[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377493 ns
[    0.000366] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns
[    0.010653] Console: colour dummy device 80x25
[    0.011342] printk: legacy console [tty0] enabled
[    0.012007] printk: legacy bootconsole [uart8250] disabled
[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945377493 ns
[    0.000366] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421772796ns
[    0.010653] Console: colour dummy device 80x25
[    0.011342] printk: legacy console [tty0] enabled
[    0.012007] printk: legacy bootconsole [uart8250] disabled
[    0.013813] Calibrating delay loop... 1889.07 BogoMIPS (lpj=9445376)
[    0.069486] pid_max: default: 32768 minimum: 301
[    0.070495] LSM: initializing lsm=capability,landlock
[    0.070924] landlock: Up and running.
[    0.073014] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.073115] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.098946] Performance counters: No available PMU.
[    0.099923] rcu: Hierarchical SRCU implementation.
[    0.099972] rcu: 	Max phase no-delay instances is 1000.
[    0.104615] smp: Bringing up secondary CPUs ...
[    0.104768] smp: Brought up 1 node, 1 CPU
[    0.114085] devtmpfs: initialized
[    0.118834] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.119008] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.125538] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.139209] LOGIC PIO: addr 0x00000070 not registered in io_range_list
[    0.492093] raid6: int32x8  gen()   452 MB/s
[    0.782054] raid6: int32x4  gen()   978 MB/s
[    0.947996] raid6: int32x2  gen()  1199 MB/s
[    1.119994] raid6: int32x1  gen()   811 MB/s
[    1.120216] raid6: using algorithm int32x2 gen() 1199 MB/s
[    1.292186] raid6: .... xor() 642 MB/s, rmw enabled
[    1.292303] raid6: using intx1 recovery algorithm
[    1.294451] SCSI subsystem initialized
[    1.294821] usbcore: registered new interface driver usbfs
[    1.295026] usbcore: registered new interface driver hub
[    1.295158] usbcore: registered new device driver usb
[    1.295387] pps_core: LinuxPPS API ver. 1 registered
[    1.295420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.295515] PTP clock support registered
[    1.307567] PCI host bridge to bus 0000:00
[    1.307824] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.308159] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.308267] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.309327] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 conventional PCI endpoint
[    1.309898] pci 0000:00:00.0: [Firmware Bug]: BAR 0: invalid; can't size
[    1.309989] pci 0000:00:00.0: [Firmware Bug]: BAR 1: invalid; can't size
[    1.310072] pci 0000:00:00.0: [Firmware Bug]: BAR 2: invalid; can't size
[    1.310115] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
[    1.310162] pci 0000:00:00.0: [Firmware Bug]: BAR 4: invalid; can't size
[    1.310211] pci 0000:00:00.0: [Firmware Bug]: BAR 5: invalid; can't size
[    1.312106] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 conventional PCI endpoint
[    1.312605] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 conventional PCI endpoint
[    1.312829] pci 0000:00:0a.1: BAR 4 [io  0x0000-0x000f]
[    1.312914] pci 0000:00:0a.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    1.312957] pci 0000:00:0a.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    1.313010] pci 0000:00:0a.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    1.313050] pci 0000:00:0a.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    1.313294] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 conventional PCI endpoint
[    1.313402] pci 0000:00:0a.2: BAR 4 [io  0x0000-0x001f]
[    1.313782] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    1.314167] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.314258] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.314587] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    1.314659] pci 0000:00:12.0: BAR 0 [mem 0x00000000-0x00ffffff pref]
[    1.314742] pci 0000:00:12.0: BAR 2 [mem 0x00000000-0x00000fff]
[    1.314800] pci 0000:00:12.0: ROM [mem 0x00000000-0x0000ffff pref]
[    1.315095] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    1.315169] pci 0000:00:13.0: BAR 0 [io  0x0000-0x001f]
[    1.315246] pci 0000:00:13.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.315318] pci 0000:00:13.0: ROM [mem 0x00000000-0x0003ffff pref]
[    1.315561] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.315633] pci 0000:00:14.0: BAR 0 [io  0x0000-0x001f]
[    1.315697] pci 0000:00:14.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.315943] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    1.316013] pci 0000:00:15.0: BAR 0 [io  0x0000-0x007f]
[    1.316079] pci 0000:00:15.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.316557] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.317562] pci 0000:00:12.0: BAR 0 [mem 0x10000000-0x10ffffff pref]: assigned
[    1.317781] pci 0000:00:13.0: ROM [mem 0x11000000-0x1103ffff pref]: assigned
[    1.317852] pci 0000:00:12.0: ROM [mem 0x11040000-0x1104ffff pref]: assigned
[    1.317900] pci 0000:00:13.0: BAR 4 [mem 0x11050000-0x11053fff 64bit pref]: assigned
[    1.317992] pci 0000:00:14.0: BAR 4 [mem 0x11054000-0x11057fff 64bit pref]: assigned
[    1.318049] pci 0000:00:15.0: BAR 4 [mem 0x11058000-0x1105bfff 64bit pref]: assigned
[    1.318117] pci 0000:00:12.0: BAR 2 [mem 0x1105c000-0x1105cfff]: assigned
[    1.318177] pci 0000:00:15.0: BAR 0 [io  0x1080-0x10ff]: assigned
[    1.318220] pci 0000:00:0a.2: BAR 4 [io  0x1040-0x105f]: assigned
[    1.318253] pci 0000:00:13.0: BAR 0 [io  0x1060-0x107f]: assigned
[    1.318291] pci 0000:00:14.0: BAR 0 [io  0x1400-0x141f]: assigned
[    1.318328] pci 0000:00:0a.1: BAR 4 [io  0x1420-0x142f]: assigned
[    1.319828] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.319914] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.319977] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.320066] vgaarb: loaded
[    1.321489] clocksource: Switched to clocksource MIPS
[    1.340220] NET: Registered PF_INET protocol family
[    1.341068] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.346063] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.346175] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.346258] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.346401] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.346540] TCP: Hash tables configured (established 2048 bind 2048)
[    1.347452] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.347633] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.348731] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.350514] RPC: Registered named UNIX socket transport module.
[    1.350581] RPC: Registered udp transport module.
[    1.350611] RPC: Registered tcp transport module.
[    1.350639] RPC: Registered tcp-with-tls transport module.
[    1.350666] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.351270] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.351942] PCI: CLS 0 bytes, default 16
[    1.357917] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.360102] NFS: Registering the id_resolver key type
[    1.361017] Key type id_resolver registered
[    1.361081] Key type id_legacy registered
[    1.362528] Key type cifs.idmap registered
[    1.595771] xor: measuring software checksum speed
[    1.597834]    8regs           :  1710 MB/sec
[    1.599992]    8regs_prefetch  :  1551 MB/sec
[    1.601946]    32regs          :  1706 MB/sec
[    1.604005]    32regs_prefetch :  1624 MB/sec
[    1.604055] xor: using function: 8regs (1710 MB/sec)
[    1.604351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.604484] io scheduler mq-deadline registered
[    1.604549] io scheduler kyber registered
[    1.608107] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.610305] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.611311] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.612862] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.618286] printk: legacy console [ttyS0] disabled
[    1.636507] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.636596] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.637812] printk: legacy console [ttyS0] enabled
[    1.720221] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.720815] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    1.721153] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    1.727256] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    1.728884] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    1.729881] [drm] Found bochs VGA, ID 0xb0c5.
[    1.730235] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    1.733525] [drm] Found EDID data blob.
[    1.738293] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    1.774058] Console: switching to colour frame buffer device 160x50
[    1.782263] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.821519] brd: module loaded
[    1.822286] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    1.826521] virtio_blk virtio2: [vda] 1162890 512-byte logical blocks (595 MB/568 MiB)
[    1.843688] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    1.844915] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    1.846195] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    1.852345] hub 1-0:1.0: USB hub found
[    1.853157] hub 1-0:1.0: 2 ports detected
[    1.858008] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.859106] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.862435] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.864904] usbcore: registered new interface driver usbhid
[    1.867990] usbhid: USB HID core driver
[    1.868685] u32 classifier
[    1.868944]     input device check on
[    1.869243]     Actions configured
[    1.871012] NET: Registered PF_INET6 protocol family
[    1.877309] Segment Routing with IPv6
[    1.877885] In-situ OAM (IOAM) with IPv6
[    1.878745] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.881368] NET: Registered PF_PACKET protocol family
[    1.882340] Bridge firewalling registered
[    1.883484] l2tp_core: L2TP core driver, V2.0
[    1.884055] Key type dns_resolver registered
[    1.891551] NET: Registered PF_VSOCK protocol family
[    1.911790] registered taskstats version 1
[    1.925412] Key type .fscrypt registered
[    1.930305] Key type fscrypt-provisioning registered
[    1.950117] Btrfs loaded, zoned=no, fsverity=no
[    1.962751] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.977525] Key type encrypted registered
[    1.984835] printk: legacy console [netcon0] enabled
[    1.987669] netconsole: network logging started
[    2.141677] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.418963] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    2.428783] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    2.613608] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.682008] IP-Config: Complete:
[    2.688918]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    2.703091]      host=192.168.7.2, domain=, nis-domain=(none)
[    2.718211]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.718347]      nameserver0=8.8.8.8
[    2.746418] clk: Disabling unused clocks
[    2.757752] md: Waiting for all devices to be available before autodetect
[    2.763004] md: If you don't use raid, use raid=noautodetect
[    2.768058] md: Autodetecting RAID arrays.
[    2.773215] md: autorun ...
[    2.775897] md: ... autorun DONE.
[    2.815572] EXT4-fs (vda): mounted filesystem 51546b3c-608a-456b-9709-9e4e4fdeb45e r/w with ordered data mode. Quota mode: disabled.
[    2.821474] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.826026] devtmpfs: mounted
[    2.879368] Freeing unused kernel image (initmem) memory: 424K
[    2.884891] This architecture does not have kernel memory protection.
[    2.890193] Run /sbin/init as init process
[    2.913556] process '/sbin/init.sysvinit' started with executable stack
[    4.378235] udevd[102]: starting version 3.2.14
[    4.437824] udevd[103]: starting eudev-3.2.14
[    8.581957] EXT4-fs (vda): re-mounted 51546b3c-608a-456b-9709-9e4e4fdeb45e r/w. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error

Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.10.14-yocto-standard #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024 mips
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
dropbear.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 22 01:13:03 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
pci id for fd 10: 1234:1111, driver (null)
MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemumips /dev/ttyS0

qemumips login: 