[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945367265 ns
[    0.000147] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421760508ns
[    0.007886] Console: colour dummy device 80x25
[    0.011071] printk: legacy console [tty0] enabled
[    0.011769] printk: legacy bootconsole [uart8250] disabled
[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1) #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: legacy bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 18 pages/cpu s42144 r8192 d23392 u73728
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
[    0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 65535
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 238312K/262140K available (14919K kernel code, 1522K rwdata, 2900K rodata, 424K init, 413K bss, 23828K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1.
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 320.00 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945367265 ns
[    0.000147] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421760508ns
[    0.007886] Console: colour dummy device 80x25
[    0.011071] printk: legacy console [tty0] enabled
[    0.011769] printk: legacy bootconsole [uart8250] disabled
[    0.013706] Calibrating delay loop... 1849.75 BogoMIPS (lpj=9248768)
[    0.071616] pid_max: default: 32768 minimum: 301
[    0.072697] LSM: initializing lsm=capability,landlock
[    0.073157] landlock: Up and running.
[    0.143758] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.143920] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.172616] Performance counters: No available PMU.
[    0.173455] rcu: Hierarchical SRCU implementation.
[    0.173505] rcu: 	Max phase no-delay instances is 1000.
[    0.178506] smp: Bringing up secondary CPUs ...
[    0.178675] smp: Brought up 1 node, 1 CPU
[    0.189088] devtmpfs: initialized
[    0.194845] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.195032] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.207427] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.222990] LOGIC PIO: addr 0x00000070 not registered in io_range_list
[    0.578425] raid6: int32x8  gen()   441 MB/s
[    0.875384] raid6: int32x4  gen()   951 MB/s
[    1.043455] raid6: int32x2  gen()  1144 MB/s
[    1.217188] raid6: int32x1  gen()   859 MB/s
[    1.217431] raid6: using algorithm int32x2 gen() 1144 MB/s
[    1.387186] raid6: .... xor() 612 MB/s, rmw enabled
[    1.388145] raid6: using intx1 recovery algorithm
[    1.391606] SCSI subsystem initialized
[    1.392034] usbcore: registered new interface driver usbfs
[    1.392257] usbcore: registered new interface driver hub
[    1.392396] usbcore: registered new device driver usb
[    1.392640] pps_core: LinuxPPS API ver. 1 registered
[    1.392675] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.392782] PTP clock support registered
[    1.405789] PCI host bridge to bus 0000:00
[    1.406069] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.406414] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.406532] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.407692] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 conventional PCI endpoint
[    1.408280] pci 0000:00:00.0: [Firmware Bug]: BAR 0: invalid; can't size
[    1.408373] pci 0000:00:00.0: [Firmware Bug]: BAR 1: invalid; can't size
[    1.408460] pci 0000:00:00.0: [Firmware Bug]: BAR 2: invalid; can't size
[    1.408504] pci 0000:00:00.0: [Firmware Bug]: BAR 3: invalid; can't size
[    1.408553] pci 0000:00:00.0: [Firmware Bug]: BAR 4: invalid; can't size
[    1.408602] pci 0000:00:00.0: [Firmware Bug]: BAR 5: invalid; can't size
[    1.410512] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 conventional PCI endpoint
[    1.411034] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 conventional PCI endpoint
[    1.411259] pci 0000:00:0a.1: BAR 4 [io  0x0000-0x000f]
[    1.411347] pci 0000:00:0a.1: BAR 0 [io  0x01f0-0x01f7]: legacy IDE quirk
[    1.411391] pci 0000:00:0a.1: BAR 1 [io  0x03f6]: legacy IDE quirk
[    1.411448] pci 0000:00:0a.1: BAR 2 [io  0x0170-0x0177]: legacy IDE quirk
[    1.411489] pci 0000:00:0a.1: BAR 3 [io  0x0376]: legacy IDE quirk
[    1.411749] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 conventional PCI endpoint
[    1.411867] pci 0000:00:0a.2: BAR 4 [io  0x0000-0x001f]
[    1.412285] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 conventional PCI endpoint
[    1.412677] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.412770] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.413125] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[    1.413199] pci 0000:00:12.0: BAR 0 [mem 0x00000000-0x00ffffff pref]
[    1.413292] pci 0000:00:12.0: BAR 2 [mem 0x00000000-0x00000fff]
[    1.413352] pci 0000:00:12.0: ROM [mem 0x00000000-0x0000ffff pref]
[    1.413658] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    1.413734] pci 0000:00:13.0: BAR 0 [io  0x0000-0x001f]
[    1.413814] pci 0000:00:13.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.413899] pci 0000:00:13.0: ROM [mem 0x00000000-0x0003ffff pref]
[    1.414149] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    1.414220] pci 0000:00:14.0: BAR 0 [io  0x0000-0x001f]
[    1.414285] pci 0000:00:14.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.414521] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    1.414588] pci 0000:00:15.0: BAR 0 [io  0x0000-0x007f]
[    1.414653] pci 0000:00:15.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[    1.415146] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.416184] pci 0000:00:12.0: BAR 0 [mem 0x10000000-0x10ffffff pref]: assigned
[    1.416405] pci 0000:00:13.0: ROM [mem 0x11000000-0x1103ffff pref]: assigned
[    1.416478] pci 0000:00:12.0: ROM [mem 0x11040000-0x1104ffff pref]: assigned
[    1.416528] pci 0000:00:13.0: BAR 4 [mem 0x11050000-0x11053fff 64bit pref]: assigned
[    1.416623] pci 0000:00:14.0: BAR 4 [mem 0x11054000-0x11057fff 64bit pref]: assigned
[    1.416681] pci 0000:00:15.0: BAR 4 [mem 0x11058000-0x1105bfff 64bit pref]: assigned
[    1.416751] pci 0000:00:12.0: BAR 2 [mem 0x1105c000-0x1105cfff]: assigned
[    1.416813] pci 0000:00:15.0: BAR 0 [io  0x1080-0x10ff]: assigned
[    1.416861] pci 0000:00:0a.2: BAR 4 [io  0x1040-0x105f]: assigned
[    1.416926] pci 0000:00:13.0: BAR 0 [io  0x1060-0x107f]: assigned
[    1.416966] pci 0000:00:14.0: BAR 0 [io  0x1400-0x141f]: assigned
[    1.417005] pci 0000:00:0a.1: BAR 4 [io  0x1420-0x142f]: assigned
[    1.418670] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.418759] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.418825] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.418920] vgaarb: loaded
[    1.420422] clocksource: Switched to clocksource MIPS
[    1.477608] NET: Registered PF_INET protocol family
[    1.478546] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.483448] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.483568] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.483652] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.483813] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.483979] TCP: Hash tables configured (established 2048 bind 2048)
[    1.484954] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.485147] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.486311] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.490176] RPC: Registered named UNIX socket transport module.
[    1.490254] RPC: Registered udp transport module.
[    1.490285] RPC: Registered tcp transport module.
[    1.490313] RPC: Registered tcp-with-tls transport module.
[    1.490342] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.490903] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.491595] PCI: CLS 0 bytes, default 16
[    1.497888] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.515141] NFS: Registering the id_resolver key type
[    1.516136] Key type id_resolver registered
[    1.516192] Key type id_legacy registered
[    1.517508] Key type cifs.idmap registered
[    1.752061] xor: measuring software checksum speed
[    1.754572]    8regs           :  1393 MB/sec
[    1.756690]    8regs_prefetch  :  1586 MB/sec
[    1.758654]    32regs          :  1700 MB/sec
[    1.760804]    32regs_prefetch :  1550 MB/sec
[    1.760874] xor: using function: 32regs (1700 MB/sec)
[    1.761197] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    1.761339] io scheduler mq-deadline registered
[    1.761407] io scheduler kyber registered
[    1.765086] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    1.767368] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    1.768231] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    1.770620] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.776241] printk: legacy console [ttyS0] disabled
[    1.800505] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.800605] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    1.801878] printk: legacy console [ttyS0] enabled
[    1.886822] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.887401] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    1.887770] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    1.898794] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    1.900524] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    1.901559] [drm] Found bochs VGA, ID 0xb0c5.
[    1.901912] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    1.905184] [drm] Found EDID data blob.
[    1.910218] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.064954] Console: switching to colour frame buffer device 160x50
[    2.073686] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.107126] brd: module loaded
[    2.107913] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    2.134686] virtio_blk virtio2: [vda] 1162142 512-byte logical blocks (595 MB/567 MiB)
[    2.153466] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    2.154765] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    2.156031] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    2.163331] hub 1-0:1.0: USB hub found
[    2.172480] hub 1-0:1.0: 2 ports detected
[    2.198024] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.199216] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.204705] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    2.207062] usbcore: registered new interface driver usbhid
[    2.207568] usbhid: USB HID core driver
[    2.208303] u32 classifier
[    2.208560]     input device check on
[    2.208877]     Actions configured
[    2.211595] NET: Registered PF_INET6 protocol family
[    2.217603] Segment Routing with IPv6
[    2.218180] In-situ OAM (IOAM) with IPv6
[    2.219161] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.222375] NET: Registered PF_PACKET protocol family
[    2.225910] Bridge firewalling registered
[    2.227113] l2tp_core: L2TP core driver, V2.0
[    2.227582] Key type dns_resolver registered
[    2.248381] NET: Registered PF_VSOCK protocol family
[    2.264553] registered taskstats version 1
[    2.278040] Key type .fscrypt registered
[    2.285778] Key type fscrypt-provisioning registered
[    2.295077] Btrfs loaded, zoned=no, fsverity=no
[    2.324071] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.367439] Key type encrypted registered
[    2.371837] printk: legacy console [netcon0] enabled
[    2.374807] netconsole: network logging started
[    2.450318] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    2.706303] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    2.716721] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    2.961425] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.045228] IP-Config: Complete:
[    3.051022]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    3.057004]      host=192.168.7.4, domain=, nis-domain=(none)
[    3.062647]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.062719]      nameserver0=8.8.8.8
[    3.079631] clk: Disabling unused clocks
[    3.086053] md: Waiting for all devices to be available before autodetect
[    3.089267] md: If you don't use raid, use raid=noautodetect
[    3.094842] md: Autodetecting RAID arrays.
[    3.130006] md: autorun ...
[    3.135779] md: ... autorun DONE.
[    3.195222] EXT4-fs (vda): mounted filesystem bbaaff5c-4d65-4007-8118-18273f80f0b3 r/w with ordered data mode. Quota mode: disabled.
[    3.200443] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.233312] devtmpfs: mounted
[    3.287621] Freeing unused kernel image (initmem) memory: 424K
[    3.296730] This architecture does not have kernel memory protection.
[    3.302363] Run /sbin/init as init process
[    3.328207] process '/sbin/init.sysvinit' started with executable stack
[    6.228366] udevd[102]: starting version 3.2.14
[    6.388950] udevd[103]: starting eudev-3.2.14
[   16.731007] EXT4-fs (vda): re-mounted bbaaff5c-4d65-4007-8118-18273f80f0b3 r/w. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: Entering runlevel: 5
bootlogd: writing to console: Input/output error
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 

X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.10.14-yocto-standard #1 SMP PREEMPT Mon Oct 14 13:28:42 UTC 2024 mips
Kernel command line: dropbear.
root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 20 22:30:08 2024
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Starting rpcbind daemon...done.
pci id for fd 10: 1234:1111, driver (null)
MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri)
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemumips /dev/ttyS0

qemumips login: 