[    0.000000] Linux version 6.10.8-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Thu Sep  5 19:44:46 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238376K/262140K available (14877K kernel code, 1521K rwdata, 2892K rodata, 412K init, 413K bss, 23764K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945393021 ns
[    0.000138] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421790204ns
[    0.006635] Console: colour dummy device 80x25
[    0.007341] printk: legacy console [tty0] enabled
[    0.008023] printk: legacy bootconsole [uart8250] disabled
[    0.000000] Linux version 6.10.8-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Thu Sep  5 19:44:46 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238376K/262140K available (14877K kernel code, 1521K rwdata, 2892K rodata, 412K init, 413K bss, 23764K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945393021 ns
[    0.000138] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421790204ns
[    0.006635] Console: colour dummy device 80x25
[    0.007341] printk: legacy console [tty0] enabled
[    0.008023] printk: legacy bootconsole [uart8250] disabled
[    0.012012] Calibrating delay loop... 1889.07 BogoMIPS (lpj=9445376)
[    0.070957] pid_max: default: 32768 minimum: 301
[    0.071971] LSM: initializing lsm=capability,landlock
[    0.072399] landlock: Up and running.
[    0.074504] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.074603] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.100633] Performance counters: No available PMU.
[    0.101698] rcu: Hierarchical SRCU implementation.
[    0.101744] rcu: 	Max phase no-delay instances is 1000.
[    0.106392] smp: Bringing up secondary CPUs ...
[    0.106547] smp: Brought up 1 node, 1 CPU
[    0.116015] devtmpfs: initialized
[    0.120760] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.120926] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.127424] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.141081] LOGIC PIO: addr 0x00000070 not registered in io_range_list
[    0.493045] raid6: int32x8  gen()   489 MB/s
[    0.775116] raid6: int32x4  gen()   979 MB/s
[    0.945014] raid6: int32x2  gen()  1191 MB/s
[    1.116242] raid6: int32x1  gen()   807 MB/s
[    1.116456] raid6: using algorithm int32x2 gen() 1191 MB/s
[    1.288003] raid6: .... xor() 642 MB/s, rmw enabled
[    1.288118] raid6: using intx1 recovery algorithm
[    1.290258] SCSI subsystem initialized
[    1.290617] usbcore: registered new interface driver usbfs
[    1.290820] usbcore: registered new interface driver hub
[    1.290945] usbcore: registered new device driver usb
[    1.291160] pps_core: LinuxPPS API ver. 1 registered
[    1.291190] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.291277] PTP clock support registered
[    1.303425] PCI host bridge to bus 0000:00
[    1.303682] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.304018] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.304123] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.305176] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 conventional PCI endpoint
[    1.305728] pci 0000:00:00.0: [Firmware Bug]: BAR 0: invalid; can't size
[    1.305822] pci 0000:00:00.0: [Firmware Bug]: BAR 1: invalid; can't size
[    1.305902] pci 0000:00:00.0: [Firmware Bug]: BAR 2: invalid; can't size
[    1.305941] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
[    1.305984] pci 0000:00:00.0: [Firmware Bug]: BAR 4: invalid; can't size
[    1.306027] pci 0000:00:00.0: [Firmware Bug]: BAR 5: invalid; can't size
[    1.307884] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 conventional PCI endpoint
[    1.308362] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 conventional PCI endpoint
[    1.308572] pci 0000:00:0a.1: BAR 4 [io  0x0000-0x000f]
[    1.308656] pci 0000:00:0a.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    1.308695] pci 0000:00:0a.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    1.308744] pci 0000:00:0a.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    1.308780] pci 0000:00:0a.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    1.309005] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 conventional PCI endpoint
[    1.309108] pci 0000:00:0a.2: BAR 4 [io  0x0000-0x001f]
[    1.309472] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    1.309846] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.309937] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.310265] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    1.310331] pci 0000:00:12.0: BAR 0 [mem 0x00000000-0x00ffffff pref]
[    1.310412] pci 0000:00:12.0: BAR 2 [mem 0x00000000-0x00000fff]
[    1.310467] pci 0000:00:12.0: ROM [mem 0x00000000-0x0000ffff pref]
[    1.310751] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    1.310819] pci 0000:00:13.0: BAR 0 [io  0x0000-0x001f]
[    1.310895] pci 0000:00:13.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.310963] pci 0000:00:13.0: ROM [mem 0x00000000-0x0003ffff pref]
[    1.311184] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.311248] pci 0000:00:14.0: BAR 0 [io  0x0000-0x001f]
[    1.311308] pci 0000:00:14.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.311522] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    1.311582] pci 0000:00:15.0: BAR 0 [io  0x0000-0x007f]
[    1.311643] pci 0000:00:15.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.312088] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.313099] pci 0000:00:12.0: BAR 0 [mem 0x10000000-0x10ffffff pref]: assigned
[    1.313310] pci 0000:00:13.0: ROM [mem 0x11000000-0x1103ffff pref]: assigned
[    1.313376] pci 0000:00:12.0: ROM [mem 0x11040000-0x1104ffff pref]: assigned
[    1.313420] pci 0000:00:13.0: BAR 4 [mem 0x11050000-0x11053fff 64bit pref]: assigned
[    1.313507] pci 0000:00:14.0: BAR 4 [mem 0x11054000-0x11057fff 64bit pref]: assigned
[    1.313558] pci 0000:00:15.0: BAR 4 [mem 0x11058000-0x1105bfff 64bit pref]: assigned
[    1.313620] pci 0000:00:12.0: BAR 2 [mem 0x1105c000-0x1105cfff]: assigned
[    1.313675] pci 0000:00:15.0: BAR 0 [io  0x1080-0x10ff]: assigned
[    1.313714] pci 0000:00:0a.2: BAR 4 [io  0x1040-0x105f]: assigned
[    1.313742] pci 0000:00:13.0: BAR 0 [io  0x1060-0x107f]: assigned
[    1.313776] pci 0000:00:14.0: BAR 0 [io  0x1400-0x141f]: assigned
[    1.313810] pci 0000:00:0a.1: BAR 4 [io  0x1420-0x142f]: assigned
[    1.315292] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.315370] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.315434] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.315518] vgaarb: loaded
[    1.316942] clocksource: Switched to clocksource MIPS
[    1.334993] NET: Registered PF_INET protocol family
[    1.335855] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.340913] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.341023] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.341100] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.341239] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.341359] TCP: Hash tables configured (established 2048 bind 2048)
[    1.342281] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.342467] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.343577] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.345371] RPC: Registered named UNIX socket transport module.
[    1.345436] RPC: Registered udp transport module.
[    1.345462] RPC: Registered tcp transport module.
[    1.345487] RPC: Registered tcp-with-tls transport module.
[    1.345511] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.346049] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.346760] PCI: CLS 0 bytes, default 16
[    1.352677] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.354867] NFS: Registering the id_resolver key type
[    1.355795] Key type id_resolver registered
[    1.355844] Key type id_legacy registered
[    1.357220] Key type cifs.idmap registered
[    1.586208] xor: measuring software checksum speed
[    1.591955]    8regs           :  1825 MB/sec
[    1.598163]    8regs_prefetch  :  1618 MB/sec
[    1.603652]    32regs          :  1827 MB/sec
[    1.609678]    32regs_prefetch :  1676 MB/sec
[    1.609741] xor: using function: 32regs (1827 MB/sec)
[    1.610043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.610184] io scheduler mq-deadline registered
[    1.610247] io scheduler kyber registered
[    1.613834] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.615968] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.616933] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.618454] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.623902] printk: legacy console [ttyS0] disabled
[    1.646997] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.647082] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.648315] printk: legacy console [ttyS0] enabled
[    1.738129] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.738731] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    1.739036] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    1.745120] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    1.746865] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    1.747945] [drm] Found bochs VGA, ID 0xb0c5.
[    1.748300] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    1.751500] [drm] Found EDID data blob.
[    1.756298] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    1.793820] Console: switching to colour frame buffer device 160x50
[    1.800929] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.832950] brd: module loaded
[    1.833714] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    1.838062] virtio_blk virtio2: [vda] 1161756 512-byte logical blocks (595 MB/567 MiB)
[    1.854098] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    1.855246] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    1.862125] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    1.868472] hub 1-0:1.0: USB hub found
[    1.869309] hub 1-0:1.0: 2 ports detected
[    1.874227] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.875348] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.878265] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.880382] usbcore: registered new interface driver usbhid
[    1.880849] usbhid: USB HID core driver
[    1.881530] u32 classifier
[    1.881784]     input device check on
[    1.882098]     Actions configured
[    1.883846] NET: Registered PF_INET6 protocol family
[    1.890790] Segment Routing with IPv6
[    1.892440] In-situ OAM (IOAM) with IPv6
[    1.893379] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.895811] NET: Registered PF_PACKET protocol family
[    1.896913] Bridge firewalling registered
[    1.898095] Key type dns_resolver registered
[    1.898803] NET: Registered PF_VSOCK protocol family
[    1.914309] failed when register_sysctl_sz sched_core_sysctls to kernel
[    1.919607] failed when register_sysctl_sz sched_fair_sysctls to kernel
[    1.935433] registered taskstats version 1
[    1.948487] Key type .fscrypt registered
[    1.953072] Key type fscrypt-provisioning registered
[    1.970235] Btrfs loaded, zoned=no, fsverity=no
[    1.988136] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.997628] Key type encrypted registered
[    2.001871] printk: legacy console [netcon0] enabled
[    2.004417] netconsole: network logging started
[    2.167192] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.441465] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    2.450261] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    2.639018] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.707488] IP-Config: Complete:
[    2.716716]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    2.724240]      host=192.168.7.2, domain=, nis-domain=(none)
[    2.736660]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.736788]      nameserver0=8.8.8.8
[    2.761434] clk: Disabling unused clocks
[    2.786688] md: Waiting for all devices to be available before autodetect
[    2.793389] md: If you don't use raid, use raid=noautodetect
[    2.814738] md: Autodetecting RAID arrays.
[    2.819828] md: autorun ...
[    2.822339] md: ... autorun DONE.
[    2.861396] EXT4-fs (vda): mounted filesystem 6cee1f88-3bd5-4fd4-a968-30cffdc2d710 r/w with ordered data mode. Quota mode: disabled.
[    2.866909] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.881824] devtmpfs: mounted
[    2.939984] Freeing unused kernel image (initmem) memory: 412K
[    2.942756] This architecture does not have kernel memory protection.
[    2.945549] Run /sbin/init as init process
[    2.973529] process '/sbin/init.sysvinit' started with executable stack
[    4.432495] udevd[102]: starting version 3.2.14
[    4.489879] udevd[103]: starting eudev-3.2.14
[    8.747364] EXT4-fs (vda): re-mounted 6cee1f88-3bd5-4fd4-a968-30cffdc2d710 r/w. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
bootlogd: writing to console: Input/output error
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: 
X.Org X Server 1.21.1dropbear.
.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.10.8-yocto-standard #1 SMP PREEMPT Thu Sep  5 19:44:46 UTC 2024 mips
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 11 07:31:39 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: pci id for fd 10: 1234:1111, driver (null)
MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.0+snapshot-ca4774438fbadf8d0e8f81a3cc7e6637f3486c46 qemumips /dev/ttyS0

qemumips login: 