[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945368085 ns
[    0.000146] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421761532ns
[    0.006639] Console: colour dummy device 80x25
[    0.007306] printk: legacy console [tty0] enabled
[    0.007947] printk: legacy bootconsole [uart8250] disabled
[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945368085 ns
[    0.000146] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421761532ns
[    0.006639] Console: colour dummy device 80x25
[    0.007306] printk: legacy console [tty0] enabled
[    0.007947] printk: legacy bootconsole [uart8250] disabled
[    0.011900] Calibrating delay loop... 1882.52 BogoMIPS (lpj=9412608)
[    0.070904] pid_max: default: 32768 minimum: 301
[    0.071910] LSM: initializing lsm=capability,landlock
[    0.072341] landlock: Up and running.
[    0.074508] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.074606] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.100682] Performance counters: No available PMU.
[    0.101722] rcu: Hierarchical SRCU implementation.
[    0.101768] rcu: 	Max phase no-delay instances is 1000.
[    0.106501] smp: Bringing up secondary CPUs ...
[    0.106662] smp: Brought up 1 node, 1 CPU
[    0.116141] devtmpfs: initialized
[    0.121016] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.122112] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.128126] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.141900] LOGIC PIO: addr 0x00000070 not registered in io_range_list
[    0.493001] raid6: int32x8  gen()   447 MB/s
[    0.786210] raid6: int32x4  gen()   966 MB/s
[    0.954874] raid6: int32x2  gen()  1177 MB/s
[    1.126866] raid6: int32x1  gen()   893 MB/s
[    1.127093] raid6: using algorithm int32x2 gen() 1177 MB/s
[    1.297150] raid6: .... xor() 644 MB/s, rmw enabled
[    1.297276] raid6: using intx1 recovery algorithm
[    1.299538] SCSI subsystem initialized
[    1.299907] usbcore: registered new interface driver usbfs
[    1.300116] usbcore: registered new interface driver hub
[    1.300243] usbcore: registered new device driver usb
[    1.300464] pps_core: LinuxPPS API ver. 1 registered
[    1.300497] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.300596] PTP clock support registered
[    1.312753] PCI host bridge to bus 0000:00
[    1.313010] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.313351] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.313459] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.314531] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 conventional PCI endpoint
[    1.315189] pci 0000:00:00.0: BAR 0 [mem 0x08000000-0x0800000f]
[    1.315293] pci 0000:00:00.0: BAR 1 [io  0x8000000-0x8000003]
[    1.315398] pci 0000:00:00.0: BAR 2: can't handle BAR above 4GB (bus address 0x1f00000010)
[    1.315448] pci 0000:00:00.0: BAR 2 [mem size 0x00000010 64bit pref]
[    1.315598] pci 0000:00:00.0: BAR 4 [mem 0x00e00000-0x00e0000f]
[    1.315646] pci 0000:00:00.0: BAR 5 [mem 0x01000010-0x0100001f 64bit]
[    1.317532] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 conventional PCI endpoint
[    1.318031] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 conventional PCI endpoint
[    1.318137] pci 0000:00:0a.1: BAR 4 [io  0x0000-0x000f]
[    1.318212] pci 0000:00:0a.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    1.318256] pci 0000:00:0a.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    1.318304] pci 0000:00:0a.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    1.318345] pci 0000:00:0a.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    1.318586] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 conventional PCI endpoint
[    1.318693] pci 0000:00:0a.2: BAR 4 [io  0x0000-0x001f]
[    1.319071] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    1.319445] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.319534] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.319864] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    1.319935] pci 0000:00:12.0: BAR 0 [mem 0x00000000-0x00ffffff pref]
[    1.319982] pci 0000:00:12.0: BAR 2 [mem 0x00000000-0x00000fff]
[    1.320040] pci 0000:00:12.0: ROM [mem 0x00000000-0x0000ffff pref]
[    1.320336] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    1.320408] pci 0000:00:13.0: BAR 0 [io  0x0000-0x001f]
[    1.320471] pci 0000:00:13.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.320510] pci 0000:00:13.0: ROM [mem 0x00000000-0x0003ffff pref]
[    1.320742] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.320809] pci 0000:00:14.0: BAR 0 [io  0x0000-0x001f]
[    1.320871] pci 0000:00:14.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.321103] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    1.321168] pci 0000:00:15.0: BAR 0 [io  0x0000-0x007f]
[    1.321231] pci 0000:00:15.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.321695] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.322701] pci 0000:00:12.0: BAR 0 [mem 0x10000000-0x10ffffff pref]: assigned
[    1.322913] pci 0000:00:13.0: ROM [mem 0x11000000-0x1103ffff pref]: assigned
[    1.322982] pci 0000:00:12.0: ROM [mem 0x11040000-0x1104ffff pref]: assigned
[    1.323029] pci 0000:00:13.0: BAR 4 [mem 0x11050000-0x11053fff 64bit pref]: assigned
[    1.323124] pci 0000:00:14.0: BAR 4 [mem 0x11054000-0x11057fff 64bit pref]: assigned
[    1.323180] pci 0000:00:15.0: BAR 4 [mem 0x11058000-0x1105bfff 64bit pref]: assigned
[    1.323247] pci 0000:00:12.0: BAR 2 [mem 0x1105c000-0x1105cfff]: assigned
[    1.323308] pci 0000:00:15.0: BAR 0 [io  0x1080-0x10ff]: assigned
[    1.323351] pci 0000:00:0a.2: BAR 4 [io  0x1040-0x105f]: assigned
[    1.323383] pci 0000:00:13.0: BAR 0 [io  0x1060-0x107f]: assigned
[    1.323420] pci 0000:00:14.0: BAR 0 [io  0x1400-0x141f]: assigned
[    1.323453] pci 0000:00:00.0: BAR 0 [mem 0x1105d000-0x1105d00f]: assigned
[    1.323507] pci 0000:00:00.0: BAR 0: error updating (0x1105d000 != 0x0000d000)
[    1.323567] pci 0000:00:00.0: BAR 2 [mem 0x1105d010-0x1105d01f 64bit pref]: assigned
[    1.323616] pci 0000:00:00.0: BAR 2: error updating (0x1105d01c != 0x0000d01c)
[    1.323662] pci 0000:00:00.0: BAR 4 [mem 0x1105d020-0x1105d02f]: assigned
[    1.323695] pci 0000:00:00.0: BAR 4: error updating (0x1105d020 != 0x0000d020)
[    1.323734] pci 0000:00:00.0: BAR 5 [mem 0x1105d030-0x1105d03f 64bit]: assigned
[    1.323780] pci 0000:00:00.0: BAR 5: error updating (0x1105d034 != 0x0100d034)
[    1.323830] pci 0000:00:0a.1: BAR 4 [io  0x1420-0x142f]: assigned
[    1.323863] pci 0000:00:00.0: BAR 1 [io  0x1430-0x1433]: assigned
[    1.325387] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.325471] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.325536] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.325622] vgaarb: loaded
[    1.327033] clocksource: Switched to clocksource MIPS
[    1.345984] NET: Registered PF_INET protocol family
[    1.346963] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.351945] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.352058] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.352145] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.352288] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.352409] TCP: Hash tables configured (established 2048 bind 2048)
[    1.353346] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.353532] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.354644] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.356470] RPC: Registered named UNIX socket transport module.
[    1.356540] RPC: Registered udp transport module.
[    1.356569] RPC: Registered tcp transport module.
[    1.356596] RPC: Registered tcp-with-tls transport module.
[    1.356686] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.357247] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.357892] PCI: CLS 0 bytes, default 16
[    1.363921] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.366215] NFS: Registering the id_resolver key type
[    1.367311] Key type id_resolver registered
[    1.367368] Key type id_legacy registered
[    1.368581] Key type cifs.idmap registered
[    1.598278] xor: measuring software checksum speed
[    1.600347]    8regs           :  1708 MB/sec
[    1.602424]    8regs_prefetch  :  1614 MB/sec
[    1.604310]    32regs          :  1768 MB/sec
[    1.606440]    32regs_prefetch :  1562 MB/sec
[    1.606490] xor: using function: 32regs (1768 MB/sec)
[    1.606842] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.606983] io scheduler mq-deadline registered
[    1.607049] io scheduler kyber registered
[    1.610640] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.612808] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.613608] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.615099] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.620613] printk: legacy console [ttyS0] disabled
[    1.644509] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.644598] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.645831] printk: legacy console [ttyS0] enabled
[    1.734302] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.734865] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    1.735196] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    1.741358] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    1.742955] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    1.743911] [drm] Found bochs VGA, ID 0xb0c5.
[    1.744247] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    1.747461] [drm] Found EDID data blob.
[    1.752236] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    1.802739] Console: switching to colour frame buffer device 160x50
[    1.811031] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.829077] brd: module loaded
[    1.829821] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    1.834036] virtio_blk virtio2: [vda] 1163472 512-byte logical blocks (596 MB/568 MiB)
[    1.850801] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    1.851972] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    1.853134] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    1.859211] hub 1-0:1.0: USB hub found
[    1.859966] hub 1-0:1.0: 2 ports detected
[    1.864823] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.865757] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.868686] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.870789] usbcore: registered new interface driver usbhid
[    1.871231] usbhid: USB HID core driver
[    1.871888] u32 classifier
[    1.872130]     input device check on
[    1.872408]     Actions configured
[    1.874169] NET: Registered PF_INET6 protocol family
[    1.881501] Segment Routing with IPv6
[    1.882044] In-situ OAM (IOAM) with IPv6
[    1.882944] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.885467] NET: Registered PF_PACKET protocol family
[    1.886374] Bridge firewalling registered
[    1.887614] l2tp_core: L2TP core driver, V2.0
[    1.888129] Key type dns_resolver registered
[    1.894266] NET: Registered PF_VSOCK protocol family
[    1.907709] registered taskstats version 1
[    1.924307] Key type .fscrypt registered
[    1.930809] Key type fscrypt-provisioning registered
[    1.939511] Btrfs loaded, zoned=no, fsverity=no
[    1.957539] Key type encrypted registered
[    1.965194] printk: legacy console [netcon0] enabled
[    1.970179] netconsole: network logging started
[    1.979075] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.137105] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.385196] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    2.389288] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    2.618384] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.677051] IP-Config: Complete:
[    2.682103]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    2.691972]      host=192.168.7.8, domain=, nis-domain=(none)
[    2.701169]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.701284]      nameserver0=8.8.8.8
[    2.719279] clk: Disabling unused clocks
[    2.727537] md: Waiting for all devices to be available before autodetect
[    2.730605] md: If you don't use raid, use raid=noautodetect
[    2.735507] md: Autodetecting RAID arrays.
[    2.740832] md: autorun ...
[    2.747053] md: ... autorun DONE.
[    2.791025] EXT4-fs (vda): mounted filesystem d9422bff-0f12-4cc3-9608-9c90e7406428 r/w with ordered data mode. Quota mode: disabled.
[    2.797467] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.802200] devtmpfs: mounted
[    2.855782] Freeing unused kernel image (initmem) memory: 424K
[    2.861503] This architecture does not have kernel memory protection.
[    2.866827] Run /sbin/init as init process
[    2.888945] process '/sbin/init.sysvinit' started with executable stack
[    4.410472] udevd[102]: starting version 3.2.14
[    4.469975] udevd[103]: starting eudev-3.2.14
[    8.847435] EXT4-fs (vda): re-mounted d9422bff-0f12-4cc3-9608-9c90e7406428 r/w. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
bootlogd: writing to console: Input/output error
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.10.14-yocto-standard #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024 mips
Kernel command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 23 20:51:33 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
pci id for fd 10: 1234:1111, driver (null)
MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemumips /dev/ttyS0

qemumips login: 