[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945274465 ns
[    0.000143] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421657084ns
[    0.006783] Console: colour dummy device 80x25
[    0.007503] printk: legacy console [tty0] enabled
[    0.008194] printk: legacy bootconsole [uart8250] disabled
[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945274465 ns
[    0.000143] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421657084ns
[    0.006783] Console: colour dummy device 80x25
[    0.007503] printk: legacy console [tty0] enabled
[    0.008194] printk: legacy bootconsole [uart8250] disabled
[    0.012245] Calibrating delay loop... 1882.52 BogoMIPS (lpj=9412608)
[    0.071748] pid_max: default: 32768 minimum: 301
[    0.072762] LSM: initializing lsm=capability,landlock
[    0.073201] landlock: Up and running.
[    0.075292] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.075390] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.101480] Performance counters: No available PMU.
[    0.102525] rcu: Hierarchical SRCU implementation.
[    0.102573] rcu: 	Max phase no-delay instances is 1000.
[    0.107308] smp: Bringing up secondary CPUs ...
[    0.107460] smp: Brought up 1 node, 1 CPU
[    0.116820] devtmpfs: initialized
[    0.121626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.121848] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.128661] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.142667] LOGIC PIO: addr 0x00000070 not registered in io_range_list
[    0.495598] raid6: int32x8  gen()   457 MB/s
[    0.794715] raid6: int32x4  gen()   976 MB/s
[    0.959186] raid6: int32x2  gen()  1189 MB/s
[    1.131856] raid6: int32x1  gen()   959 MB/s
[    1.132076] raid6: using algorithm int32x2 gen() 1189 MB/s
[    1.302749] raid6: .... xor() 710 MB/s, rmw enabled
[    1.302868] raid6: using intx1 recovery algorithm
[    1.305045] SCSI subsystem initialized
[    1.305413] usbcore: registered new interface driver usbfs
[    1.305632] usbcore: registered new interface driver hub
[    1.305775] usbcore: registered new device driver usb
[    1.306001] pps_core: LinuxPPS API ver. 1 registered
[    1.306034] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.306131] PTP clock support registered
[    1.318325] PCI host bridge to bus 0000:00
[    1.318578] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.318924] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.319033] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.320095] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 conventional PCI endpoint
[    1.320757] pci 0000:00:00.0: BAR 0 [mem 0x08000000-0x0800000f]
[    1.320860] pci 0000:00:00.0: BAR 1 [io  0x8000000-0x8000003]
[    1.320965] pci 0000:00:00.0: BAR 2: can't handle BAR above 4GB (bus address 0x1f00000010)
[    1.321016] pci 0000:00:00.0: BAR 2 [mem size 0x00000010 64bit pref]
[    1.321168] pci 0000:00:00.0: BAR 4 [mem 0x00e00000-0x00e0000f]
[    1.321218] pci 0000:00:00.0: BAR 5 [mem 0x01000010-0x0100001f 64bit]
[    1.323138] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 conventional PCI endpoint
[    1.323638] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 conventional PCI endpoint
[    1.323749] pci 0000:00:0a.1: BAR 4 [io  0x0000-0x000f]
[    1.323824] pci 0000:00:0a.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    1.323866] pci 0000:00:0a.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    1.323918] pci 0000:00:0a.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    1.323958] pci 0000:00:0a.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    1.324202] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 conventional PCI endpoint
[    1.324310] pci 0000:00:0a.2: BAR 4 [io  0x0000-0x001f]
[    1.324685] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    1.325058] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.325152] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.325481] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    1.325551] pci 0000:00:12.0: BAR 0 [mem 0x00000000-0x00ffffff pref]
[    1.325599] pci 0000:00:12.0: BAR 2 [mem 0x00000000-0x00000fff]
[    1.325665] pci 0000:00:12.0: ROM [mem 0x00000000-0x0000ffff pref]
[    1.325959] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    1.326031] pci 0000:00:13.0: BAR 0 [io  0x0000-0x001f]
[    1.326096] pci 0000:00:13.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.326136] pci 0000:00:13.0: ROM [mem 0x00000000-0x0003ffff pref]
[    1.326372] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.326439] pci 0000:00:14.0: BAR 0 [io  0x0000-0x001f]
[    1.326504] pci 0000:00:14.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.326749] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    1.326820] pci 0000:00:15.0: BAR 0 [io  0x0000-0x007f]
[    1.326887] pci 0000:00:15.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.327370] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.328371] pci 0000:00:12.0: BAR 0 [mem 0x10000000-0x10ffffff pref]: assigned
[    1.328585] pci 0000:00:13.0: ROM [mem 0x11000000-0x1103ffff pref]: assigned
[    1.328661] pci 0000:00:12.0: ROM [mem 0x11040000-0x1104ffff pref]: assigned
[    1.328710] pci 0000:00:13.0: BAR 4 [mem 0x11050000-0x11053fff 64bit pref]: assigned
[    1.328802] pci 0000:00:14.0: BAR 4 [mem 0x11054000-0x11057fff 64bit pref]: assigned
[    1.328860] pci 0000:00:15.0: BAR 4 [mem 0x11058000-0x1105bfff 64bit pref]: assigned
[    1.328927] pci 0000:00:12.0: BAR 2 [mem 0x1105c000-0x1105cfff]: assigned
[    1.328987] pci 0000:00:15.0: BAR 0 [io  0x1080-0x10ff]: assigned
[    1.329029] pci 0000:00:0a.2: BAR 4 [io  0x1040-0x105f]: assigned
[    1.329062] pci 0000:00:13.0: BAR 0 [io  0x1060-0x107f]: assigned
[    1.329099] pci 0000:00:14.0: BAR 0 [io  0x1400-0x141f]: assigned
[    1.329132] pci 0000:00:00.0: BAR 0 [mem 0x1105d000-0x1105d00f]: assigned
[    1.329186] pci 0000:00:00.0: BAR 0: error updating (0x1105d000 != 0x0000d000)
[    1.329247] pci 0000:00:00.0: BAR 2 [mem 0x1105d010-0x1105d01f 64bit pref]: assigned
[    1.329296] pci 0000:00:00.0: BAR 2: error updating (0x1105d01c != 0x0000d01c)
[    1.329342] pci 0000:00:00.0: BAR 4 [mem 0x1105d020-0x1105d02f]: assigned
[    1.329375] pci 0000:00:00.0: BAR 4: error updating (0x1105d020 != 0x0000d020)
[    1.329415] pci 0000:00:00.0: BAR 5 [mem 0x1105d030-0x1105d03f 64bit]: assigned
[    1.329462] pci 0000:00:00.0: BAR 5: error updating (0x1105d034 != 0x0100d034)
[    1.329512] pci 0000:00:0a.1: BAR 4 [io  0x1420-0x142f]: assigned
[    1.329545] pci 0000:00:00.0: BAR 1 [io  0x1430-0x1433]: assigned
[    1.331035] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.331119] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.331182] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.331270] vgaarb: loaded
[    1.332693] clocksource: Switched to clocksource MIPS
[    1.351434] NET: Registered PF_INET protocol family
[    1.352291] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.357270] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.357386] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.357468] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.357610] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.357763] TCP: Hash tables configured (established 2048 bind 2048)
[    1.358677] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.358859] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.359952] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.361776] RPC: Registered named UNIX socket transport module.
[    1.361843] RPC: Registered udp transport module.
[    1.361871] RPC: Registered tcp transport module.
[    1.361898] RPC: Registered tcp-with-tls transport module.
[    1.361926] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.362513] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.363174] PCI: CLS 0 bytes, default 16
[    1.369173] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.371368] NFS: Registering the id_resolver key type
[    1.372301] Key type id_resolver registered
[    1.372483] Key type id_legacy registered
[    1.373712] Key type cifs.idmap registered
[    1.604275] xor: measuring software checksum speed
[    1.606335]    8regs           :  1709 MB/sec
[    1.608442]    8regs_prefetch  :  1594 MB/sec
[    1.610349]    32regs          :  1750 MB/sec
[    1.612470]    32regs_prefetch :  1570 MB/sec
[    1.612527] xor: using function: 32regs (1750 MB/sec)
[    1.612833] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.612969] io scheduler mq-deadline registered
[    1.613034] io scheduler kyber registered
[    1.616581] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.618760] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.619576] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.621135] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.626705] printk: legacy console [ttyS0] disabled
[    1.650133] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.650231] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.651460] printk: legacy console [ttyS0] enabled
[    1.748830] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.749444] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    1.749724] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    1.755957] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    1.757626] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    1.758611] [drm] Found bochs VGA, ID 0xb0c5.
[    1.758980] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    1.762202] [drm] Found EDID data blob.
[    1.767125] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    1.805787] Console: switching to colour frame buffer device 160x50
[    1.814412] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    1.848482] brd: module loaded
[    1.849281] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    1.853666] virtio_blk virtio2: [vda] 1162672 512-byte logical blocks (595 MB/568 MiB)
[    1.873452] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    1.874719] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    1.876024] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    1.882136] hub 1-0:1.0: USB hub found
[    1.883075] hub 1-0:1.0: 2 ports detected
[    1.888029] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.889057] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.891901] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    1.894335] usbcore: registered new interface driver usbhid
[    1.894846] usbhid: USB HID core driver
[    1.895533] u32 classifier
[    1.895806]     input device check on
[    1.896118]     Actions configured
[    1.897887] NET: Registered PF_INET6 protocol family
[    1.906117] Segment Routing with IPv6
[    1.906689] In-situ OAM (IOAM) with IPv6
[    1.907645] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.910232] NET: Registered PF_PACKET protocol family
[    1.911182] Bridge firewalling registered
[    1.912383] l2tp_core: L2TP core driver, V2.0
[    1.912937] Key type dns_resolver registered
[    1.920213] NET: Registered PF_VSOCK protocol family
[    1.934142] registered taskstats version 1
[    1.950330] Key type .fscrypt registered
[    1.959043] Key type fscrypt-provisioning registered
[    1.974282] Btrfs loaded, zoned=no, fsverity=no
[    1.987663] Key type encrypted registered
[    1.993997] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.003122] printk: legacy console [netcon0] enabled
[    2.006032] netconsole: network logging started
[    2.162567] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.412124] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    2.416441] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    2.643470] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    2.692694] IP-Config: Complete:
[    2.695733]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    2.699128]      host=192.168.7.2, domain=, nis-domain=(none)
[    2.702079]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.702127]      nameserver0=8.8.8.8
[    2.719473] clk: Disabling unused clocks
[    2.730739] md: Waiting for all devices to be available before autodetect
[    2.736156] md: If you don't use raid, use raid=noautodetect
[    2.741325] md: Autodetecting RAID arrays.
[    2.746497] md: autorun ...
[    2.749297] md: ... autorun DONE.
[    2.783444] EXT4-fs (vda): mounted filesystem ec1ea22b-b8ec-48a1-ac89-59ef466d9f41 r/w with ordered data mode. Quota mode: disabled.
[    2.792625] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.797121] devtmpfs: mounted
[    2.852637] Freeing unused kernel image (initmem) memory: 424K
[    2.855809] This architecture does not have kernel memory protection.
[    2.858990] Run /sbin/init as init process
[    2.883485] process '/sbin/init.sysvinit' started with executable stack
[    4.420521] udevd[102]: starting version 3.2.14
[    4.551048] udevd[103]: starting eudev-3.2.14
[   10.613126] EXT4-fs (vda): re-mounted ec1ea22b-b8ec-48a1-ac89-59ef466d9f41 r/w. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.10.14-yocto-standard #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024 mips
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov  3 01:13:15 2024
dropbear.
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
pci id for fd 10: 1234:1111, driver (null)
MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemumips /dev/ttyS0

qemumips login: 