[    0.000000] Linux version 5.15.166-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Sep 6 17:42:25 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 1dc30001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 372136061 cycles
[    0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000004] tsc: Detected 2750.000 MHz processor
[    0.000767] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000813] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002709] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.002822] ACPI: Early table checksum verification disabled
[    0.002824] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.002829] ACPI: RSDT 0x000000001FFE246E 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002833] ACPI: FACP 0x000000001FFE224E 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002836] ACPI: DSDT 0x000000001FFE0040 00220E (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002838] ACPI: FACS 0x000000001FFE0000 000040
[    0.002840] ACPI: APIC 0x000000001FFE2342 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002842] ACPI: HPET 0x000000001FFE23D2 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002843] ACPI: MCFG 0x000000001FFE240A 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002845] ACPI: WAET 0x000000001FFE2446 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002847] ACPI: Reserving FACP table memory at [mem 0x1ffe224e-0x1ffe2341]
[    0.002848] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe224d]
[    0.002849] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002849] ACPI: Reserving APIC table memory at [mem 0x1ffe2342-0x1ffe23d1]
[    0.002850] ACPI: Reserving HPET table memory at [mem 0x1ffe23d2-0x1ffe2409]
[    0.002851] ACPI: Reserving MCFG table memory at [mem 0x1ffe240a-0x1ffe2445]
[    0.002851] ACPI: Reserving WAET table memory at [mem 0x1ffe2446-0x1ffe246d]
[    0.002879] Zone ranges:
[    0.002880]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002881]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002882]   Normal   empty
[    0.002883] Movable zone start for each node
[    0.002883] Early memory node ranges
[    0.002884]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002885]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002886] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.002996] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003009] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003665] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.006637] ACPI: PM-Timer IO Port: 0x608
[    0.006643] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.006668] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.006670] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.006672] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.006673] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.006674] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.006674] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.006676] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.006677] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.006679] TSC deadline timer available
[    0.006682] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.006695] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.006696] Booting paravirtualized kernel on KVM
[    0.006697] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.006700] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.006854] percpu: Embedded 54 pages/cpu s182360 r8192 d30632 u524288
[    0.006876] kvm-guest: stealtime: cpu 0, msr 1f41b140
[    0.006878] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.006879] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.006921] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.006930] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.007081] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.007574] Memory: 482184K/523736K available (16394K kernel code, 2129K rwdata, 3632K rodata, 1896K init, 1960K bss, 41292K reserved, 0K cma-reserved)
[    0.007595] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.007603] ftrace: allocating 45598 entries in 179 pages
[    0.024879] ftrace: allocated 179 pages with 5 groups
[    0.025027] rcu: Preemptible hierarchical RCU implementation.
[    0.025029] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.025030] 	All grace periods are expedited (rcu_expedited).
[    0.025030] 	Trampoline variant of Tasks RCU enabled.
[    0.025031] 	Rude variant of Tasks RCU enabled.
[    0.025031] 	Tracing variant of Tasks RCU enabled.
[    0.025032] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.025033] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.027644] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.027851] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.027858] random: crng init done
[    0.034115] Console: colour VGA+ 80x25
[    0.130063] printk: console [ttyS0] enabled
[    0.130678] ACPI: Core revision 20210730
[    0.131394] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.132805] APIC: Switch to symmetric I/O mode setup
[    0.133754] x2apic enabled
[    0.134455] Switched APIC routing to physical x2apic.
[    0.136306] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.137238] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.138780] Calibrating delay loop (skipped) preset value.. 5500.00 BogoMIPS (lpj=2750000)
[    0.139898] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.140780] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.141780] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.142781] Spectre V2 : Mitigation: Retpolines
[    0.143441] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.143780] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.144780] Speculative Store Bypass: Vulnerable
[    0.145469] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.145780] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.146780] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.147701] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.147780] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.161943] Freeing SMP alternatives memory: 48K
[    0.162633] pid_max: default: 32768 minimum: 301
[    0.162793] LSM: Security Framework initializing
[    0.163784] landlock: Up and running.
[    0.164445] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.164780] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.165958] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.166851] Performance Events: AMD PMU driver.
[    0.167545] ... version:                0
[    0.167782] ... bit width:              48
[    0.168386] ... generic registers:      4
[    0.168781] ... value mask:             0000ffffffffffff
[    0.169556] ... max period:             00007fffffffffff
[    0.169782] ... fixed-purpose events:   0
[    0.170374] ... event mask:             000000000000000f
[    0.170813] signal: max sigframe size: 1776
[    0.171437] rcu: Hierarchical SRCU implementation.
[    0.171906] smp: Bringing up secondary CPUs ...
[    0.172622] x86: Booting SMP configuration:
[    0.172782] .... node  #0, CPUs:      #1
[    0.107985] kvm-clock: cpu 1, msr 1dc30041, secondary cpu clock
[    0.185957] kvm-guest: stealtime: cpu 1, msr 1f49b140
[    0.189829]  #2
[    0.107985] kvm-clock: cpu 2, msr 1dc30081, secondary cpu clock
[    0.202318] kvm-guest: stealtime: cpu 2, msr 1f51b140
[    0.205823]  #3
[    0.107985] kvm-clock: cpu 3, msr 1dc300c1, secondary cpu clock
[    0.218666] kvm-guest: stealtime: cpu 3, msr 1f59b140
[    0.221801] smp: Brought up 1 node, 4 CPUs
[    0.222784] smpboot: Max logical packages: 1
[    0.223389] smpboot: Total of 4 processors activated (22000.00 BogoMIPS)
[    0.224225] devtmpfs: initialized
[    0.224856] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.225784] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.226784] pinctrl core: initialized pinctrl subsystem
[    0.227659] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.227845] thermal_sys: Registered thermal governor 'step_wise'
[    0.227846] thermal_sys: Registered thermal governor 'user_space'
[    0.228793] cpuidle: using governor menu
[    0.231947] ACPI: bus type PCI registered
[    0.233970] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.237789] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.240803] PCI: Using configuration type 1 for base access
[    0.243801] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.262782] raid6: sse2x4   gen() 24505 MB/s
[    0.279783] raid6: sse2x4   xor()  3448 MB/s
[    0.296781] raid6: sse2x2   gen() 26727 MB/s
[    0.313782] raid6: sse2x2   xor() 19179 MB/s
[    0.330782] raid6: sse2x1   gen()  6769 MB/s
[    0.347782] raid6: sse2x1   xor() 16864 MB/s
[    0.348406] raid6: using algorithm sse2x2 gen() 26727 MB/s
[    0.348782] raid6: .... xor() 19179 MB/s, rmw enabled
[    0.349512] raid6: using ssse3x2 recovery algorithm
[    0.349817] ACPI: Added _OSI(Module Device)
[    0.350417] ACPI: Added _OSI(Processor Device)
[    0.350782] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.351452] ACPI: Added _OSI(Processor Aggregator Device)
[    0.351787] ACPI: Added _OSI(Linux-Dell-Video)
[    0.352427] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.352782] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.353939] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.355539] ACPI: Interpreter enabled
[    0.355788] ACPI: PM: (supports S0 S3 S5)
[    0.356356] ACPI: Using IOAPIC for interrupt routing
[    0.356793] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.357824] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.359338] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.359784] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.360809] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.361698] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.361802] PCI host bridge to bus 0000:00
[    0.362395] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.362782] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.363736] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.363783] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.364782] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.365782] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.366782] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.367611] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.368308] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.369783] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.371260] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.374394] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.375782] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.377991] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.379228] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.381424] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.382805] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.384176] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.387102] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.388419] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.389782] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.390790] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.392422] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.393592] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.394480] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.396784] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.400002] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.401782] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.403060] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.404782] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.406020] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.407782] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.409050] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.410025] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.412347] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.413237] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.413999] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.416392] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.417091] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.418411] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.419743] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.420443] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.420832] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.421831] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.422719] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.422826] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.423719] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.423827] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.424714] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.424802] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.425648] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.425784] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.426633] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.426783] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.427645] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.427784] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.428631] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.428922] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.429652] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.429783] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.430595] vgaarb: loaded
[    0.430816] SCSI subsystem initialized
[    0.431361] ACPI: bus type USB registered
[    0.431791] usbcore: registered new interface driver usbfs
[    0.432583] usbcore: registered new interface driver hub
[    0.432785] usbcore: registered new device driver usb
[    0.433503] pps_core: LinuxPPS API ver. 1 registered
[    0.433782] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.434782] PTP clock support registered
[    0.435358] Bluetooth: Core ver 2.22
[    0.435785] NET: Registered PF_BLUETOOTH protocol family
[    0.436535] Bluetooth: HCI device and connection manager initialized
[    0.436783] Bluetooth: HCI socket layer initialized
[    0.437477] Bluetooth: L2CAP socket layer initialized
[    0.437783] Bluetooth: SCO socket layer initialized
[    0.438482] PCI: Using ACPI for IRQ routing
[    0.501809] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.502521] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.505825] clocksource: Switched to clocksource kvm-clock
[    0.510256] pnp: PnP ACPI init
[    0.510807] system 00:07: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.511992] pnp: PnP ACPI: found 8 devices
[    0.519471] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.520754] NET: Registered PF_INET protocol family
[    0.521465] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.522619] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.523835] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.525944] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.527042] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.528069] TCP: Hash tables configured (established 4096 bind 4096)
[    0.528981] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.529908] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.530920] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.532122] RPC: Registered named UNIX socket transport module.
[    0.534197] RPC: Registered udp transport module.
[    0.535870] RPC: Registered tcp transport module.
[    0.537533] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.539779] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.541955] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.544091] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.546472] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.548868] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.551263] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.554087] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.557721] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.560405] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.563046] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.565626] PCI: CLS 0 bytes, default 64
[    0.567092] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bf99648, max_idle_ns: 440795298667 ns
[    0.625435] Initialise system trusted keyrings
[    0.626161] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.627796] NFS: Registering the id_resolver key type
[    0.628510] Key type id_resolver registered
[    0.629101] Key type id_legacy registered
[    0.629996] Key type cifs.idmap registered
[    0.633140] xor: automatically using best checksumming function   avx       
[    0.634131] Key type asymmetric registered
[    0.634708] Asymmetric key parser 'x509' registered
[    0.635399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.636427] io scheduler mq-deadline registered
[    0.637058] io scheduler kyber registered
[    0.637770] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.640075] ACPI: button: Power Button [PWRF]
[    0.642334] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.647480] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.651513] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.655560] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.659618] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.662106] 00:03: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.665051] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.667957] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.671692] Linux agpgart interface v0.103
[    0.673462] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.676312] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.715453] Console: switching to colour dummy device 80x25
[    0.717828] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.721561] [drm] number of scanouts: 1
[    0.722938] [drm] number of cap sets: 0
[    0.724777] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.727598] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.729760] Console: switching to colour frame buffer device 128x48
[    0.759938] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.762418] brd: module loaded
[    0.763585] loop: module loaded
[    0.765163] virtio_blk virtio3: [vda] 906964 512-byte logical blocks (464 MB/443 MiB)
[    0.767972] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.769162] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.770736] scsi host0: ahci
[    0.772145] scsi host1: ahci
[    0.773604] scsi host2: ahci
[    0.775074] scsi host3: ahci
[    0.776521] scsi host4: ahci
[    0.778018] scsi host5: ahci
[    0.779298] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.782338] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.785405] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.788459] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.791526] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.794558] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.800265] e100: Intel(R) PRO/100 Network Driver
[    0.801953] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.804237] e1000: Intel(R) PRO/1000 Network Driver
[    0.806257] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.808658] e1000e: Intel(R) PRO/1000 Network Driver
[    0.810716] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.813178] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.815426] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.817755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.820459] ehci-pci: EHCI PCI platform driver
[    0.823319] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.825507] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.828948] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.838051] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.840647] hub 1-0:1.0: USB hub found
[    0.841977] hub 1-0:1.0: 6 ports detected
[    0.844100] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.846514] ohci-pci: OHCI PCI platform driver
[    0.848363] uhci_hcd: USB Universal Host Controller Interface driver
[    0.851902] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.854086] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.857344] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c100
[    0.860054] hub 2-0:1.0: USB hub found
[    0.861660] hub 2-0:1.0: 2 ports detected
[    0.864399] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.866955] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.870282] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c120
[    0.872518] hub 3-0:1.0: USB hub found
[    0.873534] hub 3-0:1.0: 2 ports detected
[    0.874589] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.875352] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.876518] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c140
[    0.877538] hub 4-0:1.0: USB hub found
[    0.878096] hub 4-0:1.0: 2 ports detected
[    0.878743] usbcore: registered new interface driver usb-storage
[    0.879609] usbcore: registered new interface driver usbserial_generic
[    0.880561] usbserial: USB Serial support registered for generic
[    0.881495] usbcore: registered new interface driver ftdi_sio
[    0.882315] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.883349] usbcore: registered new interface driver pl2303
[    0.884137] usbserial: USB Serial support registered for pl2303
[    0.884974] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.886848] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.887567] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.888365] mousedev: PS/2 mouse device common for all mice
[    0.889261] rtc_cmos 00:06: RTC can wake from S4
[    0.890446] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.891831] rtc_cmos 00:06: registered as rtc0
[    0.892733] rtc_cmos 00:06: setting system clock to 2024-10-16T14:16:59 UTC (1729088219)
[    0.893946] rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.895340] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.896275] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.897149] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.898560] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.900475] sdhci: Secure Digital Host Controller Interface driver
[    0.901556] sdhci: Copyright(c) Pierre Ossman
[    0.902184] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.903026] usbcore: registered new interface driver usbhid
[    0.903817] usbhid: USB HID core driver
[    0.904375] u32 classifier
[    0.904765]     input device check on
[    0.905286]     Actions configured
[    0.905869] NET: Registered PF_INET6 protocol family
[    0.906828] Segment Routing with IPv6
[    0.907371] In-situ OAM (IOAM) with IPv6
[    0.907939] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.908829] NET: Registered PF_PACKET protocol family
[    0.909547] Bridge firewalling registered
[    0.910126] Key type dns_resolver registered
[    0.910783] NET: Registered PF_VSOCK protocol family
[    0.911796] IPI shorthand broadcast: enabled
[    0.912419] sched_clock: Marking stable (805418860, 106985120)->(965180970, -52776990)
[    0.913572] Loading compiled-in X.509 certificates
[    0.914401] Key type .fscrypt registered
[    0.914954] Key type fscrypt-provisioning registered
[    0.915786] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.917108] Key type encrypted registered
[    0.917730] printk: console [netcon0] enabled
[    0.918349] netconsole: network logging started
[    1.088051] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.108015] ata5: SATA link down (SStatus 0 SControl 300)
[    1.109102] ata6: SATA link down (SStatus 0 SControl 300)
[    1.111401] ata2: SATA link down (SStatus 0 SControl 300)
[    1.113610] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.114688] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.115513] ata3.00: applying bridge limits
[    1.116436] ata4: SATA link down (SStatus 0 SControl 300)
[    1.118695] ata1: SATA link down (SStatus 0 SControl 300)
[    1.120747] ata3.00: configured for UDMA/100
[    1.121829] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.144662] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.147002] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.224206] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[    1.228628] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.521205] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    1.536998] IP-Config: Complete:
[    1.537504]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.538914]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.539734]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.539734]      nameserver0=8.8.8.8
[    1.541319] clk: Disabling unused clocks
[    1.542181] md: Waiting for all devices to be available before autodetect
[    1.543164] md: If you don't use raid, use raid=noautodetect
[    1.543963] md: Autodetecting RAID arrays.
[    1.544545] md: autorun ...
[    1.544951] md: ... autorun DONE.
[    1.546861] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    1.550256] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.552624] devtmpfs: mounted
[    1.554620] Freeing unused kernel image (initmem) memory: 1896K
[    1.556714] Write protecting the kernel read-only data: 22528k
[    1.559329] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.561779] Freeing unused kernel image (rodata/data gap) memory: 464K
[    1.564061] Run /sbin/init as init process
INIT: version 3.01 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.611051] udevd[166]: starting version 3.2.10
[    1.615441] udevd[167]: starting eudev-3.2.10
[    1.765811] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.15.166-yocto-standard #1 SMP PREEMPT Fri Sep 6 17:42:25 UTC 2024 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 16 14:17:00 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCM2B+WWouEnlXvrS/FKXu2wIiIOo2NNJAnxKW0iP/e29shGw8lTQWmSzYFOQuD2L8A1/jT2+A0zoGGtSBpNEhTrpW99VR9RMQnFIXO2uEj72AQIV5zvC4bRED6rbStRywDTGn16g3p1b1tj7wv86Z6K46M2KiRBLO+Wx9qn/aKgyp7mLzUVVr0SNbkT3budNWHZ53Q99LRGQfdlUXB4oBR65k/L2dO4LNLtF93d5tkSPjhD5fwfn8cfxFV4hHi0Rgeb2fXNLxLkGigbyUxfOp9saFBsDllpErE4RnYhm7Yt0KI2XYnUbGX3uC+M35GfyVzHWJvC+MpXFnlpK5IRXQ3 root@qemux86-64
Fingerprint: sha1!! 29:b9:00:77:4a:fb:79:95:9e:c8:1d:ca:a9:e6:ce:30:d9:68:49:86
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.121327] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.122362] Bluetooth: BNEP filters: protocol multicast
[    2.123138] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-HK3Eq51OJL,guid=f1b065504b2bcf7681741684670fcadc
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu

Poky (Yocto Project Reference Distro) 4.0.22 qemux86-64 /dev/ttyS0

qemux86-64 login: libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[652]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=657 comm="matchbox-desktop")
dbus-daemon[652]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(connman-applet:625): Gdk-[1;35mCRITICAL[0m **: [34m14:17:00.305[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
