 1.970187] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.970714] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.971083] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 1.971485] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 1.973444] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint [ 1.974477] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x00ff] [ 1.974853] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff] [ 1.975194] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff] [ 1.978072] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 1.978591] pci 0000:00:0d.0: BAR 0 [io 0x0000-0x001f] [ 1.978952] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 1.979363] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref] [ 1.980100] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 1.980600] pci 0000:00:0e.0: BAR 0 [io 0x0000-0x001f] [ 1.980915] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 1.981627] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint [ 1.982111] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 1.982785] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint [ 1.983282] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 1.984009] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 1.984498] pci 0000:00:11.0: BAR 0 [io 0x0000-0x007f] [ 1.984809] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 1.986243] PCI: bus0: Fast back to back transfers disabled [ 1.987466] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned [ 1.988067] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned [ 1.988620] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned [ 1.989079] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned [ 1.989495] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned [ 1.989929] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned [ 1.990361] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned [ 1.990743] pci 0000:00:0c.0: BAR 1 [mem 0x50006000-0x500063ff]: assigned [ 1.991133] pci 0000:00:0c.0: BAR 0 [io 0x1000-0x10ff]: assigned [ 1.991491] pci 0000:00:11.0: BAR 0 [io 0x1400-0x147f]: assigned [ 1.991831] pci 0000:00:0d.0: BAR 0 [io 0x1480-0x149f]: assigned [ 1.992175] pci 0000:00:0e.0: BAR 0 [io 0x14a0-0x14bf]: assigned [ 1.993424] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 1.995481] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 1.997798] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 1.998881] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.000935] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.002957] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.013524] random: crng init done [ 2.015599] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.016595] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.016630] [drm] features: -context_init [ 2.017874] [drm] number of scanouts: 1 [ 2.018142] [drm] number of cap sets: 0 [ 2.027646] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 2.093979] Console: switching to colour frame buffer device 160x50 [ 2.111581] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.113295] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 2.114948] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 2.157073] brd: module loaded [ 2.157710] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 2.161173] virtio_blk virtio3: [vda] 973684 512-byte logical blocks (499 MB/475 MiB) [ 2.172130] physmap-flash 34000000.flash: versatile/realview flash protection [ 2.185625] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 2.188125] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 2.189286] Intel/Sharp Extended Query Table at 0x0031 [ 2.190283] Using buffer write method [ 2.208898] smc91x: not found (-19). [ 2.209649] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 2.210335] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 2.239006] rtc-ds1307 0-0068: registered as rtc0 [ 2.248285] rtc-ds1307 0-0068: setting system clock to 2024-09-07T20:21:18 UTC (1725740478) [ 2.252219] rtc-pl031 101e8000.rtc: registered as rtc1 [ 2.252999] i2c_dev: i2c /dev entries driver [ 2.253990] versatile reboot driver registered [ 2.255705] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.261689] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 2.264313] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 2.271863] leds-syscon 10000008.0.led: registered LED (null) [ 2.272961] leds-syscon 10000008.1.led: registered LED (null) [ 2.273985] leds-syscon 10000008.2.led: registered LED (null) [ 2.274714] leds-syscon 10000008.3.led: registered LED (null) [ 2.275323] leds-syscon 10000008.4.led: registered LED (null) [ 2.276591] leds-syscon 10000008.5.led: registered LED (null) [ 2.277220] leds-syscon 10000008.6.led: registered LED (null) [ 2.277829] leds-syscon 10000008.7.led: registered LED (null) [ 2.278719] ledtrig-cpu: registered to indicate activity on CPUs [ 2.280281] usbcore: registered new interface driver usbhid [ 2.280623] usbhid: USB HID core driver [ 2.301610] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 2.302131] aaci-pl041 10004000.aaci: FIFO 512 entries [ 2.303145] u32 classifier [ 2.303333] input device check on [ 2.303544] Actions configured [ 2.305355] NET: Registered PF_INET6 protocol family [ 2.311646] Segment Routing with IPv6 [ 2.312095] In-situ OAM (IOAM) with IPv6 [ 2.313046] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.315573] NET: Registered PF_PACKET protocol family [ 2.317916] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 2.324018] Bridge firewalling registered [ 2.324895] Key type dns_resolver registered [ 2.325626] NET: Registered PF_VSOCK protocol family [ 2.353143] registered taskstats version 1 [ 2.377571] Key type .fscrypt registered [ 2.377848] Key type fscrypt-provisioning registered [ 2.382795] Btrfs loaded, zoned=no, fsverity=no [ 2.393919] Key type encrypted registered [ 2.397122] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 2.399176] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 2.400574] printk: legacy console [netcon0] enabled [ 2.400950] netconsole: network logging started [ 2.950653] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 2.957808] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.003565] IP-Config: Complete: [ 3.004067] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 3.004994] host=192.168.7.4, domain=, nis-domain=(none) [ 3.005327] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.005364] nameserver0=8.8.8.8 [ 3.008511] clk: Disabling unused clocks [ 3.009057] ALSA device list: [ 3.009278] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.013440] md: Waiting for all devices to be available before autodetect [ 3.013849] md: If you don't use raid, use raid=noautodetect [ 3.014195] md: Autodetecting RAID arrays. [ 3.014455] md: autorun ... [ 3.014644] md: ... autorun DONE. [ 3.083112] EXT4-fs (vda): mounted filesystem dc9c7c85-f49b-498d-a32b-b9efa6ccd8c1 r/w with ordered data mode. Quota mode: disabled. [ 3.084048] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.086366] devtmpfs: mounted [ 3.125487] Freeing unused kernel image (initmem) memory: 480K [ 3.131760] Kernel memory protection not selected by kernel config. [ 3.132507] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 4.621407] udevd[109]: starting version 3.2.14 [ 4.730882] udevd[110]: starting eudev-3.2.14 [ 9.528525] EXT4-fs (vda): re-mounted dc9c7c85-f49b-498d-a32b-b9efa6ccd8c1 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager [ 13.302483] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 13.312984] amba 10100000.smc: deferred probe pending: (reason unknown) [ 13.313489] amba 10110000.mpmc: deferred probe pending: (reason unknown) [ 13.313773] amba 101e0000.sctl: deferred probe pending: (reason unknown) [ 13.314044] amba 101e1000.watchdog: deferred probe pending: (reason unknown) [ 13.314334] amba 101f0000.sci: deferred probe pending: (reason unknown) [ 13.314608] amba 101f4000.spi: deferred probe pending: (reason unknown) [ 13.314883] amba 1000a000.sci: deferred probe pending: (reason unknown) [ 13.315150] amba 10120000.display: deferred probe pending: (reason unknown) Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.10.3-yocto-standard #1 PREEMPT Tue Aug 6 03:27:40 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 7 20:21:30 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-185fd2b28c98c3e1abe6494e03001f4a196d122e qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-7tEFFY8mVR,guid=6ba2f0cb1dca9d6199ad694f66dcb5d3 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[546]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=526 comm="connman-applet") dbus-daemon[546]: Successfully activated service 'org.a11y.atspi.Registry' matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:562): Gtk-WARNING **: 20:22:31.285: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:562): WARNING **: 20:22:31.368: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format [ 165.533160] eth0: bad gso: type: 1, size: 1448 [ 278.330840] eth0: bad gso: type: 1, size: 1448 [ 282.422441] eth0: bad gso: type: 1, size: 1448