[    0.000000] Linux version 5.15.166-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 11.5.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Fri Sep 6 17:42:25 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 15a30001, primary cpu clock
[    0.000001] kvm-clock: using sched offset of 413033899 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000005] tsc: Detected 2495.312 MHz processor
[    0.001405] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.001457] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.004061] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.004210] ACPI: Early table checksum verification disabled
[    0.004213] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.004220] ACPI: RSDT 0x000000001FFE246E 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004225] ACPI: FACP 0x000000001FFE224E 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004230] ACPI: DSDT 0x000000001FFE0040 00220E (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004233] ACPI: FACS 0x000000001FFE0000 000040
[    0.004236] ACPI: APIC 0x000000001FFE2342 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004239] ACPI: HPET 0x000000001FFE23D2 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004242] ACPI: MCFG 0x000000001FFE240A 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004245] ACPI: WAET 0x000000001FFE2446 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.004248] ACPI: Reserving FACP table memory at [mem 0x1ffe224e-0x1ffe2341]
[    0.004249] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe224d]
[    0.004251] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.004252] ACPI: Reserving APIC table memory at [mem 0x1ffe2342-0x1ffe23d1]
[    0.004253] ACPI: Reserving HPET table memory at [mem 0x1ffe23d2-0x1ffe2409]
[    0.004254] ACPI: Reserving MCFG table memory at [mem 0x1ffe240a-0x1ffe2445]
[    0.004255] ACPI: Reserving WAET table memory at [mem 0x1ffe2446-0x1ffe246d]
[    0.004286] Zone ranges:
[    0.004287]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.004289]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.004291]   Normal   empty
[    0.004292] Movable zone start for each node
[    0.004293] Early memory node ranges
[    0.004294]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.004296]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.004297] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.004507] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.004524] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.005575] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.005979] ACPI: PM-Timer IO Port: 0x608
[    0.005986] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.006012] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.006015] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.006017] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.006018] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.006020] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.006021] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.006024] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.006026] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.006028] TSC deadline timer available
[    0.006032] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.006049] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.006051] Booting paravirtualized kernel on KVM
[    0.006052] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.006056] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.006351] percpu: Embedded 54 pages/cpu s182360 r8192 d30632 u524288
[    0.006378] kvm-guest: stealtime: cpu 0, msr 1f41b140
[    0.006381] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.006383] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.006466] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.006489] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.006752] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.007565] Memory: 482184K/523736K available (16394K kernel code, 2129K rwdata, 3632K rodata, 1896K init, 1960K bss, 41292K reserved, 0K cma-reserved)
[    0.007598] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.007612] ftrace: allocating 45598 entries in 179 pages
[    0.029438] ftrace: allocated 179 pages with 5 groups
[    0.029698] rcu: Preemptible hierarchical RCU implementation.
[    0.029700] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.029701] 	All grace periods are expedited (rcu_expedited).
[    0.029702] 	Trampoline variant of Tasks RCU enabled.
[    0.029703] 	Rude variant of Tasks RCU enabled.
[    0.029703] 	Tracing variant of Tasks RCU enabled.
[    0.029704] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.029705] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.033605] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.033829] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.033851] random: crng init done
[    0.039012] Console: colour VGA+ 80x25
[    0.127182] printk: console [ttyS0] enabled
[    0.127760] ACPI: Core revision 20210730
[    0.128411] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.129755] APIC: Switch to symmetric I/O mode setup
[    0.130704] x2apic enabled
[    0.131408] Switched APIC routing to physical x2apic.
[    0.133256] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.134151] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f7ed49df2, max_idle_ns: 440795247253 ns
[    0.135617] Calibrating delay loop (skipped) preset value.. 4990.62 BogoMIPS (lpj=2495312)
[    0.137702] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.138408] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.138618] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.139618] Spectre V2 : Mitigation: Retpolines
[    0.140617] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.141617] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.142617] Speculative Store Bypass: Vulnerable
[    0.143634] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.144617] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.145617] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.146435] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.146617] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.162369] Freeing SMP alternatives memory: 48K
[    0.162618] pid_max: default: 32768 minimum: 301
[    0.163628] LSM: Security Framework initializing
[    0.164226] landlock: Up and running.
[    0.164829] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.165618] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.166808] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.167713] Performance Events: AMD PMU driver.
[    0.168339] ... version:                0
[    0.168620] ... bit width:              48
[    0.169151] ... generic registers:      4
[    0.169619] ... value mask:             0000ffffffffffff
[    0.170314] ... max period:             00007fffffffffff
[    0.170619] ... fixed-purpose events:   0
[    0.171158] ... event mask:             000000000000000f
[    0.171657] signal: max sigframe size: 1776
[    0.172233] rcu: Hierarchical SRCU implementation.
[    0.172790] smp: Bringing up secondary CPUs ...
[    0.173470] x86: Booting SMP configuration:
[    0.173620] .... node  #0, CPUs:      #1
[    0.098846] kvm-clock: cpu 1, msr 15a30041, secondary cpu clock
[    0.186018] kvm-guest: stealtime: cpu 1, msr 1f49b140
[    0.188678]  #2
[    0.098846] kvm-clock: cpu 2, msr 15a30081, secondary cpu clock
[    0.201336] kvm-guest: stealtime: cpu 2, msr 1f51b140
[    0.205722]  #3
[    0.098846] kvm-clock: cpu 3, msr 15a300c1, secondary cpu clock
[    0.217994] kvm-guest: stealtime: cpu 3, msr 1f59b140
[    0.220642] smp: Brought up 1 node, 4 CPUs
[    0.221622] smpboot: Max logical packages: 1
[    0.222325] smpboot: Total of 4 processors activated (19962.49 BogoMIPS)
[    0.223037] devtmpfs: initialized
[    0.223763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.224625] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.225657] pinctrl core: initialized pinctrl subsystem
[    0.226751] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.227729] thermal_sys: Registered thermal governor 'step_wise'
[    0.227731] thermal_sys: Registered thermal governor 'user_space'
[    0.228644] cpuidle: using governor menu
[    0.235757] ACPI: bus type PCI registered
[    0.237770] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.239624] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.241636] PCI: Using configuration type 1 for base access
[    0.243962] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.263619] raid6: sse2x4   gen() 12104 MB/s
[    0.280620] raid6: sse2x4   xor()  7228 MB/s
[    0.297622] raid6: sse2x2   gen() 10551 MB/s
[    0.314620] raid6: sse2x2   xor()  8049 MB/s
[    0.331620] raid6: sse2x1   gen() 12416 MB/s
[    0.348620] raid6: sse2x1   xor()  7499 MB/s
[    0.349191] raid6: using algorithm sse2x1 gen() 12416 MB/s
[    0.349619] raid6: .... xor() 7499 MB/s, rmw enabled
[    0.350271] raid6: using ssse3x2 recovery algorithm
[    0.350676] ACPI: Added _OSI(Module Device)
[    0.351236] ACPI: Added _OSI(Processor Device)
[    0.351619] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.352199] ACPI: Added _OSI(Processor Aggregator Device)
[    0.352620] ACPI: Added _OSI(Linux-Dell-Video)
[    0.353178] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.353625] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.354929] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.356556] ACPI: Interpreter enabled
[    0.356628] ACPI: PM: (supports S0 S3 S5)
[    0.357135] ACPI: Using IOAPIC for interrupt routing
[    0.357635] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.358673] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.360384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.360624] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.361663] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.362485] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.362647] PCI host bridge to bus 0000:00
[    0.363170] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.363620] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.364473] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.364620] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.365555] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.365619] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.366595] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.366675] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.367884] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.369621] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.372539] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.375621] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.377441] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.378189] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.380468] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.382620] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.384444] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.385620] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.389146] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.390620] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.394113] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.394665] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.396163] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.397620] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.399153] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.402621] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.405888] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.408218] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.409328] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.411052] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.412322] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.415777] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.417340] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.417942] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.420265] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.420995] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.421819] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.425866] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.426887] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.428419] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.430427] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.431938] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.432675] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.433490] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.433670] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.434462] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.434669] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.435465] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.435668] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.436422] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.436625] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.437365] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.437625] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.438390] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.438625] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.439418] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.439624] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.440631] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.441393] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.441620] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.442330] vgaarb: loaded
[    0.442672] SCSI subsystem initialized
[    0.443163] ACPI: bus type USB registered
[    0.443631] usbcore: registered new interface driver usbfs
[    0.444626] usbcore: registered new interface driver hub
[    0.445294] usbcore: registered new device driver usb
[    0.445629] pps_core: LinuxPPS API ver. 1 registered
[    0.446275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.446621] PTP clock support registered
[    0.447148] Bluetooth: Core ver 2.22
[    0.447625] NET: Registered PF_BLUETOOTH protocol family
[    0.448503] Bluetooth: HCI device and connection manager initialized
[    0.448623] Bluetooth: HCI socket layer initialized
[    0.449573] Bluetooth: L2CAP socket layer initialized
[    0.449624] Bluetooth: SCO socket layer initialized
[    0.450629] PCI: Using ACPI for IRQ routing
[    0.502367] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.502619] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.505665] clocksource: Switched to clocksource kvm-clock
[    0.511861] pnp: PnP ACPI init
[    0.512415] system 00:07: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.513521] pnp: PnP ACPI: found 8 devices
[    0.521576] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.522762] NET: Registered PF_INET protocol family
[    0.523418] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.524582] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.525705] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.526727] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.527737] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.528672] TCP: Hash tables configured (established 4096 bind 4096)
[    0.529517] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.530376] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.531281] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.532314] RPC: Registered named UNIX socket transport module.
[    0.533075] RPC: Registered udp transport module.
[    0.533661] RPC: Registered tcp transport module.
[    0.534277] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.535082] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.535859] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.536630] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.537493] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.538356] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.539220] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.540280] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.541442] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.542545] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.543635] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.545596] PCI: CLS 0 bytes, default 64
[    0.546154] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7ed49df2, max_idle_ns: 440795247253 ns
[    0.634140] Initialise system trusted keyrings
[    0.634887] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.636672] NFS: Registering the id_resolver key type
[    0.638387] Key type id_resolver registered
[    0.638938] Key type id_legacy registered
[    0.639955] Key type cifs.idmap registered
[    0.643820] xor: automatically using best checksumming function   avx       
[    0.644718] Key type asymmetric registered
[    0.645237] Asymmetric key parser 'x509' registered
[    0.645852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.646782] io scheduler mq-deadline registered
[    0.647352] io scheduler kyber registered
[    0.648096] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.650911] ACPI: button: Power Button [PWRF]
[    0.653108] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.656777] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.660101] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.662822] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.665447] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.667066] 00:03: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.669121] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.670292] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.672072] Linux agpgart interface v0.103
[    0.672858] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.673547] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.676390] Console: switching to colour dummy device 80x25
[    0.677232] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.678529] [drm] number of scanouts: 1
[    0.679032] [drm] number of cap sets: 0
[    0.680342] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.684291] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.708391] Console: switching to colour frame buffer device 128x48
[    0.723707] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.727451] brd: module loaded
[    0.729343] loop: module loaded
[    0.731478] virtio_blk virtio3: [vda] 906974 512-byte logical blocks (464 MB/443 MiB)
[    0.735236] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.736483] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.738052] scsi host0: ahci
[    0.738675] scsi host1: ahci
[    0.739318] scsi host2: ahci
[    0.739948] scsi host3: ahci
[    0.740574] scsi host4: ahci
[    0.741186] scsi host5: ahci
[    0.741610] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.742647] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.743687] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.744715] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.745746] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.746780] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.749004] e100: Intel(R) PRO/100 Network Driver
[    0.749760] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.750528] e1000: Intel(R) PRO/1000 Network Driver
[    0.751163] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.751916] e1000e: Intel(R) PRO/1000 Network Driver
[    0.752569] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.753340] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.754050] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.754797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.755644] ehci-pci: EHCI PCI platform driver
[    0.756630] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.757328] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.758435] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.765883] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.766952] hub 1-0:1.0: USB hub found
[    0.767463] hub 1-0:1.0: 6 ports detected
[    0.768151] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.769018] ohci-pci: OHCI PCI platform driver
[    0.769627] uhci_hcd: USB Universal Host Controller Interface driver
[    0.771163] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.772283] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.773973] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c100
[    0.775436] hub 2-0:1.0: USB hub found
[    0.776246] hub 2-0:1.0: 2 ports detected
[    0.778100] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.778939] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.780104] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c120
[    0.781051] hub 3-0:1.0: USB hub found
[    0.781577] hub 3-0:1.0: 2 ports detected
[    0.782557] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.783307] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.784555] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c140
[    0.785570] hub 4-0:1.0: USB hub found
[    0.786112] hub 4-0:1.0: 2 ports detected
[    0.786818] usbcore: registered new interface driver usb-storage
[    0.787692] usbcore: registered new interface driver usbserial_generic
[    0.788608] usbserial: USB Serial support registered for generic
[    0.789595] usbcore: registered new interface driver ftdi_sio
[    0.790380] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.791342] usbcore: registered new interface driver pl2303
[    0.792075] usbserial: USB Serial support registered for pl2303
[    0.792868] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.794610] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.795290] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.796062] mousedev: PS/2 mouse device common for all mice
[    0.797149] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.798025] rtc_cmos 00:06: RTC can wake from S4
[    0.800789] rtc_cmos 00:06: registered as rtc0
[    0.802859] rtc_cmos 00:06: setting system clock to 2024-10-24T15:26:54 UTC (1729783614)
[    0.805098] rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.807128] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.808311] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.809391] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.811253] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.813288] sdhci: Secure Digital Host Controller Interface driver
[    0.814553] sdhci: Copyright(c) Pierre Ossman
[    0.815560] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.817007] usbcore: registered new interface driver usbhid
[    0.818303] usbhid: USB HID core driver
[    0.819294] u32 classifier
[    0.820011]     input device check on
[    0.820931]     Actions configured
[    0.822000] NET: Registered PF_INET6 protocol family
[    0.823834] Segment Routing with IPv6
[    0.824938] In-situ OAM (IOAM) with IPv6
[    0.826204] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.827608] NET: Registered PF_PACKET protocol family
[    0.828650] Bridge firewalling registered
[    0.829478] Key type dns_resolver registered
[    0.830449] NET: Registered PF_VSOCK protocol family
[    0.831942] IPI shorthand broadcast: enabled
[    0.833018] sched_clock: Marking stable (735143998, 97846633)->(892641171, -59650540)
[    0.835362] Loading compiled-in X.509 certificates
[    0.836282] Key type .fscrypt registered
[    0.836797] Key type fscrypt-provisioning registered
[    0.837651] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.839058] Key type encrypted registered
[    0.839662] printk: console [netcon0] enabled
[    0.840231] netconsole: network logging started
[    1.009872] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.060311] ata1: SATA link down (SStatus 0 SControl 300)
[    1.062143] ata4: SATA link down (SStatus 0 SControl 300)
[    1.063533] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.065670] ata6: SATA link down (SStatus 0 SControl 300)
[    1.067165] ata2: SATA link down (SStatus 0 SControl 300)
[    1.068871] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.070577] ata3.00: applying bridge limits
[    1.071566] ata5: SATA link down (SStatus 0 SControl 300)
[    1.073359] ata3.00: configured for UDMA/100
[    1.074549] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.094268] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.096306] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.147126] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[    1.150662] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.429573] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    1.444925] IP-Config: Complete:
[    1.445954]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.448791]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.450521]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.450525]      nameserver0=8.8.8.8
[    1.452913] clk: Disabling unused clocks
[    1.454106] md: Waiting for all devices to be available before autodetect
[    1.455498] md: If you don't use raid, use raid=noautodetect
[    1.456670] md: Autodetecting RAID arrays.
[    1.457471] md: autorun ...
[    1.458069] md: ... autorun DONE.
[    1.460582] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    1.463434] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.472108] devtmpfs: mounted
[    1.474965] Freeing unused kernel image (initmem) memory: 1896K
[    1.476667] Write protecting the kernel read-only data: 22528k
[    1.479084] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.481227] Freeing unused kernel image (rodata/data gap) memory: 464K
[    1.483026] Run /sbin/init as init process
INIT: version 3.01 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.532695] udevd[167]: starting version 3.2.10
[    1.538834] udevd[168]: starting eudev-3.2.10
[    1.687228] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.15.166-yocto-standard #1 SMP PREEMPT Fri Sep 6 17:42:25 UTC 2024 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 24 15:26:55 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCzR6L8GuXFcN6io9JQB2PU+q1GxeukMwtGIdWNYBtiTv72fOYKlXPicTRLEBgYTWgyPAhmj9ymFz7vmCHQ27AUnIMJTT0RugRdhxtESbdsEQzB5jW7X0rhO4jtNcxWu+sopKwcZrx3cLaWqWJpPnn6l0vFm2G9n1mJ3SQcl3kQ9XD6K0rO9Q6PgkmY1haWxYfK1ksaD1P7WgtIV2AKs2HqzgnTpnhGt3K2d45MZCTbBqF1wWRE3R2daZqOdHFlfiZWrKAAXGERiNFmq6byEbWgZhJ6HrlS9so4632vYXxMBsidJikXok2cjNxsEROZtsz7VUBiUIl43QtI9cRbVqsR root@qemux86-64
Fingerprint: sha1!! 7b:bd:34:8f:f9:ec:fc:dd:bd:1d:c4:89:81:99:b7:1f:86:b4:43:71
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.079230] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.080371] Bluetooth: BNEP filters: protocol multicast
[    2.081495] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon
D-BUS per-session daemon address is: unix:path=/tmp/dbus-GWmaJ3q26I,guid=c9871d0fb356a5ce80ae82d1671a673f
Using calibration data stored in /etc/pointercal.xinput

Poky (Yocto Project Reference Distro) 4.0.22 qemux86-64 /dev/ttyS0

qemux86-64 login: Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
failed to create dri screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[658]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=654 comm="matchbox-desktop")
dbus-daemon[658]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
matchbox-wm: X error warning (0xc00003): BadWindow (invalid Window parameter) (opcode: 12)

(connman-applet:625): Gdk-[1;35mCRITICAL[0m **: [34m15:26:55.350[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
