[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945443265 ns
[    0.002153] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421846524ns
[    0.156469] Console: colour dummy device 80x25
[    0.167261] printk: legacy console [tty0] enabled
[    0.178183] printk: legacy bootconsole [uart8250] disabled
[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945443265 ns
[    0.002153] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421846524ns
[    0.156469] Console: colour dummy device 80x25
[    0.167261] printk: legacy console [tty0] enabled
[    0.178183] printk: legacy bootconsole [uart8250] disabled
[    0.208785] Calibrating delay loop... 161.17 BogoMIPS (lpj=805888)
[    0.288881] pid_max: default: 32768 minimum: 301
[    0.302964] LSM: initializing lsm=capability,landlock
[    0.309315] landlock: Up and running.
[    0.339637] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.341121] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.744519] Performance counters: No available PMU.
[    0.761143] rcu: Hierarchical SRCU implementation.
[    0.761921] rcu: 	Max phase no-delay instances is 1000.
[    0.859777] smp: Bringing up secondary CPUs ...
[    0.862201] smp: Brought up 1 node, 1 CPU
[    1.003062] devtmpfs: initialized
[    1.083770] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    1.086352] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    1.189903] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    1.406575] LOGIC PIO: addr 0x00000070 not registered in io_range_list
[    1.989748] raid6: int32x8  gen()    26 MB/s
[    2.376552] raid6: int32x4  gen()    18 MB/s
[    2.775179] raid6: int32x2  gen()    24 MB/s
[    3.604419] raid6: int32x1  gen()    37 MB/s
[    3.609463] raid6: using algorithm int32x1 gen() 37 MB/s
[    4.387723] raid6: .... xor() 27 MB/s, rmw enabled
[    4.391101] raid6: using intx1 recovery algorithm
[    4.519199] SCSI subsystem initialized
[    4.603589] usbcore: registered new interface driver usbfs
[    4.612283] usbcore: registered new interface driver hub
[    4.617667] usbcore: registered new device driver usb
[    4.628759] pps_core: LinuxPPS API ver. 1 registered
[    4.630422] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.635166] PTP clock support registered
[    5.793713] PCI host bridge to bus 0000:00
[    5.804500] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    5.820431] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    5.825854] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    5.876874] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 conventional PCI endpoint
[    5.953506] pci 0000:00:00.0: BAR 0 [mem 0x08000000-0x0800000f]
[    5.958831] pci 0000:00:00.0: BAR 1 [io  0x8000000-0x8000003]
[    5.964175] pci 0000:00:00.0: BAR 2: can't handle BAR above 4GB (bus address 0x1f00000010)
[    5.988887] pci 0000:00:00.0: BAR 2 [mem size 0x00000010 64bit pref]
[    5.996132] pci 0000:00:00.0: BAR 4 [mem 0x00e00000-0x00e0000f]
[    5.998781] pci 0000:00:00.0: BAR 5 [mem 0x01000010-0x0100001f 64bit]
[    6.140559] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 conventional PCI endpoint
[    6.149226] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 conventional PCI endpoint
[    6.151022] pci 0000:00:0a.1: BAR 4 [io  0x0000-0x000f]
[    6.152331] pci 0000:00:0a.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    6.153092] pci 0000:00:0a.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    6.153887] pci 0000:00:0a.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    6.154591] pci 0000:00:0a.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    6.180078] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 conventional PCI endpoint
[    6.182132] pci 0000:00:0a.2: BAR 4 [io  0x0000-0x001f]
[    6.188326] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    6.194315] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    6.195807] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    6.222512] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    6.223798] pci 0000:00:12.0: BAR 0 [mem 0x00000000-0x00ffffff pref]
[    6.224646] pci 0000:00:12.0: BAR 2 [mem 0x00000000-0x00000fff]
[    6.225670] pci 0000:00:12.0: ROM [mem 0x00000000-0x0000ffff pref]
[    6.230739] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    6.232028] pci 0000:00:13.0: BAR 0 [io  0x0000-0x001f]
[    6.233183] pci 0000:00:13.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    6.233852] pci 0000:00:13.0: ROM [mem 0x00000000-0x0003ffff pref]
[    6.238172] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    6.239361] pci 0000:00:14.0: BAR 0 [io  0x0000-0x001f]
[    6.240619] pci 0000:00:14.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    6.266499] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    6.267735] pci 0000:00:15.0: BAR 0 [io  0x0000-0x007f]
[    6.268872] pci 0000:00:15.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    6.278048] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    6.315729] pci 0000:00:12.0: BAR 0 [mem 0x10000000-0x10ffffff pref]: assigned
[    6.322818] pci 0000:00:13.0: ROM [mem 0x11000000-0x1103ffff pref]: assigned
[    6.344830] pci 0000:00:12.0: ROM [mem 0x11040000-0x1104ffff pref]: assigned
[    6.345713] pci 0000:00:13.0: BAR 4 [mem 0x11050000-0x11053fff 64bit pref]: assigned
[    6.347195] pci 0000:00:14.0: BAR 4 [mem 0x11054000-0x11057fff 64bit pref]: assigned
[    6.348067] pci 0000:00:15.0: BAR 4 [mem 0x11058000-0x1105bfff 64bit pref]: assigned
[    6.349117] pci 0000:00:12.0: BAR 2 [mem 0x1105c000-0x1105cfff]: assigned
[    6.350047] pci 0000:00:15.0: BAR 0 [io  0x1080-0x10ff]: assigned
[    6.350686] pci 0000:00:0a.2: BAR 4 [io  0x1040-0x105f]: assigned
[    6.351300] pci 0000:00:13.0: BAR 0 [io  0x1060-0x107f]: assigned
[    6.351950] pci 0000:00:14.0: BAR 0 [io  0x1400-0x141f]: assigned
[    6.352439] pci 0000:00:00.0: BAR 0 [mem 0x1105d000-0x1105d00f]: assigned
[    6.353256] pci 0000:00:00.0: BAR 0: error updating (0x1105d000 != 0x0000d000)
[    6.354181] pci 0000:00:00.0: BAR 2 [mem 0x1105d010-0x1105d01f 64bit pref]: assigned
[    6.354939] pci 0000:00:00.0: BAR 2: error updating (0x1105d01c != 0x0000d01c)
[    6.355620] pci 0000:00:00.0: BAR 4 [mem 0x1105d020-0x1105d02f]: assigned
[    6.356146] pci 0000:00:00.0: BAR 4: error updating (0x1105d020 != 0x0000d020)
[    6.356738] pci 0000:00:00.0: BAR 5 [mem 0x1105d030-0x1105d03f 64bit]: assigned
[    6.357480] pci 0000:00:00.0: BAR 5: error updating (0x1105d034 != 0x0100d034)
[    6.358271] pci 0000:00:0a.1: BAR 4 [io  0x1420-0x142f]: assigned
[    6.358765] pci 0000:00:00.0: BAR 1 [io  0x1430-0x1433]: assigned
[    6.400624] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    6.401482] pci 0000:00:12.0: vgaarb: bridge control possible
[    6.402128] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    6.403010] vgaarb: loaded
[    6.442948] clocksource: Switched to clocksource MIPS
[   18.699379] NET: Registered PF_INET protocol family
[   18.712354] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[   18.788851] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[   18.791535] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[   18.792876] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[   18.795124] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[   18.796939] TCP: Hash tables configured (established 2048 bind 2048)
[   18.811932] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[   18.814794] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[   18.832411] NET: Registered PF_UNIX/PF_LOCAL protocol family
[   18.855901] RPC: Registered named UNIX socket transport module.
[   18.856952] RPC: Registered udp transport module.
[   18.861382] RPC: Registered tcp transport module.
[   18.861904] RPC: Registered tcp-with-tls transport module.
[   18.862374] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   18.870521] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[   18.880002] pci 0000:00:0a.2: quirk_usb_early_handoff+0x0/0xa10 took 13703 usecs
[   18.884347] PCI: CLS 0 bytes, default 16
[   18.960566] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[   18.999402] NFS: Registering the id_resolver key type
[   19.008803] Key type id_resolver registered
[   19.009370] Key type id_legacy registered
[   19.022656] Key type cifs.idmap registered
[   21.826482] xor: measuring software checksum speed
[   21.857280]    8regs           :   113 MB/sec
[   21.888903]    8regs_prefetch  :   107 MB/sec
[   21.917800]    32regs          :   115 MB/sec
[   21.944095]    32regs_prefetch :   127 MB/sec
[   21.944780] xor: using function: 32regs_prefetch (127 MB/sec)
[   21.946942] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[   21.948640] io scheduler mq-deadline registered
[   21.949328] io scheduler kyber registered
[   21.986376] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[   22.010766] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[   22.019204] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[   22.035518] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   22.123827] printk: legacy console [ttyS0] disabled
[   22.199593] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   22.201065] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[   22.221674] printk: legacy console [ttyS0] enabled
[   23.375264] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   23.385718] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[   23.390412] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[   23.482277] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[   23.518177] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[   23.532689] [drm] Found bochs VGA, ID 0xb0c5.
[   23.538398] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[   23.593081] [drm] Found EDID data blob.
[   23.676742] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[   25.094326] Console: switching to colour frame buffer device 160x50
[   25.283541] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[   25.909834] brd: module loaded
[   25.933926] virtio_blk virtio2: 1/0/0 default/read/poll queues
[   26.012209] virtio_blk virtio2: [vda] 1162682 512-byte logical blocks (595 MB/568 MiB)
[   27.450303] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[   27.502483] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[   27.593887] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[   28.570151] hub 1-0:1.0: USB hub found
[   28.611827] hub 1-0:1.0: 2 ports detected
[   29.070960] serio: i8042 KBD port at 0x60,0x64 irq 1
[   29.137113] serio: i8042 AUX port at 0x60,0x64 irq 12
[   29.250386] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[   29.410730] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[   29.530529] usbcore: registered new interface driver usbhid
[   29.605010] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[   29.656479] usbhid: USB HID core driver
[   29.691864] u32 classifier
[   29.695723]     input device check on
[   29.756763]     Actions configured
[   29.815955] NET: Registered PF_INET6 protocol family
[   30.273175] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[   30.361561] Segment Routing with IPv6
[   30.379458] In-situ OAM (IOAM) with IPv6
[   30.452126] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[   30.500249] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   31.173236] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[   32.192854] NET: Registered PF_PACKET protocol family
[   32.578988] Bridge firewalling registered
[   34.191953] l2tp_core: L2TP core driver, V2.0
[   34.316308] Key type dns_resolver registered
[   34.477814] NET: Registered PF_VSOCK protocol family
[   34.904447] registered taskstats version 1
[   35.118126] Key type .fscrypt registered
[   35.223100] Key type fscrypt-provisioning registered
[   35.500229] Btrfs loaded, zoned=no, fsverity=no
[   36.657023] Key type encrypted registered
[   37.294423] printk: legacy console [netcon0] enabled
[   37.692912] netconsole: network logging started
[   38.063427] IP-Config: Complete:
[   38.158546]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[   38.270020]      host=192.168.7.4, domain=, nis-domain=(none)
[   38.408226]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[   38.409013]      nameserver0=8.8.8.8
[   38.730223] clk: Disabling unused clocks
[   39.266701] md: Waiting for all devices to be available before autodetect
[   41.600856] md: If you don't use raid, use raid=noautodetect
[   41.768608] md: Autodetecting RAID arrays.
[   41.893413] md: autorun ...
[   42.023687] md: ... autorun DONE.
[   44.242810] EXT4-fs (vda): mounted filesystem dbcbb331-4d54-48a1-b638-aebc7761895a r/w with ordered data mode. Quota mode: disabled.
[   44.622751] VFS: Mounted root (ext4 filesystem) on device 253:0.
[   45.398523] devtmpfs: mounted
[   46.081225] Freeing unused kernel image (initmem) memory: 424K
[   46.304192] This architecture does not have kernel memory protection.
[   46.442824] Run /sbin/init as init process
[   47.061798] process '/sbin/init.sysvinit' started with executable stack
[   91.419216] udevd[103]: starting version 3.2.14
[   92.680732] udevd[104]: starting eudev-3.2.14
[  161.980840] udevd[104]: worker [113] /devices/pci0000:00/0000:00:15.0/virtio2/block/vda is taking a long time
[  174.810765] udevd[104]: worker [118] /devices/virtual/block/ram11 is taking a long time
[  174.901203] udevd[104]: worker [111] /devices/virtual/block/ram0 is taking a long time
[  175.029181] udevd[104]: worker [115] /devices/virtual/block/ram1 is taking a long time
[  175.099126] udevd[104]: worker [117] /devices/virtual/block/ram10 is taking a long time
[  175.300229] udevd[104]: worker [108] /devices/virtual/block/ram12 is taking a long time
[  178.893368] udevd[104]: worker [110] /devices/virtual/block/ram13 is taking a long time
[  186.792530] udevd[104]: worker [114] /devices/virtual/block/ram14 is taking a long time
[  186.852340] udevd[104]: worker [109] /devices/virtual/block/ram15 is taking a long time
[  205.783262] udevd[104]: worker [112] /devices/virtual/block/ram2 is taking a long time
[  224.231512] hrtimer: interrupt took 273988220 ns
[  243.646355] udevd[104]: worker [117] /devices/virtual/block/ram3 is taking a long time
[  257.099627] udevd[104]: worker [111] /devices/virtual/block/ram4 is taking a long time
[  257.106773] udevd[104]: worker [115] /devices/virtual/block/ram5 is taking a long time
[  260.248984] udevd[104]: worker [114] /devices/virtual/block/ram6 is taking a long time
[  260.359626] udevd[104]: worker [109] /devices/virtual/block/ram7 is taking a long time
[  262.883104] udevd[104]: worker [108] /devices/virtual/block/ram8 is taking a long time
[  280.313047] udevd[113]: timeout '/etc/udev/scripts/mount.sh'
[  283.605001] udevd[113]: slow: '/etc/udev/scripts/mount.sh' [122]
[  285.013937] udevd[113]: timeout: killing '/etc/udev/scripts/mount.sh' [122]
[  285.491698] udevd[113]: slow: '/etc/udev/scripts/mount.sh' [122]
[  286.160371] udevd[113]: '/etc/udev/scripts/mount.sh' [122] terminated by signal 9 (Killed)
[  319.135393] EXT4-fs (vda): re-mounted dbcbb331-4d54-48a1-b638-aebc7761895a r/w. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
bootlogd: writing to console: Input/output error
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.

X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.10.14-yocto-standard #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024 mips
Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Nov  1 17:40:46 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
pci id for fd 10: 1234:1111, driver (null)
MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemumips /dev/ttyS0

qemumips login: 