)
[    0.028810] Console: colour dummy device 80x30
[    0.032879] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[    0.033068] CPU: Testing write buffer coherency: ok
[    0.034487] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.034653] CPU0: Spectre BHB: enabling loop workaround for all CPUs
[    0.034746] pid_max: default: 32768 minimum: 301
[    0.036115] LSM: initializing lsm=capability,landlock
[    0.036648] landlock: Up and running.
[    0.039224] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.039277] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.082124] /cpus/cpu@0 missing clock-frequency property
[    0.082528] /cpus/cpu@1 missing clock-frequency property
[    0.082574] /cpus/cpu@2 missing clock-frequency property
[    0.082617] /cpus/cpu@3 missing clock-frequency property
[    0.082757] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.106381] Setting up static identity map for 0x40200000 - 0x40200060
[    0.110255] rcu: Hierarchical SRCU implementation.
[    0.110302] rcu: 	Max phase no-delay instances is 1000.
[    0.118704] smp: Bringing up secondary CPUs ...
[    0.232290] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.232463] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.242522] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.242599] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.245665] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.245725] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.263628] smp: Brought up 1 node, 4 CPUs
[    0.263776] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[    0.263875] CPU: All CPU(s) started in SVC mode.
[    0.306894] devtmpfs: initialized
[    0.346277] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.368199] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.369028] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.427299] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.451153] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.459250] cpuidle: using governor ladder
[    0.465004] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.465122] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.466987] Serial: AMBA PL011 UART driver
[    0.528299] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.529790] printk: legacy console [ttyAMA0] enabled
[    0.556813] 9040000.pl011: ttyAMA1 at MMIO 0x9040000 (irq = 29, base_baud = 0) is a PL011 rev1
[    0.567482] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.579910] cryptd: max_cpu_qlen set to 1000
[    0.786080] raid6: neonx8   gen()   669 MB/s
[    0.997967] raid6: neonx4   gen()  1968 MB/s
[    1.203956] raid6: neonx2   gen()  2257 MB/s
[    1.427975] raid6: neonx1   gen()  1373 MB/s
[    1.646069] raid6: int32x8  gen()   210 MB/s
[    1.832418] raid6: int32x4  gen()   171 MB/s
[    2.045496] raid6: int32x2  gen()   488 MB/s
[    2.239934] raid6: int32x1  gen()   495 MB/s
[    2.240582] raid6: using algorithm neonx2 gen() 2257 MB/s
[    2.419075] raid6: .... xor() 935 MB/s, rmw enabled
[    2.419705] raid6: using neon recovery algorithm
[    2.426506] SCSI subsystem initialized
[    2.427645] usbcore: registered new interface driver usbfs
[    2.428249] usbcore: registered new interface driver hub
[    2.428580] usbcore: registered new device driver usb
[    2.429394] pps_core: LinuxPPS API ver. 1 registered
[    2.429563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.429888] PTP clock support registered
[    2.446912] vgaarb: loaded
[    2.455773] clocksource: Switched to clocksource arch_sys_counter
[    2.546733] NET: Registered PF_INET protocol family
[    2.548102] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    2.564006] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.564554] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.565234] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    2.565756] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    2.566198] TCP: Hash tables configured (established 4096 bind 4096)
[    2.567254] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.567615] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.568893] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.572398] RPC: Registered named UNIX socket transport module.
[    2.572566] RPC: Registered udp transport module.
[    2.572657] RPC: Registered tcp transport module.
[    2.572738] RPC: Registered tcp-with-tls transport module.
[    2.572831] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.573027] PCI: CLS 0 bytes, default 64
[    2.589073] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    2.599428] NFS: Registering the id_resolver key type
[    2.600929] Key type id_resolver registered
[    2.601232] Key type id_legacy registered
[    2.606073] Key type cifs.idmap registered
[    2.769937] xor: measuring software checksum speed
[    2.773631]    arm4regs        :  1047 MB/sec
[    2.776552]    8regs           :  1294 MB/sec
[    2.779792]    32regs          :  1139 MB/sec
[    2.782193]    neon            :  1568 MB/sec
[    2.782506] xor: using function: neon (1568 MB/sec)
[    2.783025] async_tx: api initialized (async)
[    2.783972] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    2.784561] io scheduler mq-deadline registered
[    2.785653] io scheduler kyber registered
[    2.788968] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    2.789914] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    2.790808] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    2.791883] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    2.793479] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    2.793792] pci_bus 0000:00: root bus resource [bus 00-0f]
[    2.793994] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.794154] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    2.795878] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint
[    2.799615] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    2.800133] pci 0000:00:01.0: BAR 0 [io  0x0000-0x001f]
[    2.800330] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.800520] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.801326] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint
[    2.801575] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.802530] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[    2.802765] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]
[    2.802943] pci 0000:00:03.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    2.804875] PCI: bus0: Fast back to back transfers disabled
[    2.808617] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned
[    2.808959] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned
[    2.809137] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned
[    2.809302] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned
[    2.809426] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned
[    2.809548] pci 0000:00:01.0: BAR 0 [io  0x1000-0x101f]: assigned
[    2.810768] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    2.817707] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    2.821162] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    2.899584] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    2.962227] [drm] features: -virgl +edid -resource_blob -host_visible
[    2.962320] [drm] features: -context_init
[    2.964939] [drm] number of scanouts: 1
[    2.965338] [drm] number of cap sets: 0
[    2.977011] printk: legacy console [hvc0] enabled
[    2.977691] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    3.094774] Console: switching to colour frame buffer device 160x50
[    3.109080] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    3.152806] brd: module loaded
[    3.158824] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    3.162803] virtio_blk virtio1: [vda] 897098 512-byte logical blocks (459 MB/438 MiB)
[    3.180165] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    3.180998] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    3.184496] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    3.188067] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    3.188570] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    3.189206] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    3.200305] hub 1-0:1.0: USB hub found
[    3.201398] hub 1-0:1.0: 4 ports detected
[    3.205761] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.208802] hub 2-0:1.0: USB hub found
[    3.209592] hub 2-0:1.0: 4 ports detected
[    3.218019] rtc-pl031 9010000.pl031: registered as rtc0
[    3.219548] rtc-pl031 9010000.pl031: setting system clock to 2024-11-06T15:01:29 UTC (1730905289)
[    3.224248] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    3.229142] usbcore: registered new interface driver usbhid
[    3.229612] usbhid: USB HID core driver
[    3.230344] u32 classifier
[    3.230652]     input device check on
[    3.231121]     Actions configured
[    3.233559] NET: Registered PF_INET6 protocol family
[    3.241803] Segment Routing with IPv6
[    3.242625] In-situ OAM (IOAM) with IPv6
[    3.243890] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.247419] NET: Registered PF_PACKET protocol family
[    3.248466] Bridge firewalling registered
[    3.249620] l2tp_core: L2TP core driver, V2.0
[    3.250183] Key type dns_resolver registered
[    3.251486] NET: Registered PF_VSOCK protocol family
[    3.253357] Registering SWP/SWPB emulation handler
[    3.279658] registered taskstats version 1
[    3.306008] Key type .fscrypt registered
[    3.306815] Key type fscrypt-provisioning registered
[    3.375565] Btrfs loaded, zoned=no, fsverity=no
[    3.393796] Key type encrypted registered
[    3.395956] printk: legacy console [netcon0] enabled
[    3.396442] netconsole: network logging started
[    3.451633] IP-Config: Complete:
[    3.452267]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    3.453495]      host=192.168.7.4, domain=, nis-domain=(none)
[    3.454147]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.454202]      nameserver0=8.8.8.8
[    3.457740] clk: Disabling unused clocks
[    3.461785] md: Waiting for all devices to be available before autodetect
[    3.462449] md: If you don't use raid, use raid=noautodetect
[    3.463086] md: Autodetecting RAID arrays.
[    3.463534] md: autorun ...
[    3.463915] md: ... autorun DONE.
[    3.515689] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    3.542434] EXT4-fs (vda): mounted filesystem 0d6e95e8-f088-448f-988b-22c32144b921 r/w with ordered data mode. Quota mode: disabled.
[    3.546975] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.550991] devtmpfs: mounted
[    3.709657] Freeing unused kernel image (initmem) memory: 2048K
[    3.856741] Run /sbin/init as init process
[    3.867783] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    3.870698] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    4.015454] usb 1-2: new high-speed USB device number 3 using xhci_hcd
INIT: version 3.04 booting
[    4.220736] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    4.286666] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    5.830773] udevd[136]: starting version 3.2.14
[    5.954372] udevd[137]: starting eudev-3.2.14
[    9.511315] EXT4-fs (vda): re-mounted 0d6e95e8-f088-448f-988b-22c32144b921 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver

Starting Dropbear SSH server: dropbear.
Starting rpcbind daemon...
X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.10.14-yocto-standard #1 SMP PREEMPT Mon Oct 14 13:28:35 UTC 2024 armv7l
Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov  6 15:01:42 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemuarm /dev/hvc0

qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-E8iPDegDaE,guid=e4b5406383917d814ed1623a672b84d8
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[570]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=553 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[570]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(matchbox-desktop:586): Gtk-[1;33mWARNING[0m **: [34m15:01:51.626[0m: Could not load a pixbuf from icon theme.
This may indicate that pixbuf loaders or the mime database could not be found.

** (matchbox-desktop:586): [1;33mWARNING[0m **: [34m15:01:51.629[0m: Error loading icon: Failed to load /usr/share/pixmaps/xinput_calibrator.xpm: Unrecognized image file format
