[ 0.000000] CPU: ARMv7 Processor [414fc0f0] revision 0 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: linux,dummy-virt [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000004fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 18 pages/cpu s41812 r8192 d23724 u73728 [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65536 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 237876K/262144K available (10240K kernel code, 1462K rwdata, 2836K rodata, 2048K init, 335K bss, 24268K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 41583 entries in 122 pages [ 0.000000] ftrace: allocated 122 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.001152] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns [ 0.002334] Switching to timer-based delay loop, resolution 16ns [ 0.112000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.180412] Console: colour dummy device 80x30 [ 0.191996] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000) [ 0.193303] CPU: Testing write buffer coherency: ok [ 0.204397] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.205548] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.206210] pid_max: default: 32768 minimum: 301 [ 0.216875] LSM: initializing lsm=capability,landlock [ 0.221566] landlock: Up and running. [ 0.233839] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.234244] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.431578] /cpus/cpu@0 missing clock-frequency property [ 0.451119] /cpus/cpu@1 missing clock-frequency property [ 0.451597] /cpus/cpu@2 missing clock-frequency property [ 0.451944] /cpus/cpu@3 missing clock-frequency property [ 0.452989] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.559707] Setting up static identity map for 0x40200000 - 0x40200060 [ 0.568433] rcu: Hierarchical SRCU implementation. [ 0.568772] rcu: Max phase no-delay instances is 1000. [ 0.621890] smp: Bringing up secondary CPUs ... [ 0.650121] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.650677] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.708062] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.708460] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.726631] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.727083] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.731085] smp: Brought up 1 node, 4 CPUs [ 0.731833] SMP: Total of 4 processors activated (500.00 BogoMIPS). [ 0.732324] CPU: All CPU(s) started in SVC mode. [ 0.863883] devtmpfs: initialized [ 0.944489] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 1.080342] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 1.095637] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.268842] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.304349] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 1.372941] cpuidle: using governor ladder [ 1.387429] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 1.388106] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 1.401155] Serial: AMBA PL011 UART driver [ 1.677317] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 1.689051] printk: legacy console [ttyAMA0] enabled [ 1.978726] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 2.067458] cryptd: max_cpu_qlen set to 1000 [ 2.328904] raid6: neonx8 gen() 69 MB/s [ 2.512350] raid6: neonx4 gen() 167 MB/s [ 2.718310] raid6: neonx2 gen() 243 MB/s [ 2.909121] raid6: neonx1 gen() 128 MB/s [ 3.091872] raid6: int32x8 gen() 18 MB/s [ 3.282296] raid6: int32x4 gen() 27 MB/s [ 3.472114] raid6: int32x2 gen() 85 MB/s [ 3.663747] raid6: int32x1 gen() 86 MB/s [ 3.667643] raid6: using algorithm neonx2 gen() 243 MB/s [ 3.849065] raid6: .... xor() 114 MB/s, rmw enabled [ 3.853355] raid6: using neon recovery algorithm [ 3.888377] SCSI subsystem initialized [ 3.898729] usbcore: registered new interface driver usbfs [ 3.919403] usbcore: registered new interface driver hub [ 3.926394] usbcore: registered new device driver usb [ 3.935002] pps_core: LinuxPPS API ver. 1 registered [ 3.938414] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.946849] PTP clock support registered [ 4.067467] vgaarb: loaded [ 4.121095] clocksource: Switched to clocksource arch_sys_counter [ 7.171362] NET: Registered PF_INET protocol family [ 7.183436] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 7.247434] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 7.251093] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 7.253325] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 7.258726] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 7.261517] TCP: Hash tables configured (established 2048 bind 2048) [ 7.273129] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 7.280351] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 7.297046] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 7.329960] RPC: Registered named UNIX socket transport module. [ 7.333956] RPC: Registered udp transport module. [ 7.338131] RPC: Registered tcp transport module. [ 7.339427] RPC: Registered tcp-with-tls transport module. [ 7.340703] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.343041] PCI: CLS 0 bytes, default 64 [ 7.413242] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 7.452441] NFS: Registering the id_resolver key type [ 7.467068] Key type id_resolver registered [ 7.470048] Key type id_legacy registered [ 7.508649] Key type cifs.idmap registered [ 9.047692] xor: measuring software checksum speed [ 9.118427] arm4regs : 150 MB/sec [ 9.176416] 8regs : 179 MB/sec [ 9.253773] 32regs : 165 MB/sec [ 9.361157] neon : 106 MB/sec [ 9.366175] xor: using function: 8regs (179 MB/sec) [ 9.369639] async_tx: api initialized (async) [ 9.376444] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 9.379239] io scheduler mq-deadline registered [ 9.380922] io scheduler kyber registered [ 9.409018] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 9.420355] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 9.431687] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 9.447601] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 9.467093] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 9.472828] pci_bus 0000:00: root bus resource [bus 00-0f] [ 9.478208] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 9.482192] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 9.512534] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint [ 9.549624] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint [ 9.559277] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f] [ 9.563198] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff] [ 9.569377] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 9.580660] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint [ 9.588355] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 9.600360] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint [ 9.607558] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff] [ 9.611409] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref] [ 9.630234] PCI: bus0: Fast back to back transfers disabled [ 9.647653] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned [ 9.655466] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned [ 9.661487] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned [ 9.668880] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned [ 9.673050] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned [ 9.679192] pci 0000:00:01.0: BAR 0 [io 0x1000-0x101f]: assigned [ 9.693546] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 9.705904] pci 0000:00:02.0: quirk_usb_early_handoff+0x0/0x778 took 15225 usecs [ 9.802440] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 9.832221] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 10.084015] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 10.093396] printk: legacy console [hvc0] enabled [ 10.094017] [drm] features: -virgl +edid -resource_blob -host_visible [ 10.332082] [drm] features: -context_init [ 10.353137] [drm] number of scanouts: 1 [ 10.359239] [drm] number of cap sets: 0 [ 10.458853] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 11.058826] Console: switching to colour frame buffer device 160x50 [ 11.241929] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 11.578723] brd: module loaded [ 11.587222] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 11.638145] virtio_blk virtio1: [vda] 837932 512-byte logical blocks (429 MB/409 MiB) [ 11.819334] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 11.828838] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 11.870334] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 11.925923] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 11.931739] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 11.952846] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 12.029413] hub 1-0:1.0: USB hub found [ 12.041078] hub 1-0:1.0: 4 ports detected [ 12.084058] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 12.113317] hub 2-0:1.0: USB hub found [ 12.121717] hub 2-0:1.0: 4 ports detected [ 12.220618] rtc-pl031 9010000.pl031: registered as rtc0 [ 12.236871] rtc-pl031 9010000.pl031: setting system clock to 2024-10-01T10:50:06 UTC (1727779806) [ 12.270038] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 12.308548] usbcore: registered new interface driver usbhid [ 12.320011] usbhid: USB HID core driver [ 12.330941] u32 classifier [ 12.335783] input device check on [ 12.339552] Actions configured [ 12.367656] NET: Registered PF_INET6 protocol family [ 12.397991] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 12.470548] Segment Routing with IPv6 [ 12.477947] In-situ OAM (IOAM) with IPv6 [ 12.488716] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 12.521860] NET: Registered PF_PACKET protocol family [ 12.533764] Bridge firewalling registered [ 12.549203] Key type dns_resolver registered [ 12.577003] NET: Registered PF_VSOCK protocol family [ 12.592935] Registering SWP/SWPB emulation handler [ 12.786403] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 12.816706] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 12.996290] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 13.010952] registered taskstats version 1 [ 13.236207] Key type .fscrypt registered [ 13.241110] Key type fscrypt-provisioning registered [ 13.301951] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 13.306888] Btrfs loaded, zoned=no, fsverity=no [ 13.323720] Key type encrypted registered [ 13.346007] printk: legacy console [netcon0] enabled [ 13.351544] netconsole: network logging started [ 13.402747] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 [ 13.628443] IP-Config: Complete: [ 13.633091] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 13.647369] host=192.168.7.2, domain=, nis-domain=(none) [ 13.653305] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 13.653738] nameserver0=8.8.8.8 [ 13.691300] clk: Disabling unused clocks [ 13.731441] md: Waiting for all devices to be available before autodetect [ 13.739487] md: If you don't use raid, use raid=noautodetect [ 13.746257] md: Autodetecting RAID arrays. [ 13.766382] md: autorun ... [ 13.771406] md: ... autorun DONE. [ 14.381502] EXT4-fs (vda): mounted filesystem 0e7ae46d-f270-48ae-a8f7-87b3003ce096 r/w with ordered data mode. Quota mode: disabled. [ 14.409745] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 14.439154] devtmpfs: mounted [ 15.843439] Freeing unused kernel image (initmem) memory: 2048K [ 16.444442] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 67.247356] udevd[138]: starting version 3.2.14 [ 68.552245] udevd[139]: starting eudev-3.2.14 [ 75.008482] hrtimer: interrupt took 30035904 ns [ 262.641626] udevd[151]: timeout '/etc/udev/scripts/mount.sh' [ 263.207782] udevd[151]: slow: '/etc/udev/scripts/mount.sh' [202] [ 264.390147] udevd[151]: timeout: killing '/etc/udev/scripts/mount.sh' [202] [ 265.201889] udevd[151]: slow: '/etc/udev/scripts/mount.sh' [202] [ 266.099674] udevd[151]: '/etc/udev/scripts/mount.sh' [202] terminated by signal 9 (Killed) [ 274.100777] udevd[145]: timeout '/etc/udev/scripts/mount.sh' [ 274.315579] udevd[149]: timeout '/etc/udev/scripts/mount.sh' [ 274.429546] udevd[145]: slow: '/etc/udev/scripts/mount.sh' [159] [ 274.483851] udevd[149]: slow: '/etc/udev/scripts/mount.sh' [163] [ 275.114336] udevd[147]: timeout '/etc/udev/scripts/mount.sh' [ 275.445368] udevd[143]: timeout '/etc/udev/scripts/mount.sh' [ 275.449105] udevd[154]: timeout '/etc/udev/scripts/mount.sh' [ 275.547861] udevd[145]: timeout: killing '/etc/udev/scripts/mount.sh' [159] [ 275.587528] udevd[152]: timeout '/etc/udev/scripts/mount.sh' [ 275.670147] udevd[142]: timeout '/etc/udev/scripts/mount.sh' [ 282.572458] EXT4-fs (vda): re-mounted 0e7ae46d-f270-48ae-a8f7-87b3003ce096 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.10.11-yocto-standard #1 SMP PREEMPT Fri Sep 20 22:32:33 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 1 10:55:40 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" D-BUS per-session daemon address is: unix:path=/tmp/dbus-8nSyY9uucQ,guid=1c983b80ff61eb8ec00c2d2666fbd538 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCLc1MuD0o0H7ifGLo+830Cw4uWsYEJJjV9DAJiaG3mLlHbJA1VoeLaKTQfWcESPS0fbyyxTwMzsOFZS4mYy7gJt2MBITKQfQ6kGMxgtCjnum7QPidII8v6oRD0BjG9/Ob7z4Iw9HYV16grMjY4VhNajI6OxBkCgBr5DjcpB6TgS3/V4bZyAqf5Ou12BCRehcFWfZ9xg0VoawY3W7YoOPJYxKWksTQ50drhxkAuaG2q8CVcB/NaBNZNJj0aPgdb4J/gz7EYvss1Xgv1AV63oeSaEDSbAP8/EOYomPsp2zJrWs3xaU4xT6/0wc4pIJPyB0PHY+LngHYsKtlwLT+gzsQH root@qemuarm Fingerprint: SHA256:0OwxpoAifMLePWFrdkjuCpxDI9isblJefranFZXkXMA dropbear. Starting rpcbind daemon...matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: [settings daemon] Forking. run with -n to prevent fork done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon OpenEmbedded nodistro.0 qemuarm /dev/hvc0 qemuarm login: dbus-daemon[512]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=490 comm="connman-applet") dbus-daemon[512]: Successfully activated service 'org.a11y.atspi.Registry' ** (connman-applet:490): WARNING **: 10:57:53.112: AT-SPI: Could not obtain desktop path or name SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry ** (matchbox-desktop:525): WARNING **: 10:58:10.353: AT-SPI: Could not obtain desktop path or name (matchbox-desktop:525): Gtk-WARNING **: 11:00:49.107: Could not load a pixbuf from icon theme. This may indicate that pixbuf loaders or the mime database could not be found. ** (matchbox-desktop:525): WARNING **: 11:00:49.116: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format