
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 17 pages/cpu s40788 r8192 d20652 u69632
[    0.000000] Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 194880
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 757000K/786432K available (10240K kernel code, 1429K rwdata, 2764K rodata, 2048K init, 366K bss, 29432K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 42034 entries in 124 pages
[    0.000000] ftrace: allocated 124 pages with 5 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[    0.000087] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
[    0.000175] Switching to timer-based delay loop, resolution 16ns
[    0.008770] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.012733] Console: colour dummy device 80x30
[    0.013433] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[    0.013665] CPU: Testing write buffer coherency: ok
[    0.014468] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.014562] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.014614] pid_max: default: 32768 minimum: 301
[    0.015397] LSM: initializing lsm=capability,landlock,integrity
[    0.015685] landlock: Up and running.
[    0.017122] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.017151] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.031028] /cpus/cpu@0 missing clock-frequency property
[    0.031211] /cpus/cpu@1 missing clock-frequency property
[    0.031240] /cpus/cpu@2 missing clock-frequency property
[    0.032469] /cpus/cpu@3 missing clock-frequency property
[    0.032558] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.038446] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.038690] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.039017] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.039521] Setting up static identity map for 0x40200000 - 0x40200060
[    0.040149] rcu: Hierarchical SRCU implementation.
[    0.040172] rcu: 	Max phase no-delay instances is 1000.
[    0.043424] smp: Bringing up secondary CPUs ...
[    0.046090] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.046170] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.050350] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.050386] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.052022] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.052062] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.052801] smp: Brought up 1 node, 4 CPUs
[    0.052853] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.052891] CPU: All CPU(s) started in SVC mode.
[    0.064632] devtmpfs: initialized
[    0.071271] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.084497] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.085043] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.096090] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.098565] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.102798] cpuidle: using governor ladder
[    0.104843] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.104918] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.105885] Serial: AMBA PL011 UART driver
[    0.124469] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.125267] printk: console [ttyAMA0] enabled
[    0.143535] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.156933] cryptd: max_cpu_qlen set to 1000
[    0.324816] raid6: neonx8   gen()   590 MB/s
[    0.495542] raid6: neonx4   gen()  2179 MB/s
[    0.666551] raid6: neonx2   gen()  1945 MB/s
[    0.837551] raid6: neonx1   gen()  1092 MB/s
[    1.008399] raid6: int32x8  gen()   255 MB/s
[    1.179840] raid6: int32x4  gen()   229 MB/s
[    1.351286] raid6: int32x2  gen()   285 MB/s
[    1.521508] raid6: int32x1  gen()   482 MB/s
[    1.521771] raid6: using algorithm neonx4 gen() 2179 MB/s
[    1.692426] raid6: .... xor() 1483 MB/s, rmw enabled
[    1.692734] raid6: using neon recovery algorithm
[    1.695415] SCSI subsystem initialized
[    1.696084] usbcore: registered new interface driver usbfs
[    1.696518] usbcore: registered new interface driver hub
[    1.696838] usbcore: registered new device driver usb
[    1.697274] pps_core: LinuxPPS API ver. 1 registered
[    1.697373] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.697569] PTP clock support registered
[    1.706297] vgaarb: loaded
[    1.709176] clocksource: Switched to clocksource arch_sys_counter
[    1.738471] NET: Registered PF_INET protocol family
[    1.739609] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.744557] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.745018] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.745428] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    1.745915] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    1.746476] TCP: Hash tables configured (established 8192 bind 8192)
[    1.747294] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.747542] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.748553] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.750707] RPC: Registered named UNIX socket transport module.
[    1.750842] RPC: Registered udp transport module.
[    1.750927] RPC: Registered tcp transport module.
[    1.751009] RPC: Registered tcp-with-tls transport module.
[    1.751100] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.751266] PCI: CLS 0 bytes, default 64
[    1.755053] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.757652] NFS: Registering the id_resolver key type
[    1.758394] Key type id_resolver registered
[    1.758503] Key type id_legacy registered
[    1.761265] Key type cifs.idmap registered
[    1.870283] xor: measuring software checksum speed
[    1.875502]    arm4regs        :  2039 MB/sec
[    1.884316]    8regs           :  1163 MB/sec
[    1.889060]    32regs          :  2254 MB/sec
[    1.894124]    neon            :  2073 MB/sec
[    1.894362] xor: using function: 32regs (2254 MB/sec)
[    1.894618] async_tx: api initialized (async)
[    1.895099] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.895533] io scheduler mq-deadline registered
[    1.895795] io scheduler kyber registered
[    1.897955] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    1.898722] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    1.899750] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    1.900656] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    1.902034] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    1.902558] pci_bus 0000:00: root bus resource [bus 00-0f]
[    1.902858] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    1.903160] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    1.904246] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    1.906482] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    1.906953] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    1.907260] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    1.907594] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.908402] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    1.908727] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    1.909860] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    1.910187] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    1.910502] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.911853] PCI: bus0: Fast back to back transfers disabled
[    1.912983] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    1.913507] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    1.913930] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    1.914337] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    1.914669] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff]
[    1.915000] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    1.915964] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    1.921285] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    1.923096] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    1.996195] printk: console [hvc0] enabled
[    1.996584] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.023113] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.023131] [drm] features: -context_init
[    2.024548] [drm] number of scanouts: 1
[    2.024887] [drm] number of cap sets: 0
[    2.031778] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    2.100739] Console: switching to colour frame buffer device 160x50
[    2.104564] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.130244] brd: module loaded
[    2.130907] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.134149] virtio_blk virtio1: [vda] 4826768 512-byte logical blocks (2.47 GB/2.30 GiB)
[    2.148553] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.149751] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.153499] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.157360] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.157840] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.158588] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.164400] hub 1-0:1.0: USB hub found
[    2.165187] hub 1-0:1.0: 4 ports detected
[    2.167684] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.169645] hub 2-0:1.0: USB hub found
[    2.170112] hub 2-0:1.0: 4 ports detected
[    2.174644] rtc-pl031 9010000.pl031: registered as rtc0
[    2.175562] rtc-pl031 9010000.pl031: setting system clock to 2024-09-25T14:44:15 UTC (1727275455)
[    2.178664] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.181631] usbcore: registered new interface driver usbhid
[    2.182162] usbhid: USB HID core driver
[    2.182806] u32 classifier
[    2.183059]     input device check on
[    2.183394]     Actions configured
[    2.184993] NET: Registered PF_INET6 protocol family
[    2.190290] Segment Routing with IPv6
[    2.190828] In-situ OAM (IOAM) with IPv6
[    2.191730] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.194034] NET: Registered PF_PACKET protocol family
[    2.194891] Bridge firewalling registered
[    2.195790] Key type dns_resolver registered
[    2.196641] NET: Registered PF_VSOCK protocol family
[    2.197692] Registering SWP/SWPB emulation handler
[    2.225193] registered taskstats version 1
[    2.241509] Key type .fscrypt registered
[    2.241961] Key type fscrypt-provisioning registered
[    2.245911] Btrfs loaded, zoned=no, fsverity=no
[    2.247508] Key type encrypted registered
[    2.249074] printk: console [netcon0] enabled
[    2.249532] netconsole: network logging started
[    2.299679] IP-Config: Complete:
[    2.300081]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    2.300902]      host=192.168.7.2, domain=, nis-domain=(none)
[    2.301654]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.301702]      nameserver0=8.8.8.8
[    2.304253] clk: Disabling unused clocks
[    2.309774] md: Waiting for all devices to be available before autodetect
[    2.310362] md: If you don't use raid, use raid=noautodetect
[    2.310919] md: Autodetecting RAID arrays.
[    2.311296] md: autorun ...
[    2.311586] md: ... autorun DONE.
[    2.363269] EXT4-fs (vda): mounted filesystem 8bea22c0-2f28-4f7d-a673-dca50f79e1de r/w with ordered data mode. Quota mode: disabled.
[    2.365080] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.367150] devtmpfs: mounted
[    2.489204] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.496670] Freeing unused kernel image (initmem) memory: 2048K
[    2.539961] Run /sbin/init as init process
INIT: version 3.04 booting
[    2.690566] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    2.693160] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    2.839169] usb 1-2: new high-speed USB device number 3 using xhci_hcd
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    3.053792] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    3.119820] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
Starting udev
[    3.925259] udevd[132]: starting version 3.2.14
[    3.980358] udevd[133]: starting eudev-3.2.14
[   14.570974] EXT4-fs (vda): re-mounted 8bea22c0-2f28-4f7d-a673-dca50f79e1de r/w. Quota mode: disabled.
[   15.190309] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... Error: ipv4: Address already assigned.
Starting system message bus: dbus.
Starting Connection Manager
Starting OpenBSD Secure Shell server: sshd
done.
Starting Xserver
Starting rpcbind daemon...
done.

X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.6.35-yocto-standard #1 SMP PREEMPT Fri Jun 28 17:07:38 UTC 2024 armv7l
Kernel command line: root=/dev/vda rw  mem=768M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 25 14:44:42 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86CameraAccessEnable
> Warning:          Could not resolve keysym XF86CameraAccessDisable
> Warning:          Could not resolve keysym XF86CameraAccessToggle
> Warning:          Could not resolve keysym XF86NextElement
> Warning:          Could not resolve keysym XF86PreviousElement
> Warning:          Could not resolve keysym XF86AutopilotEngageToggle
> Warning:          Could not resolve keysym XF86MarkWaypoint
> Warning:          Could not resolve keysym XF86Sos
> Warning:          Could not resolve keysym XF86NavChart
> Warning:          Could not resolve keysym XF86FishingChart
> Warning:          Could not resolve keysym XF86SingleRangeRadar
> Warning:          Could not resolve keysym XF86DualRangeRadar
> Warning:          Could not resolve keysym XF86RadarOverlay
> Warning:          Could not resolve keysym XF86TraditionalSonar
> Warning:          Could not resolve keysym XF86ClearvuSonar
> Warning:          Could not resolve keysym XF86SidevuSonar
> Warning:          Could not resolve keysym XF86NavInfo
Errors from xkbcomp are not fatal to the X server
[A[74G[ ok ]
Starting Telephony daemon
Starting crond: OK
Starting tcf-agent: OK
D-BUS per-session daemon address is: unix:path=/tmp/dbus-KpbMcPnBCz,guid=8512273e0415c84bdadc22d866f421dc
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
[settings daemon] Forking. run with -n to prevent fork
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop


Poky (Yocto Project Reference Distro) 5.0.4 qemuarm hvc0

qemuarm login: dbus-daemon[612]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=595 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[612]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:630): Gtk-[1;33mWARNING[0m **: [34m14:44:47.817[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:630): [1;33mWARNING[0m **: [34m14:44:47.823[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
[  102.642156] hrtimer: interrupt took 33121904 ns
[  942.294813] hellomod: loading out-of-tree module taints kernel.
[  942.326314] Hello world!
[  947.114445] Cleaning up hellomod.
