[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 6.10.8-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 PREEMPT Thu Sep  5 19:44:37 UTC 2024
[    0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] OF: fdt: Machine model: ARM Versatile PB
[    0.000000] Memory policy: Data cache writeback
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
[    0.000000] Kernel command line: root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65536
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 240632K/262144K available (11021K kernel code, 1478K rwdata, 3000K rodata, 472K init, 357K bss, 21512K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 43702 entries in 129 pages
[    0.000000] ftrace: allocated 129 pages with 2 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41
[    0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000132] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000448] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.003470] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[    0.005652] Console: colour dummy device 80x30
[    0.006870] Calibrating delay loop... 1875.96 BogoMIPS (lpj=9379840)
[    0.229571] CPU: Testing write buffer coherency: ok
[    0.230624] pid_max: default: 32768 minimum: 301
[    0.231681] LSM: initializing lsm=capability,landlock
[    0.232103] landlock: Up and running.
[    0.233943] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.233991] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.263121] Setting up static identity map for 0x8400 - 0x8458
[    0.263909] rcu: Hierarchical SRCU implementation.
[    0.263953] rcu: 	Max phase no-delay instances is 1000.
[    0.273926] devtmpfs: initialized
[    0.283736] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0
[    0.284563] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.284664] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.291347] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.294265] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.305179] platform bridge: Fixed dependency cycle(s) with /vga
[    0.305924] platform vga: Fixed dependency cycle(s) with /bridge
[    0.316704] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000
[    0.316899] amba 10120000.display: Fixed dependency cycle(s) with /bridge
[    0.317040] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.320544] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0
[    0.320738] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000
[    0.324322] Serial: AMBA PL011 UART driver
[    0.330184] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.331211] printk: legacy console [ttyAMA0] enabled
[    0.364687] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.366799] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1
[    0.368490] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable.
[    0.371006] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1
[    0.374872] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.729457] raid6: int32x8  gen()   116 MB/s
[    1.069403] raid6: int32x4  gen()   137 MB/s
[    1.346905] raid6: int32x2  gen()   669 MB/s
[    1.509536] raid6: int32x1  gen()   804 MB/s
[    1.509983] raid6: using algorithm int32x1 gen() 804 MB/s
[    1.679625] raid6: .... xor() 148 MB/s, rmw enabled
[    1.680092] raid6: using intx1 recovery algorithm
[    1.682789] SCSI subsystem initialized
[    1.683942] usbcore: registered new interface driver usbfs
[    1.684492] usbcore: registered new interface driver hub
[    1.687283] usbcore: registered new device driver usb
[    1.690617] pps_core: LinuxPPS API ver. 1 registered
[    1.690972] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.691618] PTP clock support registered
[    1.693784] Advanced Linux Sound Architecture Driver Initialized.
[    1.704043] vgaarb: loaded
[    1.705976] clocksource: Switched to clocksource arm,sp804
[    1.790219] NET: Registered PF_INET protocol family
[    1.792221] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.798747] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    1.799369] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.799911] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.800443] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    1.800967] TCP: Hash tables configured (established 2048 bind 2048)
[    1.802238] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    1.802875] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    1.804485] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.807639] RPC: Registered named UNIX socket transport module.
[    1.808090] RPC: Registered udp transport module.
[    1.808397] RPC: Registered tcp transport module.
[    1.808693] RPC: Registered tcp-with-tls transport module.
[    1.809027] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.809520] PCI: CLS 0 bytes, default 32
[    1.810279] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.816750] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.820747] NFS: Registering the id_resolver key type
[    1.821970] Key type id_resolver registered
[    1.822279] Key type id_legacy registered
[    1.825789] Key type cifs.idmap registered
[    1.980082] xor: measuring software checksum speed
[    1.986672]    arm4regs        :  1687 MB/sec
[    1.992030]    8regs           :  1991 MB/sec
[    1.997740]    32regs          :  1901 MB/sec
[    1.998089] xor: using function: 8regs (1991 MB/sec)
[    1.998888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.999466] io scheduler mq-deadline registered
[    1.999819] io scheduler kyber registered
[    2.000351] io scheduler bfq registered
[    2.007327] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered
[    2.008603] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered
[    2.009940] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered
[    2.011129] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered
[    2.012190] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges:
[    2.013213] versatile-pci 10001000.pci:       IO 0x0043000000..0x004300ffff -> 0x0000000000
[    2.014116] versatile-pci 10001000.pci:      MEM 0x0050000000..0x005fffffff -> 0x0050000000
[    2.014699] versatile-pci 10001000.pci:      MEM 0x0060000000..0x006fffffff -> 0x0060000000
[    2.016308] versatile-pci 10001000.pci: PCI core found (slot 11)
[    2.017970] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00
[    2.018564] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.019130] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.019550] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff]
[    2.020006] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref]
[    2.021989] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 conventional PCI endpoint
[    2.023126] pci 0000:00:0c.0: BAR 0 [io  0x0000-0x00ff]
[    2.023527] pci 0000:00:0c.0: BAR 1 [mem 0x00000000-0x000003ff]
[    2.023907] pci 0000:00:0c.0: BAR 2 [mem 0x00000000-0x00001fff]
[    2.026978] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    2.027554] pci 0000:00:0d.0: BAR 0 [io  0x0000-0x001f]
[    2.027954] pci 0000:00:0d.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.028407] pci 0000:00:0d.0: ROM [mem 0x00000000-0x0003ffff pref]
[    2.029223] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.029763] pci 0000:00:0e.0: BAR 0 [io  0x0000-0x001f]
[    2.030106] pci 0000:00:0e.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.030879] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 conventional PCI endpoint
[    2.031421] pci 0000:00:0f.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.032166] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.032711] pci 0000:00:10.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.033482] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    2.034013] pci 0000:00:11.0: BAR 0 [io  0x0000-0x007f]
[    2.034360] pci 0000:00:11.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.035839] PCI: bus0: Fast back to back transfers disabled
[    2.037295] pci 0000:00:0d.0: ROM [mem 0x60000000-0x6003ffff pref]: assigned
[    2.037926] pci 0000:00:0d.0: BAR 4 [mem 0x60040000-0x60043fff 64bit pref]: assigned
[    2.038523] pci 0000:00:0e.0: BAR 4 [mem 0x60044000-0x60047fff 64bit pref]: assigned
[    2.039039] pci 0000:00:0f.0: BAR 0 [mem 0x50000000-0x50003fff 64bit]: assigned
[    2.039506] pci 0000:00:10.0: BAR 4 [mem 0x60048000-0x6004bfff 64bit pref]: assigned
[    2.039980] pci 0000:00:11.0: BAR 4 [mem 0x6004c000-0x6004ffff 64bit pref]: assigned
[    2.040448] pci 0000:00:0c.0: BAR 2 [mem 0x50004000-0x50005fff]: assigned
[    2.040896] pci 0000:00:0c.0: BAR 1 [mem 0x50006000-0x500063ff]: assigned
[    2.041330] pci 0000:00:0c.0: BAR 0 [io  0x1000-0x10ff]: assigned
[    2.041729] pci 0000:00:11.0: BAR 0 [io  0x1400-0x147f]: assigned
[    2.042110] pci 0000:00:0d.0: BAR 0 [io  0x1480-0x149f]: assigned
[    2.042477] pci 0000:00:0e.0: BAR 0 [io  0x14a0-0x14bf]: assigned
[    2.043897] pci 0000:00:0f.0: enabling device (0100 -> 0102)
[    2.046385] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103)
[    2.048605] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103)
[    2.049797] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102)
[    2.052173] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103)
[    2.054407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.065780] random: crng init done
[    2.068163] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0
[    2.068961] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.068987] [drm] features: -context_init
[    2.069869] [drm] number of scanouts: 1
[    2.070140] [drm] number of cap sets: 0
[    2.079886] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0
[    2.165241] Console: switching to colour frame buffer device 160x50
[    2.184764] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    2.198740] versatile-tft-panel 10000000.sysreg:display@0: no panel detected
[    2.200588] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.233497] brd: module loaded
[    2.234155] virtio_blk virtio3: 1/0/0 default/read/poll queues
[    2.237927] virtio_blk virtio3: [vda] 973798 512-byte logical blocks (499 MB/475 MiB)
[    2.249074] physmap-flash 34000000.flash: versatile/realview flash protection
[    2.257421] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff]
[    2.259744] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000
[    2.260739] Intel/Sharp Extended Query Table at 0x0031
[    2.261663] Using buffer write method
[    2.281287] smc91x: not found (-19).
[    2.281979] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found
[    2.282556] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000
[    2.310977] rtc-ds1307 0-0068: registered as rtc0
[    2.324432] rtc-ds1307 0-0068: setting system clock to 2024-10-17T19:02:43 UTC (1729191763)
[    2.329156] rtc-pl031 101e8000.rtc: registered as rtc1
[    2.329984] i2c_dev: i2c /dev entries driver
[    2.331033] versatile reboot driver registered
[    2.332858] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    2.340122] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio)
[    2.344546] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio)
[    2.346163] leds-syscon 10000008.0.led: registered LED (null)
[    2.347950] leds-syscon 10000008.1.led: registered LED (null)
[    2.349851] leds-syscon 10000008.2.led: registered LED (null)
[    2.350653] leds-syscon 10000008.3.led: registered LED (null)
[    2.351302] leds-syscon 10000008.4.led: registered LED (null)
[    2.351944] leds-syscon 10000008.5.led: registered LED (null)
[    2.352582] leds-syscon 10000008.6.led: registered LED (null)
[    2.353227] leds-syscon 10000008.7.led: registered LED (null)
[    2.354165] ledtrig-cpu: registered to indicate activity on CPUs
[    2.356691] usbcore: registered new interface driver usbhid
[    2.357085] usbhid: USB HID core driver
[    2.378364] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    2.378941] aaci-pl041 10004000.aaci: FIFO 512 entries
[    2.380001] u32 classifier
[    2.380209]     input device check on
[    2.380439]     Actions configured
[    2.382265] NET: Registered PF_INET6 protocol family
[    2.388749] Segment Routing with IPv6
[    2.389217] In-situ OAM (IOAM) with IPv6
[    2.390030] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.392690] NET: Registered PF_PACKET protocol family
[    2.393441] Bridge firewalling registered
[    2.394378] Key type dns_resolver registered
[    2.395179] NET: Registered PF_VSOCK protocol family
[    2.398001] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0
[    2.428099] registered taskstats version 1
[    2.453658] Key type .fscrypt registered
[    2.453988] Key type fscrypt-provisioning registered
[    2.459351] Btrfs loaded, zoned=no, fsverity=no
[    2.468247] Key type encrypted registered
[    2.472363] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.474307] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    2.475783] printk: legacy console [netcon0] enabled
[    2.476482] netconsole: network logging started
[    3.030926] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2
[    3.040412] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[    3.109101] IP-Config: Complete:
[    3.109703]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    3.111154]      host=192.168.7.2, domain=, nis-domain=(none)
[    3.111866]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.111942]      nameserver0=8.8.8.8
[    3.127510] clk: Disabling unused clocks
[    3.128630] ALSA device list:
[    3.129113]   #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40
[    3.140061] md: Waiting for all devices to be available before autodetect
[    3.140985] md: If you don't use raid, use raid=noautodetect
[    3.141734] md: Autodetecting RAID arrays.
[    3.142282] md: autorun ...
[    3.142689] md: ... autorun DONE.
[    3.224883] EXT4-fs (vda): mounted filesystem b96c75d1-fd20-4ac3-954c-0c9df3a9c536 r/w with ordered data mode. Quota mode: disabled.
[    3.226264] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.228384] devtmpfs: mounted
[    3.263529] Freeing unused kernel image (initmem) memory: 472K
[    3.263994] Kernel memory protection not selected by kernel config.
[    3.264719] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    6.083328] udevd[108]: starting version 3.2.14
[    6.184068] udevd[109]: starting eudev-3.2.14
[   11.167116] EXT4-fs (vda): re-mounted b96c75d1-fd20-4ac3-954c-0c9df3a9c536 r/w. Quota mode: disabled.
[   13.289178] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110
[   13.297268] amba 10100000.smc: deferred probe pending: (reason unknown)
[   13.298102] amba 10110000.mpmc: deferred probe pending: (reason unknown)
[   13.298792] amba 101e0000.sctl: deferred probe pending: (reason unknown)
[   13.299458] amba 101e1000.watchdog: deferred probe pending: (reason unknown)
[   13.300186] amba 101f0000.sci: deferred probe pending: (reason unknown)
[   13.300862] amba 101f4000.spi: deferred probe pending: (reason unknown)
[   13.301530] amba 1000a000.sci: deferred probe pending: (reason unknown)
[   13.302189] amba 10120000.display: deferred probe pending: (reason unknown)
ALSA: Restoring mixer settings...
alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
No state is present for card Interface
alsa-lib /usr/src/debug/alsa-lib/1.2.12/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" ""
Hardware is initialized using a generic method
No state is present for card Interface
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarmv5 6.10.8-yocto-standard #1 PREEMPT Thu Sep  5 19:44:37 UTC 2024 armv5tejl
Kernel command line: root=/dev/vda rw  mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 17 19:02:57 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemuarmv5 /dev/ttyAMA0

qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-zW1riUWrs0,guid=84587ae3d4b40593c3cd68f767115f6a
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[553]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=528 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[553]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:563): Gtk-[1;33mWARNING[0m **: [34m19:04:05.463[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:563): [1;33mWARNING[0m **: [34m19:04:05.560[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
