[    0.000000] Linux version 6.10.14-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 14.2.0, GNU ld (GNU Binutils) 2.43.1.20241111) #1 SMP PREEMPT_DYNAMIC Mon Oct 14 13:27:18 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000fd00000000-0x000000ffffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: using sched offset of 417301760 cycles
[    0.000001] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000003] tsc: Detected 2749.998 MHz processor
[    0.000854] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000884] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.000887] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.002769] found SMP MP-table at [mem 0x000f5440-0x000f544f]
[    0.002871] ACPI: Early table checksum verification disabled
[    0.002872] ACPI: RSDP 0x00000000000F5270 000014 (v00 BOCHS )
[    0.002878] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002882] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002885] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002887] ACPI: FACS 0x000000001FFE0000 000040
[    0.002888] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002890] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002892] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002893] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.002895] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.002896] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.002896] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.002897] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.002897] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.002898] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.002898] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.002923] Zone ranges:
[    0.002923]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002925]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.002926]   Normal   empty
[    0.002926] Movable zone start for each node
[    0.002927] Early memory node ranges
[    0.002927]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.002928]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.002929] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.003032] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.003049] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.003870] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.006691] ACPI: PM-Timer IO Port: 0x608
[    0.006701] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.006724] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.006726] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.006728] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.006729] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.006729] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.006730] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.006732] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.006733] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.006735] TSC deadline timer available
[    0.006739] CPU topo: Max. logical packages:   1
[    0.006740] CPU topo: Max. logical dies:       1
[    0.006740] CPU topo: Max. dies per package:   1
[    0.006743] CPU topo: Max. threads per core:   1
[    0.006744] CPU topo: Num. cores per package:     4
[    0.006744] CPU topo: Num. threads per package:   4
[    0.006745] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.006754] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[    0.006766] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.006767] Booting paravirtualized kernel on KVM
[    0.006768] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.006771] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.006924] percpu: Embedded 58 pages/cpu s199592 r8192 d29784 u524288
[    0.006945] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.006990] random: crng init done
[    0.007005] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.007013] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.007037] Built 1 zonelists, mobility grouping on.  Total pages: 130934
[    0.007194] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.007586] Memory: 475660K/523736K available (20480K kernel code, 2409K rwdata, 5684K rodata, 3440K init, 2156K bss, 47816K reserved, 0K cma-reserved)
[    0.007607] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.007620] ftrace: allocating 53066 entries in 208 pages
[    0.015895] ftrace: allocated 208 pages with 3 groups
[    0.015917] Dynamic Preempt: full
[    0.016029] rcu: Preemptible hierarchical RCU implementation.
[    0.016030] rcu: 	RCU event tracing is enabled.
[    0.016030] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.016031] 	All grace periods are expedited (rcu_expedited).
[    0.016032] 	Trampoline variant of Tasks RCU enabled.
[    0.016032] 	Rude variant of Tasks RCU enabled.
[    0.016032] 	Tracing variant of Tasks RCU enabled.
[    0.016033] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.016033] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.016036] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.016038] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.016038] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.019388] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.019567] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.019621] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.023957] Console: colour VGA+ 80x25
[    0.023993] printk: legacy console [ttyS0] enabled
[    0.144637] ACPI: Core revision 20240322
[    0.145400] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.147013] APIC: Switch to symmetric I/O mode setup
[    0.147995] x2apic enabled
[    0.148696] APIC: Switched APIC routing to: physical x2apic
[    0.150551] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.151601] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.153396] Calibrating delay loop (skipped) preset value.. 5499.99 BogoMIPS (lpj=2749998)
[    0.154519] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.155396] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.156398] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.157398] Spectre V2 : Mitigation: Retpolines
[    0.158128] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.158396] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.159397] Speculative Store Bypass: Vulnerable
[    0.160409] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.161396] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.162396] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.163397] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.164396] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.181546] Freeing SMP alternatives memory: 52K
[    0.182345] pid_max: default: 32768 minimum: 301
[    0.182410] LSM: initializing lsm=capability,landlock
[    0.183400] landlock: Up and running.
[    0.184412] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.185397] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.186559] smpboot: CPU0: AMD Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.187491] Performance Events: AMD PMU driver.
[    0.188295] ... version:                0
[    0.188399] ... bit width:              48
[    0.189092] ... generic registers:      4
[    0.189398] ... value mask:             0000ffffffffffff
[    0.190304] ... max period:             00007fffffffffff
[    0.190398] ... fixed-purpose events:   0
[    0.191074] ... event mask:             000000000000000f
[    0.191465] signal: max sigframe size: 1776
[    0.192208] rcu: Hierarchical SRCU implementation.
[    0.192399] rcu: 	Max phase no-delay instances is 400.
[    0.193361] smp: Bringing up secondary CPUs ...
[    0.193449] smpboot: x86: Booting SMP configuration:
[    0.194296] .... node  #0, CPUs:      #1 #2 #3
[    0.229456] smp: Brought up 1 node, 4 CPUs
[    0.231101] smpboot: Total of 4 processors activated (21999.98 BogoMIPS)
[    0.231853] devtmpfs: initialized
[    0.232632] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.233402] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.234420] pinctrl core: initialized pinctrl subsystem
[    0.235544] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.236481] thermal_sys: Registered thermal governor 'step_wise'
[    0.236482] thermal_sys: Registered thermal governor 'user_space'
[    0.237411] cpuidle: using governor menu
[    0.239201] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[    0.239400] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.240404] PCI: Using configuration type 1 for base access
[    0.241417] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.259399] raid6: sse2x4   gen() 24711 MB/s
[    0.276399] raid6: sse2x2   gen() 25664 MB/s
[    0.293407] raid6: sse2x1   gen()  6947 MB/s
[    0.294166] raid6: using algorithm sse2x2 gen() 25664 MB/s
[    0.311398] raid6: .... xor() 19192 MB/s, rmw enabled
[    0.312298] raid6: using ssse3x2 recovery algorithm
[    0.312450] ACPI: Added _OSI(Module Device)
[    0.313179] ACPI: Added _OSI(Processor Device)
[    0.313399] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.314209] ACPI: Added _OSI(Processor Aggregator Device)
[    0.314809] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.315896] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[    0.316446] ACPI: Interpreter enabled
[    0.317405] ACPI: PM: (supports S0 S3 S5)
[    0.318095] ACPI: Using IOAPIC for interrupt routing
[    0.318413] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.319399] PCI: Using E820 reservations for host bridge windows
[    0.320439] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.322184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.322402] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.323419] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.324424] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.325431] PCI host bridge to bus 0000:00
[    0.326119] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.326399] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.327399] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.328399] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.329398] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.330399] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.331399] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.332376] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[    0.332849] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 conventional PCI endpoint
[    0.334399] pci 0000:00:01.0: BAR 0 [io  0xc0c0-0xc0df]
[    0.335954] pci 0000:00:01.0: BAR 1 [mem 0xfebd0000-0xfebd0fff]
[    0.339399] pci 0000:00:01.0: BAR 4 [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.341400] pci 0000:00:01.0: ROM [mem 0xfeb80000-0xfebbffff pref]
[    0.342931] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[    0.344399] pci 0000:00:02.0: BAR 0 [io  0xc0e0-0xc0ff]
[    0.346096] pci 0000:00:02.0: BAR 1 [mem 0xfebd1000-0xfebd1fff]
[    0.348393] pci 0000:00:02.0: BAR 4 [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.350691] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 conventional PCI endpoint
[    0.352402] pci 0000:00:03.0: BAR 0 [mem 0xfe000000-0xfe7fffff pref]
[    0.354822] pci 0000:00:03.0: BAR 2 [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.356203] pci 0000:00:03.0: BAR 4 [mem 0xfebd2000-0xfebd2fff]
[    0.358401] pci 0000:00:03.0: ROM [mem 0xfebc0000-0xfebcffff pref]
[    0.359437] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.360904] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 conventional PCI endpoint
[    0.362399] pci 0000:00:04.0: BAR 0 [io  0xc000-0xc07f]
[    0.363849] pci 0000:00:04.0: BAR 1 [mem 0xfebd3000-0xfebd3fff]
[    0.366399] pci 0000:00:04.0: BAR 4 [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.369982] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 conventional PCI endpoint
[    0.371637] pci 0000:00:1d.0: BAR 4 [io  0xc100-0xc11f]
[    0.372955] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 conventional PCI endpoint
[    0.374517] pci 0000:00:1d.1: BAR 4 [io  0xc120-0xc13f]
[    0.375939] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 conventional PCI endpoint
[    0.377951] pci 0000:00:1d.2: BAR 4 [io  0xc140-0xc15f]
[    0.378964] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.379666] pci 0000:00:1d.7: BAR 0 [mem 0xfebd4000-0xfebd4fff]
[    0.381861] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[    0.383470] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.384575] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[    0.387399] pci 0000:00:1f.2: BAR 4 [io  0xc160-0xc17f]
[    0.388801] pci 0000:00:1f.2: BAR 5 [mem 0xfebd5000-0xfebd5fff]
[    0.390627] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[    0.392635] pci 0000:00:1f.3: BAR 4 [io  0x0700-0x073f]
[    0.394071] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.394445] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.395440] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.396439] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.397438] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.398453] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.399439] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.400443] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.401432] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.402403] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.403401] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.404404] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.405401] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.406401] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.407401] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.408402] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.409581] iommu: Default domain type: Translated
[    0.410384] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.410438] SCSI subsystem initialized
[    0.411094] ACPI: bus type USB registered
[    0.411408] usbcore: registered new interface driver usbfs
[    0.412318] usbcore: registered new interface driver hub
[    0.412402] usbcore: registered new device driver usb
[    0.413258] pps_core: LinuxPPS API ver. 1 registered
[    0.413399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.414401] PTP clock support registered
[    0.415049] Bluetooth: Core ver 2.22
[    0.415404] NET: Registered PF_BLUETOOTH protocol family
[    0.416293] Bluetooth: HCI device and connection manager initialized
[    0.416400] Bluetooth: HCI socket layer initialized
[    0.417227] Bluetooth: L2CAP socket layer initialized
[    0.417400] Bluetooth: SCO socket layer initialized
[    0.418266] PCI: Using ACPI for IRQ routing
[    0.464649] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.465396] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.465396] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.465402] vgaarb: loaded
[    0.465893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.466403] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.472445] clocksource: Switched to clocksource kvm-clock
[    0.473421] pnp: PnP ACPI init
[    0.474015] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.476228] pnp: PnP ACPI: found 5 devices
[    0.483629] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.485137] NET: Registered PF_INET protocol family
[    0.486003] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.487342] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.488740] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.490038] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.491359] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.492668] TCP: Hash tables configured (established 4096 bind 4096)
[    0.493742] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.494839] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.496031] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.497207] RPC: Registered named UNIX socket transport module.
[    0.498202] RPC: Registered udp transport module.
[    0.498969] RPC: Registered tcp transport module.
[    0.499759] RPC: Registered tcp-with-tls transport module.
[    0.500666] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.501754] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.502788] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.503834] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.505849] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.507000] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.508150] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.509502] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.510754] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.511930] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.513084] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.514347] PCI: CLS 0 bytes, default 64
[    0.515058] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x27a3bdae5c8, max_idle_ns: 440795216753 ns
[    0.517720] Initialise system trusted keyrings
[    0.518603] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.519817] NFS: Registering the id_resolver key type
[    0.520683] Key type id_resolver registered
[    0.521407] Key type id_legacy registered
[    0.522474] Key type cifs.idmap registered
[    0.530052] xor: automatically using best checksumming function   avx       
[    0.531263] Key type asymmetric registered
[    0.531935] Asymmetric key parser 'x509' registered
[    0.532758] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.533981] io scheduler mq-deadline registered
[    0.535624] io scheduler kyber registered
[    0.536317] io scheduler bfq registered
[    0.537210] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.541849] ACPI: button: Power Button [PWRF]
[    0.542930] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.544564] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.546150] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.550219] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.551971] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.553156] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.554721] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.556964] Linux agpgart interface v0.103
[    0.557735] ACPI: bus type drm_connector registered
[    0.558625] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.559555] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.562787] Console: switching to colour dummy device 80x25
[    0.563856] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.563857] [drm] features: -context_init
[    0.566993] [drm] number of scanouts: 1
[    0.567651] [drm] number of cap sets: 0
[    0.568604] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.570601] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.588623] Console: switching to colour frame buffer device 160x50
[    0.613282] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.618778] brd: module loaded
[    0.620154] loop: module loaded
[    0.621457] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.623684] virtio_blk virtio3: [vda] 822342 512-byte logical blocks (421 MB/402 MiB)
[    0.626882] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode
[    0.628395] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    0.629577] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.631245] scsi host0: ahci
[    0.631938] scsi host1: ahci
[    0.632657] scsi host2: ahci
[    0.633397] scsi host3: ahci
[    0.634112] scsi host4: ahci
[    0.634799] scsi host5: ahci
[    0.635382] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 lpm-pol 0
[    0.636873] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 lpm-pol 0
[    0.638368] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 lpm-pol 0
[    0.639865] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 lpm-pol 0
[    0.641380] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 lpm-pol 0
[    0.642874] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 lpm-pol 0
[    0.645450] e100: Intel(R) PRO/100 Network Driver
[    0.646519] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.647543] e1000: Intel(R) PRO/1000 Network Driver
[    0.648435] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.649486] e1000e: Intel(R) PRO/1000 Network Driver
[    0.650378] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.651453] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.652424] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.656145] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.657817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.659254] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.660455] hub 1-0:1.0: USB hub found
[    0.661135] hub 1-0:1.0: 2 ports detected
[    0.662359] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.664592] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.668094] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.676887] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.679542] hub 2-0:1.0: USB hub found
[    0.681115] hub 2-0:1.0: 6 ports detected
[    0.704916] hub 1-0:1.0: USB hub found
[    0.706645] hub 1-0:1.0: 2 ports detected
[    0.708500] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.710877] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.714192] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.716910] hub 3-0:1.0: USB hub found
[    0.718562] hub 3-0:1.0: 2 ports detected
[    0.721464] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.723692] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.727142] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.729869] hub 4-0:1.0: USB hub found
[    0.731470] hub 4-0:1.0: 2 ports detected
[    0.733342] usbcore: registered new interface driver usb-storage
[    0.736023] usbcore: registered new interface driver usbserial_generic
[    0.738725] usbserial: USB Serial support registered for generic
[    0.741188] usbcore: registered new interface driver ftdi_sio
[    0.743573] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.746638] usbcore: registered new interface driver pl2303
[    0.748930] usbserial: USB Serial support registered for pl2303
[    0.751576] i8042: PNP: No PS/2 controller found.
[    0.753693] mousedev: PS/2 mouse device common for all mice
[    0.756103] rtc_cmos 00:03: RTC can wake from S4
[    0.758966] rtc_cmos 00:03: registered as rtc0
[    0.760975] rtc_cmos 00:03: setting system clock to 2024-12-03T19:09:12 UTC (1733252952)
[    0.764419] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.767675] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.767732] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    0.770381] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.773380] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    0.779048] sdhci: Secure Digital Host Controller Interface driver
[    0.781137] sdhci: Copyright(c) Pierre Ossman
[    0.782665] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.784643] usbcore: registered new interface driver usbhid
[    0.786535] usbhid: USB HID core driver
[    0.787857] u32 classifier
[    0.788778]     input device check on
[    0.790072]     Actions configured
[    0.791343] NET: Registered PF_INET6 protocol family
[    0.793379] Segment Routing with IPv6
[    0.794646] In-situ OAM (IOAM) with IPv6
[    0.796000] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.798119] NET: Registered PF_PACKET protocol family
[    0.799423] Bridge firewalling registered
[    0.800090] l2tp_core: L2TP core driver, V2.0
[    0.800837] Key type dns_resolver registered
[    0.801641] NET: Registered PF_VSOCK protocol family
[    0.802943] IPI shorthand broadcast: enabled
[    0.804502] sched_clock: Marking stable (674002226, 129823517)->(876653208, -72827465)
[    0.805964] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.807488] registered taskstats version 1
[    0.808181] Loading compiled-in X.509 certificates
[    0.809702] Key type .fscrypt registered
[    0.810382] Key type fscrypt-provisioning registered
[    0.811384] Btrfs loaded, zoned=no, fsverity=no
[    0.813155] Key type encrypted registered
[    0.813934] printk: legacy console [netcon0] enabled
[    0.814769] netconsole: network logging started
[    0.918894] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.954785] ata6: SATA link down (SStatus 0 SControl 300)
[    0.957455] ata4: SATA link down (SStatus 0 SControl 300)
[    0.960089] ata5: SATA link down (SStatus 0 SControl 300)
[    0.962668] ata1: SATA link down (SStatus 0 SControl 300)
[    0.965284] ata2: SATA link down (SStatus 0 SControl 300)
[    0.967891] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.970744] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.973169] ata3.00: applying bridge limits
[    0.975192] ata3.00: configured for UDMA/100
[    0.977599] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.008175] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.010981] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.035853] IP-Config: Complete:
[    1.037598]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.041740]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.044118]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.044121]      nameserver0=8.8.8.8
[    1.048882] clk: Disabling unused clocks
[    1.051151] md: Waiting for all devices to be available before autodetect
[    1.053519] md: If you don't use raid, use raid=noautodetect
[    1.057174] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.061251] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.065142] md: Autodetecting RAID arrays.
[    1.066767] md: autorun ...
[    1.067778] md: ... autorun DONE.
[    1.076360] EXT4-fs (vda): mounted filesystem cc8bea94-1d61-4749-ad4a-e626a6acaa24 r/w with ordered data mode. Quota mode: disabled.
[    1.080633] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.082963] devtmpfs: mounted
[    1.085404] Freeing unused kernel image (initmem) memory: 3440K
[    1.087542] Write protecting the kernel read-only data: 26624k
[    1.089923] Freeing unused kernel image (rodata/data gap) memory: 460K
[    1.092253] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.159711] udevd[147]: starting version 3.2.14
[    1.163977] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.165658] udevd[147]: GOTO 'alsa_restore_std' has no matching label in: '/lib/udev/rules.d/90-alsa-restore.rules'
[    1.167693] udevd[148]: starting eudev-3.2.14
[    1.180867] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.319929] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.376252] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.443755] EXT4-fs (vda): re-mounted cc8bea94-1d61-4749-ad4a-e626a6acaa24 r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:48] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.9.1/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.129 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 353, uid: 1000, gid: 1000)[0m
00:00:00.129 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:239] Added client 2 to seat0[0m
00:00:00.129 [1;34m [c/debug/seatd/0.9.1/seatd/seat.c:563] Opened client 2 on seat0[0m
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCIbmzJrutFADhybAmEGhDfT+NUJ3LMEfXDkC/wlZmTHv0WwCFls+5vFXuinPu1N3w4MnT21oGknfQdas33vkeAEo8XJgmGA71u5tOCIMOK2+/I+hvWlMI5LfOGnug4uNmOXy8+1zj8/P1Q0Op5fD15SObS/UKv5WUUPOu95tyFq3hv2A2KyxzKdRnPEbo3392kpfvieY2B/ygw5fwaCa5C5gxF7QxoGVGanTIILQ0LR2YD+TOCWECaGxoVf7y4AxefcfF5YOIsxoyxy6UDXsyY3BV3u4nSAMQEuFFuJKlq1xg1Nupvh0ddEakZ+5j2E1cntfZHwwN28yZN/QJVntOt root@qemux86-64
Fingerprint: SHA256:Wwi8bZ10pMFAlNsENgQPAAL9W8flWjV8uyh7Bm/5HmQ
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    2.244978] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.247180] Bluetooth: BNEP filters: protocol multicast
[    2.249508] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 5.1 qemux86-64 /dev/ttyS0

qemux86-64 login: 00:01:05.066 [1;34m [c/debug/seatd/0.9.1/seatd/server.c:145] New client connected (pid: 5984, uid: 0, gid: 0)[0m
00:01:05.068 [1;31m [c/debug/seatd/0.9.1/seatd/seat.c:201] Could not add client: seat is VT-bound and has an active client[0m
00:01:05.069 [1;31m [c/debug/seatd/0.9.1/seatd/client.c:176] Could not add client to target seat: Device or resource busy[0m
