[ 0.000000] random: crng init done [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] Memory limited to 1024MB [ 0.000000] efi: UEFI not found. [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] smccc: KVM: hypervisor services detected (0x00000000 0x00000000 0x00000000 0x00000003) [ 0.000000] percpu: Embedded 28 pages/cpu s76456 r8192 d30040 u114688 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1418040 [ 0.000000] CPU features: detected: SSBS not fully self-synchronizing [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=/dev/vda rw mem=1024M ip=192.168.7.16::192.168.7.15:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 262144 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: SWIOTLB bounce buffer size roundup to 1MB [ 0.000000] software IO TLB: mapped [mem 0x000000007e7b7000-0x000000007e8b7000] (1MB) [ 0.000000] Memory: 1000804K/1048576K available (13824K kernel code, 2072K rwdata, 3340K rodata, 1792K init, 699K bss, 47772K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 41991 entries in 165 pages [ 0.000000] ftrace: allocated 165 pages with 4 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000080a0000 [ 0.000000] ITS [mem 0x08080000-0x0809ffff] [ 0.000000] ITS@0x0000000008080000: allocated 8192 Devices @419c0000 (indirect, esz 8, psz 64K, shr 1) [ 0.000000] ITS@0x0000000008080000: allocated 8192 Interrupt Collections @419d0000 (flat, esz 8, psz 64K, shr 1) [ 0.000000] GICv3: using LPI property table @0x00000000419e0000 [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000419f0000 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: Enabling local workaround for ARM erratum 1418040 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000000] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.000183] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.000218] Console: colour dummy device 80x25 [ 0.000224] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.000226] pid_max: default: 32768 minimum: 301 [ 0.000245] LSM: initializing lsm=capability,landlock [ 0.000251] landlock: Up and running. [ 0.000280] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.000283] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002185] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002855] rcu: Hierarchical SRCU implementation. [ 0.002858] rcu: Max phase no-delay instances is 1000. [ 0.002958] Platform MSI: its@8080000 domain created [ 0.002964] PCI/MSI: /intc@8000000/its@8080000 domain created [ 0.002967] EFI services will not be available. [ 0.003003] smp: Bringing up secondary CPUs ... [ 0.005362] Detected PIPT I-cache on CPU1 [ 0.005418] GICv3: CPU1: found redistributor 1 region 0:0x00000000080c0000 [ 0.005478] GICv3: CPU1: using allocated LPI pending table @0x0000000041a00000 [ 0.005505] arch_timer: Enabling local workaround for ARM erratum 1418040 [ 0.005534] CPU1: Booted secondary processor 0x0000000001 [0x413fd0c1] [ 0.007892] Detected PIPT I-cache on CPU2 [ 0.007954] GICv3: CPU2: found redistributor 2 region 0:0x00000000080e0000 [ 0.008013] GICv3: CPU2: using allocated LPI pending table @0x0000000041a10000 [ 0.008041] arch_timer: Enabling local workaround for ARM erratum 1418040 [ 0.008070] CPU2: Booted secondary processor 0x0000000002 [0x413fd0c1] [ 0.010623] Detected PIPT I-cache on CPU3 [ 0.010686] GICv3: CPU3: found redistributor 3 region 0:0x0000000008100000 [ 0.010746] GICv3: CPU3: using allocated LPI pending table @0x0000000041a20000 [ 0.010773] arch_timer: Enabling local workaround for ARM erratum 1418040 [ 0.010802] CPU3: Booted secondary processor 0x0000000003 [0x413fd0c1] [ 0.010930] smp: Brought up 1 node, 4 CPUs [ 0.010935] SMP: Total of 4 processors activated. [ 0.010936] CPU: All CPU(s) started at EL1 [ 0.010938] CPU features: detected: 32-bit EL0 Support [ 0.010940] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.010941] CPU features: detected: Common not Private translations [ 0.010942] CPU features: detected: CRC32 instructions [ 0.010943] CPU features: detected: Enhanced Virtualization Traps [ 0.010945] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.010946] CPU features: detected: LSE atomic instructions [ 0.010947] CPU features: detected: Privileged Access Never [ 0.010948] CPU features: detected: RAS Extension Support [ 0.010951] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.011004] alternatives: applying system-wide alternatives [ 0.012108] CPU features: detected: Hardware dirty bit management on CPU0-3 [ 0.012445] devtmpfs: initialized [ 0.012852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.012857] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.012879] 27280 pages in range for non-PLT usage [ 0.012880] 518800 pages in range for PLT usage [ 0.012928] DMI not present or invalid. [ 0.014175] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.014303] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.014559] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.014566] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.014652] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.014714] ASID allocator initialised with 65536 entries [ 0.014725] Serial: AMBA PL011 UART driver [ 0.021862] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 13, base_baud = 0) is a PL011 rev1 [ 0.021906] printk: legacy console [ttyAMA0] enabled [ 0.150456] raid6: neonx8 gen() 14936 MB/s [ 0.218791] raid6: neonx4 gen() 15967 MB/s [ 0.287200] raid6: neonx2 gen() 13417 MB/s [ 0.355618] raid6: neonx1 gen() 10533 MB/s [ 0.424001] raid6: int64x8 gen() 6964 MB/s [ 0.492381] raid6: int64x4 gen() 7402 MB/s [ 0.560762] raid6: int64x2 gen() 6174 MB/s [ 0.629119] raid6: int64x1 gen() 5093 MB/s [ 0.629894] raid6: using algorithm neonx4 gen() 15967 MB/s [ 0.697462] raid6: .... xor() 12095 MB/s, rmw enabled [ 0.698423] raid6: using neon recovery algorithm [ 0.699253] iommu: Default domain type: Translated [ 0.700066] iommu: DMA domain TLB invalidation policy: strict mode [ 0.701762] SCSI subsystem initialized [ 0.702149] usbcore: registered new interface driver usbfs [ 0.702538] usbcore: registered new interface driver hub [ 0.702902] usbcore: registered new device driver usb [ 0.703252] pps_core: LinuxPPS API ver. 1 registered [ 0.703587] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.704221] PTP clock support registered [ 0.704887] vgaarb: loaded [ 0.705148] clocksource: Switched to clocksource arch_sys_counter [ 0.707505] NET: Registered PF_INET protocol family [ 0.707898] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.708630] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.709255] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.709776] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.710310] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.710857] TCP: Hash tables configured (established 8192 bind 8192) [ 0.711329] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.711798] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.712311] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.712913] RPC: Registered named UNIX socket transport module. [ 0.713368] RPC: Registered udp transport module. [ 0.713702] RPC: Registered tcp transport module. [ 0.714038] RPC: Registered tcp-with-tls transport module. [ 0.714426] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.714883] PCI: CLS 0 bytes, default 64 [ 0.715555] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 0.716164] NFS: Registering the id_resolver key type [ 0.716524] Key type id_resolver registered [ 0.716857] Key type id_legacy registered [ 0.717828] Key type cifs.idmap registered [ 0.728871] xor: measuring software checksum speed [ 0.729692] 8regs : 21026 MB/sec [ 0.730468] 32regs : 20994 MB/sec [ 0.731148] arm64_neon : 27125 MB/sec [ 0.731481] xor: using function: arm64_neon (27125 MB/sec) [ 0.731939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.732447] io scheduler mq-deadline registered [ 0.732762] io scheduler kyber registered [ 0.733239] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: [ 0.733765] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 0.734375] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 0.734977] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 [ 0.735585] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits [ 0.736180] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] [ 0.736840] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 [ 0.737360] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.737744] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.738169] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 0.738639] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] [ 0.739157] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint [ 0.740021] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint [ 0.741351] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] [ 0.742242] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] [ 0.743273] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 0.744396] pci 0000:00:01.0: ROM [mem 0x00000000-0x0003ffff pref] [ 0.745643] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 0.747027] pci 0000:00:02.0: BAR 0 [io 0x0000-0x001f] [ 0.747615] pci 0000:00:02.0: BAR 1 [mem 0x00000000-0x00000fff] [ 0.748070] pci 0000:00:02.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 0.748765] pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint [ 0.749370] pci 0000:00:03.0: BAR 0 [io 0x0000-0x007f] [ 0.749737] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] [ 0.750178] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 0.750841] pci 0000:00:04.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint [ 0.751495] pci 0000:00:04.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.752172] pci 0000:00:05.0: [1af4:1003] type 00 class 0x078000 conventional PCI endpoint [ 0.752805] pci 0000:00:05.0: BAR 0 [io 0x0000-0x003f] [ 0.753178] pci 0000:00:05.0: BAR 1 [mem 0x00000000-0x00000fff] [ 0.753620] pci 0000:00:05.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 0.754297] pci 0000:00:06.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint [ 0.754885] pci 0000:00:06.0: BAR 1 [mem 0x00000000-0x00000fff] [ 0.755322] pci 0000:00:06.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 0.756087] pci 0000:00:01.0: ROM [mem 0x10000000-0x1003ffff pref]: assigned [ 0.756560] pci 0000:00:01.0: BAR 4 [mem 0x8000000000-0x8000003fff 64bit pref]: assigned [ 0.757127] pci 0000:00:02.0: BAR 4 [mem 0x8000004000-0x8000007fff 64bit pref]: assigned [ 0.757740] pci 0000:00:03.0: BAR 4 [mem 0x8000008000-0x800000bfff 64bit pref]: assigned [ 0.758300] pci 0000:00:04.0: BAR 0 [mem 0x800000c000-0x800000ffff 64bit]: assigned [ 0.758828] pci 0000:00:05.0: BAR 4 [mem 0x8000010000-0x8000013fff 64bit pref]: assigned [ 0.759405] pci 0000:00:06.0: BAR 4 [mem 0x8000014000-0x8000017fff 64bit pref]: assigned [ 0.759986] pci 0000:00:01.0: BAR 1 [mem 0x10040000-0x10040fff]: assigned [ 0.760445] pci 0000:00:02.0: BAR 1 [mem 0x10041000-0x10041fff]: assigned [ 0.760904] pci 0000:00:03.0: BAR 1 [mem 0x10042000-0x10042fff]: assigned [ 0.761394] pci 0000:00:05.0: BAR 1 [mem 0x10043000-0x10043fff]: assigned [ 0.761854] pci 0000:00:06.0: BAR 1 [mem 0x10044000-0x10044fff]: assigned [ 0.762312] pci 0000:00:03.0: BAR 0 [io 0x1000-0x107f]: assigned [ 0.762725] pci 0000:00:05.0: BAR 0 [io 0x1080-0x10bf]: assigned [ 0.763137] pci 0000:00:01.0: BAR 0 [io 0x10c0-0x10df]: assigned [ 0.763549] pci 0000:00:02.0: BAR 0 [io 0x10e0-0x10ff]: assigned [ 0.763995] pci 0000:00:04.0: enabling device (0000 -> 0002) [ 0.765349] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) [ 0.767067] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) [ 0.768730] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) [ 0.770442] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) [ 0.772258] virtio-pci 0000:00:06.0: enabling device (0000 -> 0002) [ 0.820001] printk: legacy console [hvc0] enabled [ 0.820233] [drm] pci: virtio-gpu-pci detected at 0000:00:06.0 [ 0.847235] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.847238] [drm] features: -context_init [ 0.849412] [drm] number of scanouts: 1 [ 0.850108] [drm] number of cap sets: 0 [ 0.851009] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:06.0 on minor 0 [ 0.868387] Console: switching to colour frame buffer device 160x50 [ 0.886619] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.891126] brd: module loaded [ 0.891881] virtio_blk virtio2: 4/0/0 default/read/poll queues [ 0.893614] virtio_blk virtio2: [vda] 899216 512-byte logical blocks (460 MB/439 MiB) [ 0.897529] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 0.898569] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 0.900097] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 0.902255] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 0.903342] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 0.904849] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed [ 0.906288] hub 1-0:1.0: USB hub found [ 0.907114] hub 1-0:1.0: 4 ports detected [ 0.908115] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 0.909809] hub 2-0:1.0: USB hub found [ 0.910217] hub 2-0:1.0: 4 ports detected [ 0.910965] rtc-pl031 9010000.pl031: registered as rtc0 [ 0.911503] rtc-pl031 9010000.pl031: setting system clock to 2024-09-27T01:16:13 UTC (1727399773) [ 0.912640] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.913744] usbcore: registered new interface driver usbhid [ 0.914310] usbhid: USB HID core driver [ 0.915164] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.916041] u32 classifier [ 0.916337] input device check on [ 0.916732] Actions configured [ 0.917199] NET: Registered PF_INET6 protocol family [ 0.917949] Segment Routing with IPv6 [ 0.918356] In-situ OAM (IOAM) with IPv6 [ 0.918772] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.919474] NET: Registered PF_PACKET protocol family [ 0.920017] Bridge firewalling registered [ 0.920459] Key type dns_resolver registered [ 0.920964] NET: Registered PF_VSOCK protocol family [ 0.922813] registered taskstats version 1 [ 0.924863] Key type .fscrypt registered [ 0.925321] Key type fscrypt-provisioning registered [ 0.926309] Btrfs loaded, zoned=no, fsverity=no [ 0.927461] Key type encrypted registered [ 0.928293] printk: legacy console [netcon0] enabled [ 0.929378] netconsole: network logging started [ 0.953187] IP-Config: Complete: [ 0.954841] device=eth0, hwaddr=52:54:00:12:34:10, ipaddr=192.168.7.16, mask=255.255.255.0, gw=192.168.7.15 [ 0.959737] host=192.168.7.16, domain=, nis-domain=(none) [ 0.962623] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.962629] nameserver0=8.8.8.8 [ 0.968080] clk: Disabling unused clocks [ 0.969899] PM: genpd: Disabling unused power domains [ 0.971614] md: Waiting for all devices to be available before autodetect [ 0.972958] md: If you don't use raid, use raid=noautodetect [ 0.974179] md: Autodetecting RAID arrays. [ 0.974981] md: autorun ... [ 0.975567] md: ... autorun DONE. [ 0.983737] EXT4-fs (vda): mounted filesystem 6bf8913f-6c6d-4b86-ae52-5466192aaa1a r/w with ordered data mode. Quota mode: disabled. [ 0.986033] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.987315] devtmpfs: mounted [ 0.988394] Freeing unused kernel memory: 1792K [ 0.989430] Run /sbin/init as init process INIT: version 3.04 booting Starting udev [ 1.077090] udevd[128]: starting version 3.2.14 [ 1.084665] udevd[129]: starting eudev-3.2.14 [ 1.161184] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.315318] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 1.321500] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0 [ 1.465181] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 1.627268] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 1.693297] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0 [ 1.837201] EXT4-fs (vda): re-mounted 6bf8913f-6c6d-4b86-ae52-5466192aaa1a r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh ECDSA host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 5.1 qemuarm64 /dev/hvc0 qemuarm64 login: [ 14.408800] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 14.425662] scsi host0: scsi_debug: version 0191 [20210520] [ 14.425662] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 14.432973] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 14.435505] scsi 0:0:0:0: Power-on or device reset occurred [ 14.464326] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 14.479169] sd 0:0:0:0: [sda] Write Protect is off [ 14.488550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 14.514435] sd 0:0:0:0: [sda] permanent stream count = 5 [ 14.531296] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 14.538273] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 14.605811] sd 0:0:0:0: [sda] Attached SCSI disk [ 14.937909] sda: sda1 [ 15.909268] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 16.173114] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 16.175903] scsi host0: scsi_debug: version 0191 [20210520] [ 16.175903] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 16.183509] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 16.185388] scsi 0:0:0:0: Power-on or device reset occurred [ 16.212140] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 16.229846] sd 0:0:0:0: [sda] Write Protect is off [ 16.243375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 16.284915] sd 0:0:0:0: [sda] permanent stream count = 5 [ 16.310153] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 16.312047] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 16.413493] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.711648] sda: [ 17.437700] udevd[2609]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 17.641310] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 17.842400] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 17.844816] scsi host0: scsi_debug: version 0191 [20210520] [ 17.844816] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 17.848823] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 17.850725] scsi 0:0:0:0: Power-on or device reset occurred [ 17.871591] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 17.878354] sd 0:0:0:0: [sda] Write Protect is off [ 17.888353] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 17.915505] sd 0:0:0:0: [sda] permanent stream count = 5 [ 17.931599] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 17.935270] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 18.009681] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.932426] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem [ 18.950468] EXT4-fs (sda): mounted filesystem b66e8d14-0bed-4ff0-844d-159046ea00ea r/w without journal. Quota mode: disabled. [ 19.055719] EXT4-fs (sda): unmounting filesystem b66e8d14-0bed-4ff0-844d-159046ea00ea. [ 19.342755] sda: sda1 [ 20.741225] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 20.900652] loop: module loaded [ 20.902337] loop0: detected capacity change from 0 to 2048000 [ 20.991361] udevd[2870]: inotify_add_watch(6, /dev/loop0p1, 10) failed: No such file or directory [ 24.537760] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 24.540364] scsi host0: scsi_debug: version 0191 [20210520] [ 24.540364] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 24.543392] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 24.545274] scsi 0:0:0:0: Power-on or device reset occurred [ 24.567041] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 24.574306] sd 0:0:0:0: [sda] Write Protect is off [ 24.583897] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 24.611118] sd 0:0:0:0: [sda] permanent stream count = 5 [ 24.625754] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 24.628635] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 24.696071] sd 0:0:0:0: [sda] Attached SCSI disk [ 25.038397] sda: sda1 [ 25.770309] sda: [ 26.625280] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 27.035899] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 27.044944] scsi host0: scsi_debug: version 0191 [20210520] [ 27.044944] dev_size_mb=1, opts=0x0, submit_queues=1, statistics=0 [ 27.049232] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 27.050933] scsi 0:0:0:0: Power-on or device reset occurred [ 27.074825] sd 0:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) [ 27.081537] sd 0:0:0:0: [sda] Write Protect is off [ 27.091276] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 27.121347] sd 0:0:0:0: [sda] permanent stream count = 5 [ 27.135787] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 27.137846] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 27.204193] sd 0:0:0:0: [sda] Attached SCSI disk [ 27.440202] sda: [ 27.575108] sda: sda1 < > [ 27.746126] sda: sda1 < sda5 > [ 27.849221] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 28.016312] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 28.019566] scsi host0: scsi_debug: version 0191 [20210520] [ 28.019566] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 28.024970] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 28.027645] scsi 0:0:0:0: Power-on or device reset occurred [ 28.049965] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 28.057221] sd 0:0:0:0: [sda] Write Protect is off [ 28.066728] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 28.093983] sd 0:0:0:0: [sda] permanent stream count = 5 [ 28.108513] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 28.110468] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 28.173003] sd 0:0:0:0: [sda] Attached SCSI disk [ 28.468012] sda: [ 28.777333] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 29.376172] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 29.377997] scsi host0: scsi_debug: version 0191 [20210520] [ 29.377997] dev_size_mb=267, opts=0x0, submit_queues=1, statistics=0 [ 29.383045] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 29.384869] scsi 0:0:0:0: Power-on or device reset occurred [ 29.406354] sd 0:0:0:0: [sda] 546816 512-byte logical blocks: (280 MB/267 MiB) [ 29.421578] sd 0:0:0:0: [sda] Write Protect is off [ 29.430961] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 29.458414] sd 0:0:0:0: [sda] permanent stream count = 5 [ 29.473527] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 29.475482] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 29.549326] sd 0:0:0:0: [sda] Attached SCSI disk [ 29.902207] sda: [ 60.579609] sda: [ 92.256515] sda: [ 92.573250] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 92.769496] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 92.772145] scsi host0: scsi_debug: version 0191 [20210520] [ 92.772145] dev_size_mb=5, opts=0x0, submit_queues=1, statistics=0 [ 92.775339] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 92.777594] scsi 0:0:0:0: Power-on or device reset occurred [ 92.799399] sd 0:0:0:0: [sda] 10240 512-byte logical blocks: (5.24 MB/5.00 MiB) [ 92.806776] sd 0:0:0:0: [sda] Write Protect is off [ 92.816959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 92.843726] sd 0:0:0:0: [sda] permanent stream count = 5 [ 92.858355] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 92.860586] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 92.931755] sd 0:0:0:0: [sda] Attached SCSI disk [ 93.202872] sda: [ 94.801820] EXT4-fs (sda1): mounted filesystem c1cd8209-f6fa-4f11-8dbc-330c36047a83 r/w without journal. Quota mode: disabled. [ 94.990990] EXT4-fs (sda1): unmounting filesystem c1cd8209-f6fa-4f11-8dbc-330c36047a83. [ 95.149718] udevd[4611]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 95.285249] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 95.481093] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 95.486129] scsi host0: scsi_debug: version 0191 [20210520] [ 95.486129] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 95.490376] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 95.492349] scsi 0:0:0:0: Power-on or device reset occurred [ 95.515870] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 95.521811] sd 0:0:0:0: [sda] Write Protect is off [ 95.531248] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 95.557579] sd 0:0:0:0: [sda] permanent stream count = 5 [ 95.571453] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 95.572842] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 95.640228] sd 0:0:0:0: [sda] Attached SCSI disk [ 97.205592] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 97.387334] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 97.389744] scsi host0: scsi_debug: version 0191 [20210520] [ 97.389744] dev_size_mb=25, opts=0x0, submit_queues=1, statistics=0 [ 97.393293] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 97.395459] scsi 0:0:0:0: Power-on or device reset occurred [ 97.417616] sd 0:0:0:0: [sda] 51200 512-byte logical blocks: (26.2 MB/25.0 MiB) [ 97.425454] sd 0:0:0:0: [sda] Write Protect is off [ 97.435943] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 97.463379] sd 0:0:0:0: [sda] permanent stream count = 5 [ 97.478224] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 97.480239] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 97.543314] sd 0:0:0:0: [sda] Attached SCSI disk [ 98.784282] udevd[4778]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 98.788468] udevd[4778]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 98.792651] udevd[4778]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 98.796108] udevd[4778]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 98.798626] udevd[4778]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 100.129238] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 103.569478] loop0: detected capacity change from 0 to 2048000 [ 103.625346] I/O error, dev loop0, sector 2047872 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 103.631207] udevd[6479]: inotify_add_watch(6, /dev/loop0p1, 10) failed: No such file or directory [ 103.703816] loop0: detected capacity change from 0 to 2048000 [ 103.916662] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 103.918840] scsi host0: scsi_debug: version 0191 [20210520] [ 103.918840] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 103.924896] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 103.927061] scsi 0:0:0:0: Power-on or device reset occurred [ 103.948773] sd 0:0:0:0: [sda] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB) [ 103.956222] sd 0:0:0:0: [sda] Write Protect is off [ 103.966365] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 103.993512] sd 0:0:0:0: [sda] permanent stream count = 5 [ 104.008083] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 104.010165] sd 0:0:0:0: [sda] Optimal transfer size 262144 bytes [ 104.077683] sd 0:0:0:0: [sda] Attached SCSI disk [ 104.365477] sda: [ 104.577245] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 104.727616] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 104.730484] scsi host0: scsi_debug: version 0191 [20210520] [ 104.730484] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 104.734044] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 104.736175] scsi 0:0:0:0: Power-on or device reset occurred [ 104.757992] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 104.760959] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) [ 104.764218] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 104.770495] sd 0:0:0:0: [sda] Write Protect is off [ 104.780526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 104.806864] sd 0:0:0:0: [sda] permanent stream count = 5 [ 104.821627] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 104.824185] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 104.888301] sda: sda1 sda2 sda3 sda4 [ 104.890258] sd 0:0:0:0: [sda] Attached SCSI disk [ 105.209503] sda: sda1 sda2 sda3 sda4 [ 105.393222] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 106.084861] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 106.088843] scsi host0: scsi_debug: version 0191 [20210520] [ 106.088843] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 106.092618] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 106.094936] scsi 0:0:0:0: Power-on or device reset occurred [ 106.122343] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 106.128757] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) [ 106.133102] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 106.138243] sd 0:0:0:0: [sda] Write Protect is off [ 106.152638] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 106.179964] sd 0:0:0:0: [sda] permanent stream count = 5 [ 106.193681] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 106.196335] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 106.260594] sd 0:0:0:0: [sda] Attached SCSI disk [ 106.575245] sda: [ 106.945995] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 106.950908] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 107.142412] sda: sda1 [ 107.483599] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 107.486486] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 107.697801] sda: sda1 [ 108.040103] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 108.044488] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 108.235631] sda: sda1 [ 108.578435] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 108.582305] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 108.789273] sda: sda1 [ 109.130045] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 109.134537] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 109.327890] sda: sda1 [ 109.674637] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 109.679539] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 109.884696] sda: sda1 [ 110.228645] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 110.233519] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 110.674650] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 110.678500] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 110.888708] sda: sda1 [ 111.258015] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 111.262485] udevd[6674]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 111.741218] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 111.891886] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 111.894477] scsi host0: scsi_debug: version 0191 [20210520] [ 111.894477] dev_size_mb=1, opts=0x0, submit_queues=1, statistics=0 [ 111.897704] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 111.900040] scsi 0:0:0:0: Power-on or device reset occurred [ 111.923707] sd 0:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) [ 111.929811] sd 0:0:0:0: [sda] Write Protect is off [ 111.939323] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 111.965926] sd 0:0:0:0: [sda] permanent stream count = 5 [ 111.979760] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 111.981831] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 112.045075] sd 0:0:0:0: [sda] Attached SCSI disk [ 122.457842] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 122.637582] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 122.640624] scsi host0: scsi_debug: version 0191 [20210520] [ 122.640624] dev_size_mb=6, opts=0x0, submit_queues=1, statistics=0 [ 122.644690] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 122.649041] scsi 0:0:0:0: Power-on or device reset occurred [ 122.670514] sd 0:0:0:0: [sda] 12288 512-byte logical blocks: (6.29 MB/6.00 MiB) [ 122.677742] sd 0:0:0:0: [sda] Write Protect is off [ 122.687291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 122.714536] sd 0:0:0:0: [sda] permanent stream count = 5 [ 122.729178] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 122.731919] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 122.795761] sd 0:0:0:0: [sda] Attached SCSI disk [ 123.106794] sda: [ 127.781786] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 [ 128.395813] EXT4-fs (sda14): mounting ext2 file system using the ext4 subsystem [ 128.410885] EXT4-fs (sda14): mounted filesystem 041234c2-5af7-466c-a1d9-c777aed64e48 r/w without journal. Quota mode: disabled. [ 128.865164] EXT4-fs (sda15): mounting ext2 file system using the ext4 subsystem [ 128.879747] EXT4-fs (sda15): mounted filesystem d18cb968-1cb9-4e09-af85-a56c8f1748d0 r/w without journal. Quota mode: disabled. [ 129.336047] EXT4-fs (sda16): mounting ext2 file system using the ext4 subsystem [ 129.350887] EXT4-fs (sda16): mounted filesystem 761e3444-d091-4006-84ff-0b62920ffd7d r/w without journal. Quota mode: disabled. [ 129.790928] EXT4-fs (sda14): unmounting filesystem 041234c2-5af7-466c-a1d9-c777aed64e48. [ 129.848359] EXT4-fs (sda15): unmounting filesystem d18cb968-1cb9-4e09-af85-a56c8f1748d0. [ 129.906778] EXT4-fs (sda16): unmounting filesystem 761e3444-d091-4006-84ff-0b62920ffd7d. [ 130.029244] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 130.238902] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 130.246192] scsi host0: scsi_debug: version 0191 [20210520] [ 130.246192] dev_size_mb=9, opts=0x0, submit_queues=1, statistics=0 [ 130.249009] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 130.250918] scsi 0:0:0:0: Power-on or device reset occurred [ 130.272553] sd 0:0:0:0: [sda] 18432 512-byte logical blocks: (9.44 MB/9.00 MiB) [ 130.280552] sd 0:0:0:0: [sda] Write Protect is off [ 130.291049] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 130.320098] sd 0:0:0:0: [sda] permanent stream count = 5 [ 130.334844] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 130.336487] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 130.399084] sd 0:0:0:0: [sda] Attached SCSI disk [ 130.736173] sda: sda1 < > [ 133.623954] hrtimer: interrupt took 8200 ns [ 163.915635] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 > [ 165.008728] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 > [ 165.610419] sd 0:0:0:0: [sda] Synchronizing SCSI cache