[    0.000000] Linux version 6.10.11-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Fri Sep 20 22:32:40 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14912K kernel code, 1525K rwdata, 2896K rodata, 432K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945292009 ns
[    0.000140] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421676540ns
[    0.006741] Console: colour dummy device 80x25
[    0.007458] printk: legacy console [tty0] enabled
[    0.008146] printk: legacy bootconsole [uart8250] disabled
[    0.000000] Linux version 6.10.11-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Fri Sep 20 22:32:40 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14912K kernel code, 1525K rwdata, 2896K rodata, 432K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945292009 ns
[    0.000140] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421676540ns
[    0.006741] Console: colour dummy device 80x25
[    0.007458] printk: legacy console [tty0] enabled
[    0.008146] printk: legacy bootconsole [uart8250] disabled
[    0.012141] Calibrating delay loop... 1889.07 BogoMIPS (lpj=9445376)
[    0.071198] pid_max: default: 32768 minimum: 301
[    0.072173] LSM: initializing lsm=capability,landlock
[    0.072586] landlock: Up and running.
[    0.074670] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.074767] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.100952] Performance counters: No available PMU.
[    0.101997] rcu: Hierarchical SRCU implementation.
[    0.102044] rcu: 	Max phase no-delay instances is 1000.
[    0.106688] smp: Bringing up secondary CPUs ...
[    0.106844] smp: Brought up 1 node, 1 CPU
[    0.116270] devtmpfs: initialized
[    0.120992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.121156] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.127718] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.141624] LOGIC PIO: addr 0x00000070 not registered in io_range_list
[    0.495110] raid6: int32x8  gen()   449 MB/s
[    0.775446] raid6: int32x4  gen()   976 MB/s
[    0.938749] raid6: int32x2  gen()  1194 MB/s
[    1.110483] raid6: int32x1  gen()   808 MB/s
[    1.110701] raid6: using algorithm int32x2 gen() 1194 MB/s
[    1.282177] raid6: .... xor() 640 MB/s, rmw enabled
[    1.282297] raid6: using intx1 recovery algorithm
[    1.284426] SCSI subsystem initialized
[    1.284788] usbcore: registered new interface driver usbfs
[    1.284991] usbcore: registered new interface driver hub
[    1.285117] usbcore: registered new device driver usb
[    1.285333] pps_core: LinuxPPS API ver. 1 registered
[    1.285364] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.285450] PTP clock support registered
[    1.297680] PCI host bridge to bus 0000:00
[    1.297943] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.298285] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.298392] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.302007] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 conventional PCI endpoint
[    1.302567] pci 0000:00:00.0: [Firmware Bug]: BAR 0: invalid; can't size
[    1.302654] pci 0000:00:00.0: [Firmware Bug]: BAR 1: invalid; can't size
[    1.302733] pci 0000:00:00.0: [Firmware Bug]: BAR 2: invalid; can't size
[    1.302776] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
[    1.302819] pci 0000:00:00.0: [Firmware Bug]: BAR 4: invalid; can't size
[    1.302865] pci 0000:00:00.0: [Firmware Bug]: BAR 5: invalid; can't size
[    1.304715] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 conventional PCI endpoint
[    1.305206] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 conventional PCI endpoint
[    1.305424] pci 0000:00:0a.1: BAR 4 [io  0x0000-0x000f]
[    1.305507] pci 0000:00:0a.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    1.305546] pci 0000:00:0a.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    1.305596] pci 0000:00:0a.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    1.305633] pci 0000:00:0a.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    1.305878] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 conventional PCI endpoint
[    1.305983] pci 0000:00:0a.2: BAR 4 [io  0x0000-0x001f]
[    1.306355] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    1.306736] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.306829] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.307167] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    1.307236] pci 0000:00:12.0: BAR 0 [mem 0x00000000-0x00ffffff pref]
[    1.307315] pci 0000:00:12.0: BAR 2 [mem 0x00000000-0x00000fff]
[    1.307370] pci 0000:00:12.0: ROM [mem 0x00000000-0x0000ffff pref]
[    1.307662] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    1.307732] pci 0000:00:13.0: BAR 0 [io  0x0000-0x001f]
[    1.307815] pci 0000:00:13.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.307884] pci 0000:00:13.0: ROM [mem 0x00000000-0x0003ffff pref]
[    1.308119] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.308182] pci 0000:00:14.0: BAR 0 [io  0x0000-0x001f]
[    1.308244] pci 0000:00:14.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.308473] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    1.308534] pci 0000:00:15.0: BAR 0 [io  0x0000-0x007f]
[    1.308595] pci 0000:00:15.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.309059] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.310067] pci 0000:00:12.0: BAR 0 [mem 0x10000000-0x10ffffff pref]: assigned
[    1.310278] pci 0000:00:13.0: ROM [mem 0x11000000-0x1103ffff pref]: assigned
[    1.310344] pci 0000:00:12.0: ROM [mem 0x11040000-0x1104ffff pref]: assigned
[    1.310389] pci 0000:00:13.0: BAR 4 [mem 0x11050000-0x11053fff 64bit pref]: assigned
[    1.310476] pci 0000:00:14.0: BAR 4 [mem 0x11054000-0x11057fff 64bit pref]: assigned
[    1.310528] pci 0000:00:15.0: BAR 4 [mem 0x11058000-0x1105bfff 64bit pref]: assigned
[    1.310592] pci 0000:00:12.0: BAR 2 [mem 0x1105c000-0x1105cfff]: assigned
[    1.310649] pci 0000:00:15.0: BAR 0 [io  0x1080-0x10ff]: assigned
[    1.310688] pci 0000:00:0a.2: BAR 4 [io  0x1040-0x105f]: assigned
[    1.310719] pci 0000:00:13.0: BAR 0 [io  0x1060-0x107f]: assigned
[    1.310753] pci 0000:00:14.0: BAR 0 [io  0x1400-0x141f]: assigned
[    1.310793] pci 0000:00:0a.1: BAR 4 [io  0x1420-0x142f]: assigned
[    1.312395] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.312476] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.312537] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.312621] vgaarb: loaded
[    1.314053] clocksource: Switched to clocksource MIPS
[    1.332400] NET: Registered PF_INET protocol family
[    1.333252] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.338274] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.338386] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.338467] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.338611] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.338727] TCP: Hash tables configured (established 2048 bind 2048)
[    1.339652] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.339841] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.340955] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.342760] RPC: Registered named UNIX socket transport module.
[    1.342832] RPC: Registered udp transport module.
[    1.342859] RPC: Registered tcp transport module.
[    1.342883] RPC: Registered tcp-with-tls transport module.
[    1.342909] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.343419] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.344159] PCI: CLS 0 bytes, default 16
[    1.350126] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.352321] NFS: Registering the id_resolver key type
[    1.353262] Key type id_resolver registered
[    1.353316] Key type id_legacy registered
[    1.354647] Key type cifs.idmap registered
[    1.582972] xor: measuring software checksum speed
[    1.591435]    8regs           :  1211 MB/sec
[    1.597578]    8regs_prefetch  :  1673 MB/sec
[    1.603097]    32regs          :  1819 MB/sec
[    1.609225]    32regs_prefetch :  1651 MB/sec
[    1.609281] xor: using function: 32regs (1819 MB/sec)
[    1.609597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.609731] io scheduler mq-deadline registered
[    1.609805] io scheduler kyber registered
[    1.613390] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.615722] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.616503] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.618072] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.623557] printk: legacy console [ttyS0] disabled
[    1.644888] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.644976] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.646204] printk: legacy console [ttyS0] enabled
[    1.736404] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.737055] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    1.737373] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    1.743474] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    1.745278] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    1.746277] [drm] Found bochs VGA, ID 0xb0c5.
[    1.746635] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    1.749867] [drm] Found EDID data blob.
[    1.754895] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    1.815602] Console: switching to colour frame buffer device 160x50
[    1.826222] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.847628] brd: module loaded
[    1.848411] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    1.852727] virtio_blk virtio2: [vda] 1162588 512-byte logical blocks (595 MB/568 MiB)
[    1.869063] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    1.870234] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    1.873995] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    1.880183] hub 1-0:1.0: USB hub found
[    1.881018] hub 1-0:1.0: 2 ports detected
[    1.886008] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.886611] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.889595] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.891708] usbcore: registered new interface driver usbhid
[    1.892187] usbhid: USB HID core driver
[    1.892868] u32 classifier
[    1.893124]     input device check on
[    1.893421]     Actions configured
[    1.896593] NET: Registered PF_INET6 protocol family
[    1.902121] Segment Routing with IPv6
[    1.902663] In-situ OAM (IOAM) with IPv6
[    1.906518] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.909079] NET: Registered PF_PACKET protocol family
[    1.910001] Bridge firewalling registered
[    1.911132] l2tp_core: L2TP core driver, V2.0
[    1.911651] Key type dns_resolver registered
[    1.920450] NET: Registered PF_VSOCK protocol family
[    1.933057] failed when register_sysctl_sz sched_core_sysctls to kernel
[    1.949997] failed when register_sysctl_sz sched_fair_sysctls to kernel
[    1.953173] registered taskstats version 1
[    1.966457] Key type .fscrypt registered
[    1.983141] Key type fscrypt-provisioning registered
[    1.991635] Btrfs loaded, zoned=no, fsverity=no
[    1.997915] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.018923] Key type encrypted registered
[    2.031200] printk: legacy console [netcon0] enabled
[    2.034486] netconsole: network logging started
[    2.184226] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.453719] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    2.457567] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    2.646217] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.724059] IP-Config: Complete:
[    2.731307]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    2.736593]      host=192.168.7.4, domain=, nis-domain=(none)
[    2.741437]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.741498]      nameserver0=8.8.8.8
[    2.751783] clk: Disabling unused clocks
[    2.770021] md: Waiting for all devices to be available before autodetect
[    2.772757] md: If you don't use raid, use raid=noautodetect
[    2.777674] md: Autodetecting RAID arrays.
[    2.782315] md: autorun ...
[    2.784827] md: ... autorun DONE.
[    2.832105] EXT4-fs (vda): mounted filesystem 74ee8614-8aec-4614-a269-deb94e9e99dd r/w with ordered data mode. Quota mode: disabled.
[    2.840856] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.847216] devtmpfs: mounted
[    2.904369] Freeing unused kernel image (initmem) memory: 432K
[    2.911059] This architecture does not have kernel memory protection.
[    2.916086] Run /sbin/init as init process
[    2.946239] process '/sbin/init.sysvinit' started with executable stack
[    4.404176] udevd[102]: starting version 3.2.14
[    4.467389] udevd[103]: starting eudev-3.2.14
[    8.834467] EXT4-fs (vda): re-mounted 74ee8614-8aec-4614-a269-deb94e9e99dd r/w. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: 
X.Org X Server 1.21.1.13dropbear.

X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.10.11-yocto-standard #1 SMP PREEMPT Fri Sep 20 22:32:40 UTC 2024 mips
Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct  9 18:11:06 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
pci id for fd 10: 1234:1111, driver (null)
MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemumips /dev/ttyS0

qemumips login: 