[    0.023915] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.024068] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.024137] pid_max: default: 32768 minimum: 301
[    0.025126] LSM: initializing lsm=capability,landlock
[    0.025522] landlock: Up and running.
[    0.027434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.027471] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.046657] /cpus/cpu@0 missing clock-frequency property
[    0.046910] /cpus/cpu@1 missing clock-frequency property
[    0.046943] /cpus/cpu@2 missing clock-frequency property
[    0.046974] /cpus/cpu@3 missing clock-frequency property
[    0.047087] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.057719] Setting up static identity map for 0x40200000 - 0x40200060
[    0.058405] rcu: Hierarchical SRCU implementation.
[    0.058437] rcu: 	Max phase no-delay instances is 1000.
[    0.063089] smp: Bringing up secondary CPUs ...
[    0.065841] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.065932] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.070090] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.070166] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.073058] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.073132] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.073774] smp: Brought up 1 node, 4 CPUs
[    0.073854] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.073907] CPU: All CPU(s) started in SVC mode.
[    0.086939] devtmpfs: initialized
[    0.095451] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.109666] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.111356] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.133962] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.137662] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.142847] cpuidle: using governor ladder
[    0.144363] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.144440] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.145740] Serial: AMBA PL011 UART driver
[    0.174249] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.175390] printk: legacy console [ttyAMA0] enabled
[    0.197473] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.203173] cryptd: max_cpu_qlen set to 1000
[    0.378488] raid6: neonx8   gen()   633 MB/s
[    0.549597] raid6: neonx4   gen()  1562 MB/s
[    0.720921] raid6: neonx2   gen()  2103 MB/s
[    0.892209] raid6: neonx1   gen()  1179 MB/s
[    1.064255] raid6: int32x8  gen()   155 MB/s
[    1.235714] raid6: int32x4  gen()   250 MB/s
[    1.407361] raid6: int32x2  gen()   783 MB/s
[    1.578339] raid6: int32x1  gen()   775 MB/s
[    1.578789] raid6: using algorithm neonx2 gen() 2103 MB/s
[    1.749543] raid6: .... xor() 1118 MB/s, rmw enabled
[    1.750054] raid6: using neon recovery algorithm
[    1.754301] SCSI subsystem initialized
[    1.755094] usbcore: registered new interface driver usbfs
[    1.755578] usbcore: registered new interface driver hub
[    1.756047] usbcore: registered new device driver usb
[    1.756726] pps_core: LinuxPPS API ver. 1 registered
[    1.757023] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.757292] PTP clock support registered
[    1.769369] vgaarb: loaded
[    1.773216] clocksource: Switched to clocksource arch_sys_counter
[    1.812113] NET: Registered PF_INET protocol family
[    1.813656] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.820137] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.820714] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.821194] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    1.821759] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    1.822284] TCP: Hash tables configured (established 4096 bind 4096)
[    1.823684] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.824034] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.825383] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.828310] RPC: Registered named UNIX socket transport module.
[    1.828501] RPC: Registered udp transport module.
[    1.828614] RPC: Registered tcp transport module.
[    1.828728] RPC: Registered tcp-with-tls transport module.
[    1.828852] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.829084] PCI: CLS 0 bytes, default 64
[    1.834030] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    1.837198] NFS: Registering the id_resolver key type
[    1.838403] Key type id_resolver registered
[    1.838680] Key type id_legacy registered
[    1.842109] Key type cifs.idmap registered
[    1.979940] xor: measuring software checksum speed
[    1.986688]    arm4regs        :  1661 MB/sec
[    1.992163]    8regs           :  1935 MB/sec
[    1.998318]    32regs          :  1716 MB/sec
[    2.008450]    neon            :  1096 MB/sec
[    2.008804] xor: using function: 8regs (1935 MB/sec)
[    2.009124] async_tx: api initialized (async)
[    2.009790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.010305] io scheduler mq-deadline registered
[    2.010619] io scheduler kyber registered
[    2.013780] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.014775] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.015699] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.016838] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.018499] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.019074] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.019438] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.019814] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.021245] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint
[    2.024558] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.025300] pci 0000:00:01.0: BAR 0 [io  0x0000-0x001f]
[    2.025664] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.025883] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.026530] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint
[    2.026770] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.027498] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.027716] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.027871] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.029181] PCI: bus0: Fast back to back transfers disabled
[    2.030452] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned
[    2.030848] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned
[    2.031078] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned
[    2.031274] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned
[    2.031429] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned
[    2.031587] pci 0000:00:01.0: BAR 0 [io  0x1000-0x101f]: assigned
[    2.032598] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.039478] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.041655] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.085292] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.086218] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.086252] [drm] features: -context_init
[    2.087133] printk: legacy console [hvc0] enabled
[    2.088083] [drm] number of scanouts: 1
[    2.103704] [drm] number of cap sets: 0
[    2.114394] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    2.168181] Console: switching to colour frame buffer device 160x50
[    2.192962] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.218189] brd: module loaded
[    2.219012] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    2.223406] virtio_blk virtio1: [vda] 897244 512-byte logical blocks (459 MB/438 MiB)
[    2.239008] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.239928] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    2.243978] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    2.247207] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    2.247770] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.248560] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    2.255509] hub 1-0:1.0: USB hub found
[    2.256520] hub 1-0:1.0: 4 ports detected
[    2.259988] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.261989] hub 2-0:1.0: USB hub found
[    2.262569] hub 2-0:1.0: 4 ports detected
[    2.268327] rtc-pl031 9010000.pl031: registered as rtc0
[    2.269683] rtc-pl031 9010000.pl031: setting system clock to 2024-10-11T01:14:12 UTC (1728609252)
[    2.273159] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    2.276447] usbcore: registered new interface driver usbhid
[    2.277032] usbhid: USB HID core driver
[    2.277837] u32 classifier
[    2.278126]     input device check on
[    2.278492]     Actions configured
[    2.280582] NET: Registered PF_INET6 protocol family
[    2.287903] Segment Routing with IPv6
[    2.288495] In-situ OAM (IOAM) with IPv6
[    2.289487] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.292358] NET: Registered PF_PACKET protocol family
[    2.294700] Bridge firewalling registered
[    2.295930] l2tp_core: L2TP core driver, V2.0
[    2.296496] Key type dns_resolver registered
[    2.297400] NET: Registered PF_VSOCK protocol family
[    2.298738] Registering SWP/SWPB emulation handler
[    2.327923] registered taskstats version 1
[    2.345779] Key type .fscrypt registered
[    2.346238] Key type fscrypt-provisioning registered
[    2.351549] Btrfs loaded, zoned=no, fsverity=no
[    2.355422] Key type encrypted registered
[    2.357554] printk: legacy console [netcon0] enabled
[    2.358028] netconsole: network logging started
[    2.413267] IP-Config: Complete:
[    2.413789]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    2.414922]      host=192.168.7.8, domain=, nis-domain=(none)
[    2.415478]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.415515]      nameserver0=8.8.8.8
[    2.418522] clk: Disabling unused clocks
[    2.422135] md: Waiting for all devices to be available before autodetect
[    2.424330] md: If you don't use raid, use raid=noautodetect
[    2.426105] md: Autodetecting RAID arrays.
[    2.426567] md: autorun ...
[    2.426865] md: ... autorun DONE.
[    2.480095] EXT4-fs (vda): mounted filesystem f883c5a6-e88a-4ac0-af6b-0caf7bb4cfb1 r/w with ordered data mode. Quota mode: disabled.
[    2.482877] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.485775] devtmpfs: mounted
[    2.603231] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    2.638118] Freeing unused kernel image (initmem) memory: 2048K
[    2.732248] Run /sbin/init as init process
[    2.835386] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    2.837963] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
INIT: version 3.04 booting
[    2.992959] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    3.179345] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    3.254975] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
Starting udev
[    3.870268] udevd[134]: starting version 3.2.14
[    3.962278] udevd[135]: starting eudev-3.2.14
[    5.484241] EXT4-fs (vda): re-mounted f883c5a6-e88a-4ac0-af6b-0caf7bb4cfb1 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.10.11-yocto-standard #1 SMP PREEMPT Fri Sep 20 22:32:33 UTC 2024 armv7l
Starting rpcbind daemon...Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 11 01:14:17 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemuarm /dev/hvc0

qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-md8ebMu0wu,guid=af95c4996c321abd9be59eb467087bee
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[570]: Activating service name='org.a11y.atspi.Registry' requested by ':1.2' (uid=0 pid=583 comm="matchbox-panel --start-applets showdesktop,windows")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[570]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:582): Gtk-[1;33mWARNING[0m **: [34m01:14:25.483[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:582): [1;33mWARNING[0m **: [34m01:14:25.486[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
