[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.50-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 PREEMPT Tue Sep 10 20:01:48 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241020K/262144K available (10844K kernel code, 1430K rwdata, 2872K rodata, 460K init, 339K bss, 21124K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 43015 entries in 127 pages [ 0.000000] ftrace: allocated 127 pages with 7 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.001211] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.004172] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.032428] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.082156] Console: colour dummy device 80x30 [ 0.094343] Calibrating delay loop... 185.75 BogoMIPS (lpj=928768) [ 0.164622] CPU: Testing write buffer coherency: ok [ 0.174457] pid_max: default: 32768 minimum: 301 [ 0.182806] LSM: initializing lsm=capability,landlock,integrity [ 0.187310] landlock: Up and running. [ 0.206170] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.206689] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.496155] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.500579] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.506343] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.512772] Setting up static identity map for 0x8400 - 0x8458 [ 0.521369] rcu: Hierarchical SRCU implementation. [ 0.521723] rcu: Max phase no-delay instances is 1000. [ 0.621152] devtmpfs: initialized [ 0.718151] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.728225] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.729179] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.792972] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.823178] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.933120] platform bridge: Fixed dependency cycle(s) with /vga [ 0.940664] platform vga: Fixed dependency cycle(s) with /bridge [ 1.050007] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 1.052270] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 1.054894] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 1.091074] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 1.092694] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 1.135372] Serial: AMBA PL011 UART driver [ 1.193470] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 1.202579] printk: console [ttyAMA0] enabled [ 1.587837] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 1.611311] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 1.630494] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 1.649703] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 1.691547] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 2.174099] raid6: int32x8 gen() 13 MB/s [ 2.513922] raid6: int32x4 gen() 11 MB/s [ 2.853707] raid6: int32x2 gen() 71 MB/s [ 3.193667] raid6: int32x1 gen() 83 MB/s [ 3.197510] raid6: using algorithm int32x1 gen() 83 MB/s [ 3.534237] raid6: .... xor() 40 MB/s, rmw enabled [ 3.539105] raid6: using intx1 recovery algorithm [ 3.603909] SCSI subsystem initialized [ 3.626224] usbcore: registered new interface driver usbfs [ 3.631765] usbcore: registered new interface driver hub [ 3.645669] usbcore: registered new device driver usb [ 3.719815] pps_core: LinuxPPS API ver. 1 registered [ 3.734451] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 3.742238] PTP clock support registered [ 3.780598] Advanced Linux Sound Architecture Driver Initialized. [ 3.980191] vgaarb: loaded [ 4.034295] clocksource: Switched to clocksource arm,sp804 [ 7.510447] NET: Registered PF_INET protocol family [ 7.525703] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 7.585526] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 7.591756] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 7.599386] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 7.606194] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 7.611729] TCP: Hash tables configured (established 2048 bind 2048) [ 7.626755] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 7.632462] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 7.650371] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 7.680163] RPC: Registered named UNIX socket transport module. [ 7.686956] RPC: Registered udp transport module. [ 7.690198] RPC: Registered tcp transport module. [ 7.694328] RPC: Registered tcp-with-tls transport module. [ 7.697899] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 7.702586] PCI: CLS 0 bytes, default 32 [ 7.736958] NetWinder Floating Point Emulator V0.97 (double precision) [ 7.798360] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 7.832430] NFS: Registering the id_resolver key type [ 7.847527] Key type id_resolver registered [ 7.850619] Key type id_legacy registered [ 7.884382] Key type cifs.idmap registered [ 9.518355] xor: measuring software checksum speed [ 9.587322] arm4regs : 160 MB/sec [ 9.644070] 8regs : 196 MB/sec [ 9.701268] 32regs : 193 MB/sec [ 9.705660] xor: using function: 8regs (196 MB/sec) [ 9.713783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 9.719712] io scheduler mq-deadline registered [ 9.723955] io scheduler kyber registered [ 9.729208] io scheduler bfq registered [ 9.806816] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 9.820863] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 9.837195] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 9.851076] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 9.869368] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 9.882441] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 9.894664] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 9.901889] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 9.915685] versatile-pci 10001000.pci: PCI core found (slot 11) [ 9.930412] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 9.937486] pci_bus 0000:00: root bus resource [bus 00-ff] [ 9.943714] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 9.948641] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 9.954902] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 9.979757] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 9.990465] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 9.996257] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 10.001641] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 10.035309] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 10.039521] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 10.044550] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 10.049742] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 10.060827] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 10.067591] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 10.071895] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 10.081809] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 10.087893] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 10.099064] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 10.105850] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 10.115831] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 10.119893] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 10.124437] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 10.140498] PCI: bus0: Fast back to back transfers disabled [ 10.154255] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 10.160860] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 10.168631] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 10.176004] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 10.180964] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 10.186994] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 10.192559] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 10.198598] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 10.204363] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 10.208590] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 10.212439] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 10.217318] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 10.231398] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 10.242184] pci 0000:00:0f.0: quirk_usb_early_handoff+0x0/0x704 took 13341 usecs [ 10.261363] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 10.274258] clcd-pl11x: probe of 10120000.display failed with error -2 [ 10.311130] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 10.335553] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 10.347873] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 10.364110] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 10.385239] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 10.505666] random: crng init done [ 10.518848] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 10.527976] [drm] features: -virgl +edid -resource_blob -host_visible [ 10.528339] [drm] features: -context_init [ 10.540624] [drm] number of scanouts: 1 [ 10.554183] [drm] number of cap sets: 0 [ 10.649459] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 11.313909] Console: switching to colour frame buffer device 160x50 [ 11.468445] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 11.555954] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 11.575798] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 11.952227] brd: module loaded [ 11.960008] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 12.036572] virtio_blk virtio3: [vda] 959800 512-byte logical blocks (491 MB/469 MiB) [ 12.207627] physmap-flash 34000000.flash: versatile/realview flash protection [ 12.295214] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 12.319438] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 12.330259] Intel/Sharp Extended Query Table at 0x0031 [ 12.338530] Using buffer write method [ 12.660265] smc91x: not found (-19). [ 12.669133] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 12.676720] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 12.799159] rtc-ds1307 0-0068: registered as rtc0 [ 12.839825] rtc-ds1307 0-0068: setting system clock to 2024-10-13T15:19:24 UTC (1728832764) [ 12.910488] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 12.925624] rtc-pl031 101e8000.rtc: registered as rtc1 [ 12.945842] i2c_dev: i2c /dev entries driver [ 12.961615] versatile reboot driver registered [ 13.000158] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 13.139204] leds-syscon 10000008.0.led: registered LED (null) [ 13.157298] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 13.167674] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 13.179679] leds-syscon 10000008.1.led: registered LED (null) [ 13.209504] leds-syscon 10000008.2.led: registered LED (null) [ 13.250816] leds-syscon 10000008.3.led: registered LED (null) [ 13.269587] leds-syscon 10000008.4.led: registered LED (null) [ 13.287897] leds-syscon 10000008.5.led: registered LED (null) [ 13.297002] leds-syscon 10000008.6.led: registered LED (null) [ 13.308919] leds-syscon 10000008.7.led: registered LED (null) [ 13.322510] ledtrig-cpu: registered to indicate activity on CPUs [ 13.349140] usbcore: registered new interface driver usbhid [ 13.353824] usbhid: USB HID core driver [ 13.508434] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 13.514878] aaci-pl041 10004000.aaci: FIFO 512 entries [ 13.528867] u32 classifier [ 13.530997] input device check on [ 13.534948] Actions configured [ 13.556151] NET: Registered PF_INET6 protocol family [ 13.629860] Segment Routing with IPv6 [ 13.636190] In-situ OAM (IOAM) with IPv6 [ 13.674164] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 13.705587] NET: Registered PF_PACKET protocol family [ 13.714390] Bridge firewalling registered [ 13.726027] Key type dns_resolver registered [ 13.734610] NET: Registered PF_VSOCK protocol family [ 13.847558] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 14.292605] registered taskstats version 1 [ 14.559244] Key type .fscrypt registered [ 14.563710] Key type fscrypt-provisioning registered [ 14.620426] Btrfs loaded, zoned=no, fsverity=no [ 14.708918] Key type encrypted registered [ 14.740200] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.749256] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.760479] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.781018] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.788641] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.799610] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.818637] printk: console [netcon0] enabled [ 14.822220] netconsole: network logging started [ 15.046532] IP-Config: Complete: [ 15.049501] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 15.075481] host=192.168.7.2, domain=, nis-domain=(none) [ 15.079520] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 15.079924] nameserver0=8.8.8.8 [ 15.176340] clk: Disabling unused clocks [ 15.181581] ALSA device list: [ 15.187715] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 15.241605] md: Waiting for all devices to be available before autodetect [ 15.248481] md: If you don't use raid, use raid=noautodetect [ 15.252547] md: Autodetecting RAID arrays. [ 15.257444] md: autorun ... [ 15.260016] md: ... autorun DONE. [ 15.951242] EXT4-fs (vda): mounted filesystem 7cc75a5e-68ba-4799-93d1-ea427b96aea3 r/w with ordered data mode. Quota mode: disabled. [ 15.972084] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 16.015318] devtmpfs: mounted [ 16.510295] Freeing unused kernel image (initmem) memory: 460K [ 16.516446] Kernel memory protection not selected by kernel config. [ 16.524519] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 25.859130] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 25.895170] clcd-pl11x: probe of 10120000.display failed with error -2 [ 25.928066] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 25.978969] amba 10100000.smc: deferred probe pending [ 26.005841] amba 10110000.mpmc: deferred probe pending [ 26.009804] amba 101e0000.sctl: deferred probe pending [ 26.034633] amba 101e1000.watchdog: deferred probe pending [ 26.038465] amba 101f0000.sci: deferred probe pending [ 26.041578] amba 101f4000.spi: deferred probe pending [ 26.063925] amba 1000a000.sci: deferred probe pending [ 26.067507] amba 10120000.display: deferred probe pending Starting udev [ 40.488195] udevd[99]: starting version 3.2.14 [ 41.729466] udevd[100]: starting eudev-3.2.14 [ 113.977532] udevd[100]: worker [108] /devices/platform/amba/10001000.pci/pci0000:00/0000:00:11.0/virtio3/block/vda is taking a long time [ 160.045531] EXT4-fs (vda): re-mounted 7cc75a5e-68ba-4799-93d1-ea427b96aea3 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.13 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.50-yocto-standard #1 PREEMPT Tue Sep 10 20:01:48 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 13 15:23:22 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 5.0.4 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-E275MJJpMt,guid=c68d8466f922ff946e2a6cbb670be654 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[535]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=516 comm="connman-applet") dbus-daemon[535]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry