[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.10.8-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 PREEMPT Thu Sep 5 19:44:37 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 240632K/262144K available (11021K kernel code, 1478K rwdata, 3000K rodata, 472K init, 357K bss, 21512K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 43702 entries in 129 pages [ 0.000000] ftrace: allocated 129 pages with 2 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000209] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000727] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.005550] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.013635] Console: colour dummy device 80x30 [ 0.015869] Calibrating delay loop... 695.09 BogoMIPS (lpj=3475456) [ 0.120848] CPU: Testing write buffer coherency: ok [ 0.123344] pid_max: default: 32768 minimum: 301 [ 0.125953] LSM: initializing lsm=capability,landlock [ 0.126982] landlock: Up and running. [ 0.131875] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.132015] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.209837] Setting up static identity map for 0x8400 - 0x8458 [ 0.212791] rcu: Hierarchical SRCU implementation. [ 0.212945] rcu: Max phase no-delay instances is 1000. [ 0.239007] devtmpfs: initialized [ 0.259208] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.261012] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.261195] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.273992] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.279710] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.301841] platform bridge: Fixed dependency cycle(s) with /vga [ 0.303189] platform vga: Fixed dependency cycle(s) with /bridge [ 0.322769] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.323109] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.323343] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.329916] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.330308] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.337346] Serial: AMBA PL011 UART driver [ 0.350669] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.352888] printk: legacy console [ttyAMA0] enabled [ 0.415405] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.419728] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.422510] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.424834] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.432176] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.799037] raid6: int32x8 gen() 55 MB/s [ 1.138925] raid6: int32x4 gen() 85 MB/s [ 1.478997] raid6: int32x2 gen() 414 MB/s [ 1.818945] raid6: int32x1 gen() 438 MB/s [ 1.819627] raid6: using algorithm int32x1 gen() 438 MB/s [ 2.159717] raid6: .... xor() 89 MB/s, rmw enabled [ 2.160617] raid6: using intx1 recovery algorithm [ 2.166393] SCSI subsystem initialized [ 2.179649] usbcore: registered new interface driver usbfs [ 2.180851] usbcore: registered new interface driver hub [ 2.181859] usbcore: registered new device driver usb [ 2.188018] pps_core: LinuxPPS API ver. 1 registered [ 2.188555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.199362] PTP clock support registered [ 2.203055] Advanced Linux Sound Architecture Driver Initialized. [ 2.241944] vgaarb: loaded [ 2.246852] clocksource: Switched to clocksource arm,sp804 [ 2.575181] NET: Registered PF_INET protocol family [ 2.577826] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.587743] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.588652] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.589414] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.590186] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.590967] TCP: Hash tables configured (established 2048 bind 2048) [ 2.592974] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.593791] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.596489] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.601849] RPC: Registered named UNIX socket transport module. [ 2.602505] RPC: Registered udp transport module. [ 2.602951] RPC: Registered tcp transport module. [ 2.603377] RPC: Registered tcp-with-tls transport module. [ 2.603872] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.604605] PCI: CLS 0 bytes, default 32 [ 2.611781] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.617790] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.623562] NFS: Registering the id_resolver key type [ 2.625457] Key type id_resolver registered [ 2.625890] Key type id_legacy registered [ 2.631863] Key type cifs.idmap registered [ 2.868724] xor: measuring software checksum speed [ 2.882396] arm4regs : 804 MB/sec [ 2.893308] 8regs : 1001 MB/sec [ 2.905070] 32regs : 928 MB/sec [ 2.905812] xor: using function: 8regs (1001 MB/sec) [ 2.908116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.909226] io scheduler mq-deadline registered [ 2.909876] io scheduler kyber registered [ 2.910941] io scheduler bfq registered [ 2.926175] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.930239] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.933605] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.936538] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.940117] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.942216] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.944144] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.945242] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.948626] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.952200] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.953432] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.954578] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.955449] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.956285] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.961664] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint [ 2.964078] pci 0000:00:0c.0: BAR 0 [io 0x0000-0x00ff] [ 2.964852] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff] [ 2.965542] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff] [ 2.972379] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 2.973578] pci 0000:00:0d.0: BAR 0 [io 0x0000-0x001f] [ 2.974379] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.975232] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref] [ 2.977382] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 2.978411] pci 0000:00:0e.0: BAR 0 [io 0x0000-0x001f] [ 2.979082] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.980820] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint [ 2.981780] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 2.983266] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint [ 2.984310] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.986116] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 2.987475] pci 0000:00:11.0: BAR 0 [io 0x0000-0x007f] [ 2.988188] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 2.991931] PCI: bus0: Fast back to back transfers disabled [ 2.994698] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned [ 2.995902] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned [ 2.997399] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned [ 2.998402] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned [ 2.999286] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned [ 3.000197] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned [ 3.001135] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned [ 3.001976] pci 0000:00:0c.0: BAR 1 [mem 0x50006000-0x500063ff]: assigned [ 3.002866] pci 0000:00:0c.0: BAR 0 [io 0x1000-0x10ff]: assigned [ 3.003649] pci 0000:00:11.0: BAR 0 [io 0x1400-0x147f]: assigned [ 3.004392] pci 0000:00:0d.0: BAR 0 [io 0x1480-0x149f]: assigned [ 3.005164] pci 0000:00:0e.0: BAR 0 [io 0x14a0-0x14bf]: assigned [ 3.008465] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 3.013432] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 3.019310] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 3.021826] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 3.025247] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 3.031029] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.060073] random: crng init done [ 3.065098] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 3.067022] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.067114] [drm] features: -context_init [ 3.069046] [drm] number of scanouts: 1 [ 3.069565] [drm] number of cap sets: 0 [ 3.092872] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 3.275408] Console: switching to colour frame buffer device 160x50 [ 3.330758] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.339600] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.343740] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.445703] brd: module loaded [ 3.452173] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.460894] virtio_blk virtio3: [vda] 973808 512-byte logical blocks (499 MB/475 MiB) [ 3.487103] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.499900] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.502990] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.504498] Intel/Sharp Extended Query Table at 0x0031 [ 3.506217] Using buffer write method [ 3.534735] smc91x: not found (-19). [ 3.535842] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.537986] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.570463] rtc-ds1307 0-0068: registered as rtc0 [ 3.579387] rtc-ds1307 0-0068: setting system clock to 2024-09-16T21:38:59 UTC (1726522739) [ 3.585757] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.588379] i2c_dev: i2c /dev entries driver [ 3.590041] versatile reboot driver registered [ 3.592912] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 3.615539] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.617307] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.620377] leds-syscon 10000008.0.led: registered LED (null) [ 3.622158] leds-syscon 10000008.1.led: registered LED (null) [ 3.623969] leds-syscon 10000008.2.led: registered LED (null) [ 3.625069] leds-syscon 10000008.3.led: registered LED (null) [ 3.625982] leds-syscon 10000008.4.led: registered LED (null) [ 3.627386] leds-syscon 10000008.5.led: registered LED (null) [ 3.628348] leds-syscon 10000008.6.led: registered LED (null) [ 3.629289] leds-syscon 10000008.7.led: registered LED (null) [ 3.630652] ledtrig-cpu: registered to indicate activity on CPUs [ 3.633642] usbcore: registered new interface driver usbhid [ 3.634194] usbhid: USB HID core driver [ 3.650122] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.676283] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.677995] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.680384] u32 classifier [ 3.680751] input device check on [ 3.681159] Actions configured [ 3.684459] NET: Registered PF_INET6 protocol family [ 3.695309] Segment Routing with IPv6 [ 3.696020] In-situ OAM (IOAM) with IPv6 [ 3.698598] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.702952] NET: Registered PF_PACKET protocol family [ 3.704130] Bridge firewalling registered [ 3.705586] Key type dns_resolver registered [ 3.707522] NET: Registered PF_VSOCK protocol family [ 3.751090] registered taskstats version 1 [ 3.791690] Key type .fscrypt registered [ 3.792212] Key type fscrypt-provisioning registered [ 3.803249] Btrfs loaded, zoned=no, fsverity=no [ 3.828044] Key type encrypted registered [ 3.832914] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.835846] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.838491] printk: legacy console [netcon0] enabled [ 3.839089] netconsole: network logging started [ 4.303127] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.319403] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.377830] IP-Config: Complete: [ 4.378443] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.379900] host=192.168.7.4, domain=, nis-domain=(none) [ 4.380581] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.380671] nameserver0=8.8.8.8 [ 4.387906] clk: Disabling unused clocks [ 4.388923] ALSA device list: [ 4.389295] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.396223] md: Waiting for all devices to be available before autodetect [ 4.398331] md: If you don't use raid, use raid=noautodetect [ 4.399040] md: Autodetecting RAID arrays. [ 4.399471] md: autorun ... [ 4.399778] md: ... autorun DONE. [ 4.517946] EXT4-fs (vda): mounted filesystem 2a344112-a2e9-45bf-8765-c26313a6f3b8 r/w with ordered data mode. Quota mode: disabled. [ 4.520179] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.524744] devtmpfs: mounted [ 4.611453] Freeing unused kernel image (initmem) memory: 472K [ 4.612157] Kernel memory protection not selected by kernel config. [ 4.613035] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 7.191091] udevd[109]: starting version 3.2.14 [ 7.384705] udevd[110]: starting eudev-3.2.14 [ 14.569586] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.572202] amba 10100000.smc: deferred probe pending: (reason unknown) [ 14.573018] amba 10110000.mpmc: deferred probe pending: (reason unknown) [ 14.573670] amba 101e0000.sctl: deferred probe pending: (reason unknown) [ 14.574314] amba 101e1000.watchdog: deferred probe pending: (reason unknown) [ 14.575023] amba 101f0000.sci: deferred probe pending: (reason unknown) [ 14.575662] amba 101f4000.spi: deferred probe pending: (reason unknown) [ 14.576299] amba 1000a000.sci: deferred probe pending: (reason unknown) [ 14.633051] amba 10120000.display: deferred probe pending: (reason unknown) [ 19.560116] EXT4-fs (vda): re-mounted 2a344112-a2e9-45bf-8765-c26313a6f3b8 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.10.8-yocto-standard #1 PREEMPT Thu Sep 5 19:44:37 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 16 21:39:28 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0+snapshot-1e6e8cb896934cf52e850ddd04be379ad5ad8a81 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-eZUiiEDQqA,guid=8e55938d20c582dd3e96519858bd4902 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[558]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=539 comm="connman-applet") dbus-daemon[558]: Successfully activated service 'org.a11y.atspi.Registry' matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry (matchbox-desktop:579): Gtk-WARNING **: 21:42:05.051: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:579): WARNING **: 21:42:05.079: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format